Question about 2003 Chevrolet Malibu

2 Answers

Trying to install wiring kit for trailer on a 2003 chevy malibu

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 436 Answers

Do you have the kit just for that car?? you need a module that will convert the separate signals and brake lites into one combined unit. there are different type of modules that do the job. there are cheaper ones about @$24 and much better ones for about $80. if you are doing just minimal towing the cheaper one will do but if you plan on long trips and tows then pay the extra for the good ones. Just go to trailer shops and ask these questions.

your convert will hookup as follows
drk blue - left turn light
lt blue - right turn light
white - brake light
brown - parking light
on the more expensive kits there will be a black power input wire that will have to hookup to the + line on the battery.

good luck

Posted on Oct 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 226 Answers

On the trailer plug
Yellow= Right turn/brake
Green= Left turn/brake
Brown is marker lights
white is the ground.
You might want to check with a parts store to see if a "hoppy" plug is available, it plugs into the factory harness and make it much easier and neater. Lee

Posted on Oct 04, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i wire up a trailer light harness to a 2010 chevy traverse?

Get a plug and play kit. They are usually available from your local parts store. This will save a lot of time and make the install much easier for about $30 us.

Rigid Connector

Oct 07, 2016 | 2010 Chevrolet Traverse

1 Answer

No power going to the trailer connection on 2003 Chevy suburban

check fuses also is it manufacture installed or after market installed. if manufacture installed check connections behind the connector. if after market installed check where they spliced wires into the tail light wires behind bumper and any where else that wires could be connected do you have tail lights and brake lights on the suburban send email to

Apr 02, 2013 | 2003 Chevrolet Suburban 1500

1 Answer

Location of low beam headlight wire on 08 Malibu

Removal of the inner skirt baffle is needed to gain access to the wires

Jan 09, 2010 | 2008 Chevrolet Malibu

1 Answer

I'm trying to install a trailer wiring kit. where would i find the wiring diagram for a 2003 Chrysler town country

At This has the most extensive wiring information and diagrams anywhere. It cost between $20-$30 for a 12-month subscription. I have used this site several times, and have never been disappointed.

Dec 30, 2009 | 2003 Chrysler Town & Country

1 Answer

Double-Din installation on a 2004 chevy malibu

check with the place she got the unit . we have no idea as to any of your question

Jan 04, 2018 | 2004 Chevrolet Malibu

1 Answer

Starter replacement in 2003 chevy malibu

disconnect negative battery terminal, raise vehicle,remove splash sheild, if equipped. take wires off of solenoid on starter, remove starter mounting bolts, remember not to mix up wires!! --to install--put starter back in vehicle put in bolts,hook up wires, then replace cable back on battery.

Aug 08, 2009 | 2003 Chevrolet Malibu

1 Answer

What is the wiring order from the distributor to the spark plugs on a chevy malibu 2003

Do you mean from the coil packs? 2003 malibu has no distributor. What engine do you have?

Jul 08, 2009 | 2003 Chevrolet Malibu

2 Answers

2002 chevy tahoe will not start

it may be the security system but i don't know how to bypass it. most security systems only prevent the original radio from being played if stolen from your car. but wouldn't affect a new radio. you may have to call a local dealer and ask them. the only other thing i can think of is when installing the new radio, you unhooked a wire or cut a wrong wire. good luck

Jun 23, 2009 | 2003 Chevrolet Malibu

1 Answer

How to wire in trailer lights.

there are kits available at auto parts stores that plug into existing brake lights. Some kits have modules that are necessary for proper signal to trailer lights.

Apr 23, 2009 | 2009 Chevrolet Express

2 Answers

Travel Trailer wiring, lights and electronic brake control

i have a 1996 chevy 1500 bought a brake controler but what wire do i put the blue wire to ther are 4 white wires from brake peddle that go on when peddle is pressed on.

May 27, 2008 | 1996 Chevrolet K1500

Not finding what you are looking for?
2003 Chevrolet Malibu Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides