Question about 2000 Chevrolet Tracker

1 Answer

How do you program a remote key for a 2000 Chevy Tracker after battery replacement?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 921 Answers

I heard this from a friend a long time ago and i believe he said after you put in batteries stand within 6 feet from the car hold down both lock and unlock buttons at the same time for about twenty seconds and while your holding it, it will make certain chirps/horn sounds...these noises are the car setting safety features like all doors unlock if it four door or only front doors and so on, but this is all i can remember...hope this helps!

Posted on Oct 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix an electrical problem with a 2000 chevy tracker


There are fusible links, usually located near the battery attached to the big red cable, or near the starter motor and again attached to the big main battery wire.

Oct 16, 2016 | Cars & Trucks

1 Answer

2002 chevy tracker overheating and losing power


Check for restriction in the exhaust. 2000 Tracker had a clogged catalytic convertor.

Dec 10, 2012 | 2002 Chevrolet Tracker

1 Answer

Chevrolet tracker starter replacement instructions. Battery charged but when you turn the key it makes a clicking noise.


thomas perkins should verify his info before posting; the autozone website DOES NOT have a chevy tracker repair manual available on line - so don't go there

Sep 28, 2011 | 1998 Chevrolet Tracker

2 Answers

Where is fuel filter located on 2000 chevy tracker


I have a 2000 Chevy Tracker and I would like to know the location of the fuel filter .

May 29, 2010 | 2000 Chevrolet Tracker

1 Answer

I need a serpentine belt/routing diagram 2000 chevy tracker.


For the 2000 Chevrolet Tracker:

Most modern vehicles have the Belt Routing Diagrams on the undeside of the Hood. But the sometimes disappear.

I do not know if you have the 1.6L In-Line 4-Cylinder, or the 2.0L DOHC In-Line 4-Cylinder. Nor what Engine Options you have (AC/No AC, etc.).

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/tracker/2000_chevrolet_tracker_drive_belt_routing_diagram.htm



Mar 27, 2010 | 2000 Chevrolet Tracker

1 Answer

Programming keyless entry key fob for 2000 chevy


you need to call the nearest chevy dealer with you vin, and get the part number from them, there are 2 numbers on the back of the remote, see if they match what the dealer tells you. Have an automotive locksmith program, should cost about 75.00 to do.

Jan 27, 2010 | 2000 Chevrolet Malibu

2 Answers

Unable to program my keyless remote for 2000 chevy malibu


take key fob to a cparts store , most have a tester on the counter

Jun 08, 2009 | 2000 Chevrolet Malibu

1 Answer

Reprograming a keyless remote


program transmitter code(s) as follows:
1) Confirm that all the doors are closed and the ignition key is out of the ignition cylinder.
2) Open the driver’s door. Insert the key and turn the ignition switch to ON position within 10 seconds.
3) Turn the ignition switch to OFF position within 10 seconds, remove ignition key from lock cylin-der.
4) Push and release the driver’s door switch (1) 3 times within 20 seconds.
5) Insert the ignition key and turn the ignition switch to ON position within 10 seconds.
6) Turn the ignition switch to OFF position within 10 seconds, remove ignition key from lock cylin-der.
7) Press and hold both LOCK and UNLOCK buttons (2) on the transmitter (3) for more than 5 seconds
within 20 seconds of removing the ignition key from the lock cylinder in step 6.
8) Press LOCK or UNLOCK button (2) on the transmitter (3) within 5 seconds (after step 7). All the
doors will lock/ unlock to confirm that this process has been properly done.
With this process, the transmitter has been programmed.
9) If you want to program an additional transmitter, repeat the procedure from Step 1) through Step 8).
10) Make sure that the keyless entry system properly operates by operating each transmitter.

Nov 08, 2008 | 2000 Chevrolet Tracker

Not finding what you are looking for?
2000 Chevrolet Tracker Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...