Question about 2002 Ford Explorer

2 Answers

ABS ligth is on - 2002 Ford Explorer

Posted by on

  • geaeri95
    geaeri95 May 11, 2010

    If you have a light you have a trouble code. If you can get the code I can probably tell you what you need to replace.



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Your breaks need to be serviced. when they are being serviced the techs computer will turn off your warning light.hopefully its not something catascroffic if so good luck, big money. peace

Posted on Dec 15, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Ford Master
  • 5,763 Answers

You have to scan computer to pull codes to see what may be wrong. many times its a wheel sensor.autozone may be able to scan for you for free. if not have a garage do it.hope this helps.

Posted on Oct 04, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The abs system have the ligth on

If ABS light is on, most probably you have a problem with ABS. Scan your computer to get the falure, might be just a sensor and not the ABS. Get it repaired by an electronic sprecialist. Sometimes ABS can't be repaired and then you shoud install a new module.

May 15, 2015 | Cars & Trucks

1 Answer

Why is brake & ABS ligths are on in town & country 2008?

See my other answer to your IDENTICAL QUESTION.
It is only necessary to post your question ONCE.

Jul 23, 2014 | 2008 Chrysler Town & Country

1 Answer

My xterra some times the abs ligth on i was cleaned the sensor /new brakes/ flushing the oil/ and ligth still onill

First of all have the ABS scanned and check the history for codes that would zero it down to which one it is then check the wire for loose connection or corrosion.

May 13, 2014 | 1998 Volvo V70

1 Answer

Today my scion xd abs ligth and break ligth came on, what could be the problem and how unsafe can it be.

Well you can drive without ABS the brake light came on because the ABS. I would have it serviced they might tell you the ABS unit is bad you don't need ABS they just prevent your tires from locking up during heavy break use

Jan 30, 2011 | 2008 Scion Xd

2 Answers

I have audi a4 and the abs,asr and brake ligths

based on the age of the vehicle most likley the ABS module failed. Only way to know for sure is to get it diagnosed. There is nothing you can do at home without the proper tools. And no way can anyone guess accurately without testing. Codes are needed to proceed.

Jul 22, 2010 | 1998 Audi A4

1 Answer

ABS ligth on caravan 2003

Yes, The light should clear after fix the problem. Check the connection on the sensors. Theres 4, one at each wheel. If you have air in the lines the ABS light will come on. To bleed go left rear, right front, right rear, left front. Don't let the reservoir go dry. Brake fluid should be changed every 30,000 miles

Dec 16, 2009 | 2003 Dodge Caravan

1 Answer

It's possible clear a ABS warning light? The car display a Traction Control Fault problem. How it possible clear or reset this messages???


Sep 26, 2009 | 2000 Jaguar S-Type

1 Answer

I have a 93 g20 chevy in a very good shape, last week starts to make a sound (trrr)and turns on the abs ligth, I turns the switch off and on again and it fix the ligth off. could be the abs module, or a...

That sounds like the ABS pump. If you have 4 wheel ABS that pump has a history of problems Leave it alone if its working now. Pump is very expensive.

Mar 01, 2009 | 1993 Chevrolet G20

1 Answer

Abs indicator ligth on

Abs sensor fault, check the ressistance on all 4 abs sensors with disconnected wiring, it should be CA 1 Kohm +/- and volt in AC 1-5mv when turning the wheel, normally just enough with the ohm test.

Jan 08, 2009 | 2001 Saab 9-3

1 Answer

ABS Ligth On constantly on the dashboard .

sounds like a dodgy ABS sensor (change both) but while your there also check the condition of your brake pads

Dec 02, 2008 | 1998 Nissan Maxima

Not finding what you are looking for?
2002 Ford Explorer Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5613 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides