Question about 2000 Dodge Intrepid

Open Question

Where are the spark plugs on a 2000 dodge intrepid 3.2 liter engine

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: how to change spark plugs in 2001 intrepid

look for 1 inch black boxes near the top of your engine pull up on them plugs should be there

Posted on Jan 24, 2009

polarcycle
  • 1392 Answers

SOURCE: Loud clicking/clanking noise on 200 Intrepid

Sounds like the motor is going out. 2.7s are bad about rod bearings going out. If you don't use the correct weight oil, and change it every 3K, they don't hold up too well.

Posted on Jun 08, 2009

  • 1796 Answers

SOURCE: where are the spark plugs located on a 2001 dodge ...

Hi!!

They are on top of the motor, 3 on each side, just follow the wires from the coils. To access, you need to remove the two torx screws fastening each of the spark plug wire boot, and pull it out, the boot is about six inches long. You'll also need a 5/8" spark plug socket with a long extension and ratchet.

Don't forget to rate this post. Good Luck!!

Posted on May 23, 2010

c1apton15
  • 3400 Answers

SOURCE: I need to know what

Any good Ethylene Glycol based anti freeze - Prestone, Peak, etc...

Posted on Feb 22, 2011

ppeopleeater
  • 1 Answer

SOURCE: how do i disconnect the wire to the coil above the spark plug on

Simply insert a small flat blade screwdriver under the connector into the open slot and it will free the on coil ignition unit connector from the wiring harness.

Posted on Jan 14, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I locate the MAF/IAT sensor on a 2000 Dodge Intrepid?


At the air intake hose to the engine intake manifold.

Mar 27, 2015 | 2000 Dodge Intrepid

1 Answer

Can a 1999 2.7 liter motor from a dodge intrepid fit in a 2002 dodge intrepid that has a 2.7 liter motor are they the same


yes the engine is the same but you will probably have to use the enginge wiring harness and ecm (or computer) from 1999 intrepid to ensure that there will be no engine performance problems

Jan 10, 2011 | 2000 Dodge Intrepid

1 Answer

Why does my 2000 dodge intrepid have two plugs?


Are you referring to spark plugs? If so probably no, if you have a 4 cylinder engine you have 4 spark plugs, if you have a 6 cylinder engine you have 6 spark plugs and so forth.....

Dec 08, 2010 | 2000 Dodge Intrepid

1 Answer

2000 dodge intrepid 3.2 ltr v6 won't start.... turns over. It has a new alternator, new fuel pump & new plugs. Spark is coming from #2 coil & had each coil tested. Yet wires are not sending sparks...


Hello he forgives I have an intrepid shape 1998 with engine 2.7 he still has my serious question an engine 3.2 deu an intrepid 2001 graces my mail is. s_chavezcardiel@hotmail.com

Jul 14, 2010 | 2000 Dodge Intrepid

1 Answer

Can you give me a spark plug wiring diagram for a 1995 Dodge Intrepid?


1995 Dodge Intrepid 3.3 liter V-6 VIN "T"

9c7fa62.gif


1995 Dodge Intrepid 3.5 liter SOHC V-6 VIN "F"

084a3e3.gif


Hope this help (remember comment and rated this).

Apr 08, 2010 | 1995 Dodge Intrepid

1 Answer

My check engine light says that my primary and secondary cylinders arnt firing, can anyone tell me the firing order so I know what ignition coils to change


Check this firing order for all Intrepid engines...

2001 Dodge Intrepid 2.7 liter DOHC V-6 VIN "R"
or
2001 Dodge Intrepid 2.7 liter DOHC V-6 VIN "U"
or
2001 Dodge Intrepid 2.7 liter DOHC V-6 VIN "V"
or
2001 Dodge Intrepid 3.2 liter SOHC V-6 VIN "J"


5d41214.gif


Hope helps (remember rated this).

Apr 08, 2010 | 2001 Dodge Intrepid

1 Answer

2000 dodge intrepid fuel pressure port? i cant find location to check pressure


It's along the fuel injector rails. With the engine not running the fuel line primed should read 55psi and 46psi with the engine idling and the manifold vacuum applied for the 3.3 liter. With the engine not running the fuel line primed should read 48psi and 39 psi with the engine running and the manifold vacuum applied for the 3.5 liter. Good luck and hope this helps.

Jun 23, 2009 | 2000 Dodge Intrepid

1 Answer

Timing on a 2000 dodge intrepid


dear friend-if the compression is ok and you have checked the timing and there is spark and feul your vehicle should start.

Mar 17, 2009 | 2000 Dodge Intrepid

1 Answer

How to change spark plugs in 2001 intrepid


look for 1 inch black boxes near the top of your engine pull up on them plugs should be there

Jan 19, 2009 | 1999 Dodge Intrepid

Not finding what you are looking for?
2000 Dodge Intrepid Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...