Question about 1991 Toyota Pickup
I have a 1998 chevy metro and when the engine is warmed up it surges. we replaced the idle kickdown sensor on the back of the carb and that wasnt it. Idels great when cold but when it s warmed up it surges really bad at idle or when the clutch is pushed in. The rpms surge from around 1500 to 2000
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
those sensors could cause the issue, clean the MAF 1st, also clean the idle system using the following procedure, the IAC can cause cruise surge. I use this to cure these problems all the time.
Here is the most common cause of surges and stalls and low idle, it is the idle speed control air-bypass valve (IAC) and throttle valve, they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.
Posted on Jan 13, 2009
1990 22re same problem surge when pedal was depressed thought it was booster or check valve still didnt fix it i even put a brand new booster on it just to make sure still no fix it finnally went away on its own for about a month now it does it just sitting at an idle with out the brake pedal depressed traced all vaccum lines no problem there and still have no clue
Posted on Feb 21, 2009
hi sounds like your engine is surging due to incorrect mixture now your idle screw is on the thottle cable were it connects to the carb and the mixture screw is on the carb body as an approx guide turn the mixture screw fully in then out two and a half turns that should help but y may need to fine ajust later
Posted on Nov 15, 2009
Tips for a great answer:
Jan 19, 2015 | 1992 Eagle Talon
Jun 28, 2012 | Cars & Trucks
Feb 21, 2012 | 1997 Ford Expedition
Mar 26, 2011 | Ford Bronco Cars & Trucks
Aug 22, 2010 | 1998 Chevrolet Tracker
Feb 13, 2010 | Lincoln Town Car Cars & Trucks
Feb 09, 2009 | 1988 Chevrolet K1500
Sep 09, 2008 | 1987 Ford Bronco II
166 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: