Question about 2004 Ford Fusion

1 Answer

Spilled milk under the rear seats in my 2006 Ford Fusion SEL.

Would it be a huge chore to pull up the seats to clean the milk up (a good amount of milk spilled and seeped down through the seat belt hole) or if it's just better to wait until the smell fades away...and the smell is pretty bad right now.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 127 Answers

Its not hard, the seats are meant to be removed fairly easily, there are two latches under the seat about a foot in from each edge that have to be released (i think you just reach up under and then its just like a trunk or glove box latch, then push back on the seat and lift up on the front and it should pull out.

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2009 fusion SEL has data compass error after being rear ended and a shop did repair.


WHAT IS A COMPASS ERROR FOR A 2009 FORD FUSION ...

www.fixya.com/cars/t16705785-compass_error_2009_ford_fusion
Feb 21, 2013 - WHAT IS A COMPASS ERROR FOR A 2009 FORD FUSION A MESSAGE COMES UP ON MY DASH SAYS COMPASS NO ... SOURCE: I HAVE A2009 FORD FUSION AND IT'S NOT GOING OVER 20 MPH ... Compass data error -- how do i determine my zone-- ... Jan 28, 2010 ' 2007 Ford Edge SEL Plus.

Compass - Ford Fusion Sport - Ford Fusion Forum

www.fordfusionforum.com/topic/9390-compass/
Jan 23, 2013 - Compass - posted in Ford Fusion Sport: 2011 Fusion SEL without navigation screen. Following windshield ... I have recalibrated and reset the compassaccording to the manual instructions (several times) but cannot correct the error. Can anyone help? ... picture of where it is: 2009-08-30_051718_2.gif.

Nov 08, 2015 | 2009 Ford Fusion

1 Answer

Removal of passenger seat on a 2006 ford fusion


there are four bolts.. 2 can be reached in the back seat and 2 up front just below the seat. remove four bolts and the seat should come right out. the bolts might be hidden under a plastic cover

Jul 18, 2012 | 2006 Ford Fusion

1 Answer

2007 Ford Fusion, electronic clicking sound under driver seat when slowing dow, stopping, stopped or upon resuming acceleration.


only the airbag connections under the seat ,but their is also a pressure sensor as well i think last time i cleaned the contacts on the airbag wires mtheir is a pyrotechnic device as well to pull the seat belt in if a collision ,so have a good look to try to see whats causing the noise ,sure you havent a coca cola can rolling around??

Mar 17, 2011 | 2008 Ford Fusion

1 Answer

My heated seat in my 2006 ford fusion won't turn on when engine is started it lights up and goes off. it lights up only right after starting


You really need a scanner to diagnose, along
with the service manual
Most likely a bad under seat blower assy.
Do you hear it running? Listen to the other side

Jan 27, 2011 | 2006 Ford Fusion

1 Answer

I have a 2006 ford fusion sel and the light bulb in center floor console is burned out. How do I change it?


You have to remove the cover around the gearshift, there you'll find the bulb, it's a small 12V bulb, just pull it out of the holder and install a new one.

May 20, 2010 | 2006 Ford Fusion

2 Answers

2006 Ford Fusion SEL - TPS


The TPS is an easy part to replace. It has 2 screws and 1 electric connector. It is about the size of a butane lighter and attaches to the metal airhorn.

There is only a slight adjustment possible for this part. One end has an elongnated slot for the screw. Just look at where the old part was adjusted and replace it that way. The only thing you need to watch is aligning the slot on the throttle shaft with the indentation on the TPS.

While you are replacing the part, disconnect the battery on the POS cable and this will reset the "check engine" light on the dash. Then reconnect and drive your car.

Apr 30, 2010 | 2006 Ford Fusion

1 Answer

What are the torque settings for 2006 ford fusion 3.0l sel wheel nuts/bolts


The service manual says 108 N-m (11.0 kgf-m, 79.6 lbf-ft).

Oct 10, 2009 | 2006 Ford Fusion

1 Answer

2006 FORD FUSION JERKING WHILE DRIVING!!!! HELP


Take it to the dealer as it is still under warranty.

Mar 27, 2009 | 2007 Ford Fusion I4 SEL Sedan

5 Answers

2006 Ford Fusion inside door handle stopped working


The plastic door handle is broken.
You will need to get a replacement door handle.
Go to http://www.flickr.com/photos/gtppilot/sets...57607539089979/
This should help. It is a set of photographs and instructions to do the job of replacing the handle.

Good luck.

Rgrdrake

Nov 11, 2008 | 2006 Ford Fusion

Not finding what you are looking for?
Cars & Trucks Logo

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...