Question about 1995 Chevrolet Lumina Apv

1 Answer

My 1995 chevy lumniawas hard to start at the ignition key.then it would not start. we had starter checked.its ok.what else could be wrong?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

You may want to look into getting a new ignition switch.

Posted on Oct 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Why wont my 1995 dodge caravan start , i turn ignition on all normal lights come on the dash as usual and i here fuel pump engage but when i turn the key it wont turn over at all and battery is good a

Check starter motor, give it a smack with a hammer, might turn over after that, this is a sign the stater motor brushes are most likely worn out. Or and check ignition switch below the ignition barrel.

Oct 20, 2014 | Cars & Trucks

1 Answer

95 chevy lumina starter drags hard to start

i think you need a new starter. my suburban cranked really slowly as well, a new starter fixed that problem

Mar 09, 2013 | 1995 Chevrolet Lumina

3 Answers

My son has a 6 cyl. 95 Camaro that will not turn over. He said lights and accessories seem ok. What should he start checking first? Starter? Solenoid? Terminals?

what happens if the lights are on and he attempts to start? do lights dim or is there no change? If lights dim the ignition is making contact but the starter is not engaging ! If lights do not dim then the ignition is not making contact. start at the starter and check for ignition wire contact. a small 12 - 14 gauge wire. try to cross terminals on the selonoid and see if car will turn over, ( starter engage ) if it does then one of two things, selonoid is bad , or the ign wire is bad, some have a fusable link in-line check for one. you can check the ign wire by using a test light, ground to a good ground and while a helper turns key to start position test wire for power (test light lights ) if there is power then selonoid is most likely to be the culprit.Be sure to support car on jack stands or use two floor jacks or one floor jack and one bottle jack !!!! for safety reasons, of course if only one jack is used and it fails the possibilities of death is 98%, the possibilities of serious injury 100%. also keep fingers clear of all moving object in case something does engage causing movement.

Jan 14, 2011 | 1995 Chevrolet Camaro

1 Answer

Car won't start. Just replaced battery, alterntor and fuel pump. Keeps on cutting off and won't crank.

check the wire from battery to starter and make sure its clean and tight! if wire is ok, it maybe in starter or starter solinoid. also check and be sure wire on ignition to starter is ok.make sure power is at or going through ignition switch. a bad ignition switch will cause many starting problems. if switch is bad, then dash lights will not go off when turning key off. check wiring and starter first. have a good day !

Dec 20, 2010 | 1995 Buick Regal

2 Answers

1998 Chevy Malibu : Won't Start

check connections from the battery to starter if ok tap on the starter with a hammer as a helper starts the engine if it starts replace starter before you do dose the key turn all the way forward normal starting position? reason i ask is why did you replace the ignition cyl lock?

Dec 24, 2009 | 1998 Chevrolet Malibu

1 Answer

Is it possible to bypass the ignition switch on a 1995 MonteCarlo

It could be the key. It has a Pass lock system with the chip in the key. Have the chevy dealer service department check the key for resistance. You cannot use a "copy" key cut at the hardware store. If you get a replacement key from the dealer the car might crank and start.

Jul 03, 2009 | 1995 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides