Question about 1996 Mazda MX-6

Open Question

Just bought a second handcar with clarion ar3170 stereo, but don't know how to tune it? the car is about 13 years old.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dear all, I just bought a toyota vitz form japan and got a Clarion NX208 stereo. Could someone please advise me to set the language if possible or else the manual.Thanks. send email to brightlight.


see if you can find the menu for the radio as it will have a language section there for selection
clarion tech experts on line can advise on how to change it or a radio shop that specialises in clarion will know how to change it.

Dec 19, 2014 | Toyota Cars & Trucks

1 Answer

Just bought a used 1997 Jetta with 6 disk CD changer. The changer once was selectable through the Mode button on the Dash Radio, but it was unable to read the disk. Now the dash radio doesn't even select...


Your car is 13 years old. The lens on your disc reader is also 13 years old . They get extremely dirty. Especially if the changer is in the trunk. I'd try using a disc lens cleaner to see if that fixes the issue. Could be that its just worn out. Hard to say . Have you taken it to a stereo shop ? I'd take it to one of those before you take it to the dealer. The dealer will waaaaaaay over charge you for diagnostics on a cd changer where as a local stereo shop would Probly fix it for ya for next to nothing.

Aug 09, 2013 | 1997 Volkswagen Jetta

1 Answer

I just bought a 91 Honda accord, and the factory stereo was missing so I went out and bought the stereo installation kit also a new stereo but don't know how to mount without mounting brackets looked...


If you purchased an installation kit it should include universal mounting brackets. Perhaps you do not have an installation kit for installing your new stereo in your Accord. The kits are designed for installation of certain stereos in an Accord; not every model

Feb 24, 2013 | Cars & Trucks

1 Answer

Cannot enter code in car stereo - standard Clarion


If the stereo is the original stock stereo, contact your vehicle manufacturer.

May 22, 2012 | 2004 Mitsubishi Lancer

1 Answer

Have 2002 rodeo lse...what is brand of stereo? Want to purchase new factory stereo...bought one previously, that looked like installed one, but did not work because of tuner or amp issue.


There were probably different stereo unit options available but the particular stock stereo in my 2002 Rodeo was a "Clarion" Model No. P1-9993M (cassette player). I've since upgraded to a better aftermarket head unit so you are welcome to my old one if willing to pay shipping (ha,ha).

Aug 26, 2011 | 2002 Isuzu Rodeo

1 Answer

I got a 99 s10 that always pops an evap small leak detected code but never ran rough.Now this time the mil light came on I scaned it and its got a p0420 code and its been running rough. i know the cats...


The Cat is good,not if it is 12 years old

Only a select few last 14 years

O2 Sensors should be changed every 100,000 miles

Tune-up --- as in spark plugs?
No tune-up in my world, in the last15 to 20 years

ECM/PCM has been tuning all vehicles since 1980

An EVAP Code for a small leak or any evap issue,
obviously needs to be diagnosed & repaired within
a week,as you should with any OBD Codes,you don't
keep using the vehicle,you fix it

Jul 30, 2011 | 1999 Chevrolet S-10 Pickup

1 Answer

Clarion stereo in1997 mercury marquis wiring hook up to amplifer


make sure the speaker wires in the car do not have one side grounded.the output on the clarion is a floating output and cannot be grounded.the best solution is to look at the wiring on each of the speakers,and match them out to the ones on the clarion.the most common colr code is white front left,gray front right green rear left and purple rear right.each speaker has a plus and minus.mixing them up will result in the speakers being out of phase and result in poor bass performance.i would wire the wires directly to the clarion using crimp connectors.the first thing i would do is power up the stereo out of the car to 12 volts,and using a speaker make sure you have sound coming out.the yellow wire which is the clock/memory is a must to be connected to constant 12 volts or no sound can result

May 26, 2009 | 1997 Mercury Grand Marquis

1 Answer

1993 SAAB CSE LOCKED STEREO


If this stereo is a clarion and original equipment and uses a a four digit code. First thing you do is with the power on to the radio, push and hold the band button for a few seconds until you see the word "code" on the radio display. Input the code and radio should work. If that doesn't work, then if you have tried to input a wrong code several times then radio will lock out. So what you need to do is
the radio has to be on for one hour uninterrupted, then you can do the band button procedure , code input again and hopefully the radio goes on. Hopefully this helps. Please advise results
.

Feb 21, 2009 | 1993 Saab 9000 Hatchback

2 Answers

Car Stereo


If you go HERE you can get a new manual. other than getting a manual I don't know what more you could do. I'd try and see if anyone you know has one first.

Hope that helped,
AngellXP

Jul 20, 2008 | 1997 GMC Jimmy

1 Answer

Radio


check the fuse, I have had similar on 96 Cefiro (32)

Jun 23, 2008 | 1996 Nissan Maxima

Not finding what you are looking for?
1996 Mazda MX-6 Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...