Question about 1994 Chevrolet S-10

1 Answer

How do i install hinge pins on a 1994 chevy s10?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 2,007 Answers

Pretty basic. Just hold your door up with a floor jack or block of wood, bang the pins up, replace the bushings, and install the bushings and pins. Do one at a time.

Posted on Oct 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove door hinges on 1997 chevy s10?


its probably the door hinge pins. use a floor jack to support the door. have it jacked up slightly to get the weight off the pins before removing. chevy should have a kit for it

Apr 24, 2014 | 1997 Chevrolet S-10 Pickup

1 Answer

Door pin and bushing


If your S10 is a 2001, your best bet is likely to be a junk yard

Jun 27, 2013 | Chevrolet S 10 Cars & Trucks

1 Answer

Can I install a 1994 Astro Van engine into my 1996 Chevy S10 truck


as long as they are both 4.3 v-six engines if not some alterations may have to be made at the mounts as well as transmission hookup

Jul 04, 2012 | Cars & Trucks

2 Answers

Trying to locate the ignition module for chevy blazer s10 1994


Ignition module sits in the ignition distributor, remove distributor cap, there will be two elec. harness plugs, the one with two wire's is for the pick up coil, the other one is for the ignition module, just unscrew module out of distributor and install new one.

Sep 23, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

How hard is it to replace the door hinges on a Chevy S10 P/U? Hinge pin kits WON'T HELP. The hinges are WORN OUT. I am an advanced DIYer. Can I do it myself, or must I take it to a shop? Any help will be...


its not bad to do it yourself. but it will take 2 people to do it. have your helper open the door and lightly lift it up so the pin is free then slide the pin up and out and then the door can move off the hinge so you can get the old brass sleeve out and replace it with the new one and slide the door back on and replace the pin. i would only do one hinge at a time and do the bottom one first.

Apr 22, 2010 | 2000 Chevrolet S-10

2 Answers

93 silverado 2500need free online mechanical diagram of doors


GM Full-Size Trucks 1988-1998 Repair Information Doors - REMOVAL & INSTALLATION

R/V Series
See Figures 1, 2 and 3
If the door being removed is to be reinstalled, matchmark the hinge position.
  1. If the door is to be replaced with a new one, remove the trim panels weathersheets and all molding.
efc6815.jpg

Fig. 1: Door hinge-R/V Series
  1. If the door is to be replaced with a new one, remove the glass, locks and latches.
  2. If equipped with a wiring harness, remove the trim panel and disconnect the harness. Guide the wiring out of the door.
  3. Support the door and remove the hinge-to-body attaching bolts. Lift the door from the truck.
  4. Install the door.
  5. Perform the alignment procedures indicated below.

3a1bddd.jpg

Fig. 2: Door hinge components-C/K Series

4ab81ea.jpg

Fig. 3: Removing the hinge spring


C/K Series
  1. On trucks with power components in the door, disconnect the battery ground cable.
  2. On trucks with power components in the door, remove the cowl side vent cover.
  3. On trucks with power components in the door, disconnect the wiring going to the door, under the dash panel. Feed the wiring through the door pillar.
  4. Cover the door hinge spring with a heavy towel. Using tool J-36604 or its equivalent, insert the blades of the tool between the spring coils and turn the barrel nut to compress and hold the spring. Remove the spring using the tool.
  5. Remove the lower hinge pin retainer.
  6. Using a plastic or rubber mallet and locking pliers, remove the lower hinge pin.
  7. Install a bolt through the lower hinges to hold the door while removing the upper hinge pin.
  8. Remove the upper hinge pin retainer.
  9. Remove the upper hinge pin.
  10. Support the door and remove the bolt from the lower hinge.

To install:
  1. Position the door and install the bolt in the lower hinge.
  2. Install the upper hinge pin. with the pointed end up.
  3. Install a new upper hinge pin retainer.
  4. Remove the bolt from the lower hinges.
  5. Install the lower hinge pin with the pointed end down.
  6. Install a new lower hinge pin retainer.
  7. Using tool J-36604, install the hinge spring.
  8. On trucks with power components in the door, connect the wiring going to the door, under the dash panel. Feed the wiring through the door pillar.
  9. On trucks with power components in the door, install the cowl side vent cover.
  10. On trucks with power components in the door, connect the battery ground cable.
ADJUSTMENTSee Figure 4 The holes for the hinges are oversized to provide for latitude in alignment. Align the door hinges first, then the striker.
C/K series utilize hinges that are welded to the door and frame. No adjustment is possible except when replacement hinges have been installed.

66b8749.jpg

Fig. 4: Door adjustment check points
  1. If a door is being installed, first mount the door and tighten the hinge bolts lightly.
If the door has not been removed, determine which hinge bolts must be loosed to effect alignment.
  1. Loosen the necessary bolts just enough to allow the door to be moved with a padded prybar.
  2. Move the door in small movements and check the fit after each movement.
Be sure that there is no binding or interference with adjacent panels.
  1. Repeat this procedure until the door is properly aligned.

R/V Series:
Door edge-to-rocker panel: 6mm Door edge-to-roof panel: 5mm Door edge-to-rear pillar: 5mm Door edge-to-front pillar: 2mm
C/K Series:
Door edge-to-rocker panel: 6mm Door edge-to-roof panel: 6mm Door edge-to-rear pillar: 4mm Door edge-to-front pillar: 7mm Door front edge-to-fender: 5mm
  1. Tighten all the bolts to 26 ft. lbs. (35 Nm).

Shims may be either fabricated or purchased to install behind the hinges as an aid in alignment.

Hope this help, TY for using Fixya (remember comment and rated this). Good luck.

Apr 01, 2010 | 1994 Chevrolet Silverado 2500

1 Answer

I have a chevy s10 and i need help to fix the door hinge and bushing. do i need a special tool? thanks michelle


I had an Isuzu with the same problem(they are the same car) have you made sure that the bushing is available,some hinges have hinge pins that
are rounded on both ends ans can't be removed without a grinder(this should be left to a pro) if it is a straight pin you can use a punch and hammer to take it apart,or you can replace the whole hinge(which I did)
Hope this helps a little

Nov 20, 2009 | 2002 Chevrolet S-10

2 Answers

Can't find fuse box


Should be on the drivers side dash end. At least thats where it was on a 98. Hope this helps.

Dec 28, 2008 | 1994 Dodge B Series Cargo

1 Answer

Transmiision for 1994 Chevrolet s10 blazer


if its the rear seal where the driveshaft enters the trans you need a transmission output seal for the tailshaft housing.

Sep 24, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...