Question about 2005 Pontiac Vibe

1 Answer

Change front rotors on a pontiac vibe 2005 - 2005 Pontiac Vibe

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 881 Answers

IFyou have a bad viberation in the front disc when braking all you need to do is to remove both disc,s
and take them to the brake people to have them
Surface ground and then get a set of Disc pads to replace the old ones {DO NOT use the ones you take out as they will be to hard and worn},so get a set of PRIME if you can get them and all your troubles are fixed.. Have a G"Day

Posted on Oct 04, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 39 Answers

SOURCE: where is the cabin air filter in a 2005 pontiac vibe?

Hi Ncrver,

The Cabin Air Filter is located inside of the glove compartment.

Best of luck,

Lazaruselite

Posted on Feb 24, 2009

  • 1 Answer

SOURCE: horn doesn't work on 2005 Pontiac Vibe. Can't

On the 06 Vibe the horn is located just to the right of center, almost below the hood latch, in front of the radiator. It looks like a small round speaker...
check to make sure the wire is plugged in, it can come lose or even fall out. it is easy to check and fix.

If that does not work, my best guess would be that either the horn is blown or the wiring is messed up.

good luck.

Posted on Apr 02, 2009

  • 1 Answer

SOURCE: tranmission solenoid 2005 pontiac vibe

we had the computer code p2716 on our 2005 pontiac vibe -shift solenoid. gm says to replace the pcm before you do anything else.  we tried this and it works.

Posted on Apr 12, 2009

Suraido
  • 195 Answers

SOURCE: 2005 Pontiac Vibe heater fan working on high only

Nope, you just need the change the heater resistor pack. This is the part that controls the fan speed and it is fairly common that it burns up and only works on high. Usually the resistor pack is located behind the glove box in the cabin of the vehicule, either in the heater motor assembly or somewhere in a vent duct. The second option is the most common, as most companies prefer putting it in the duct instead of in the moto assembly cause it makes it faster to change, and therefore costs them less man hours to change it if it breaks under warranty.

Posted on Jul 31, 2009

carsandcomps
  • 722 Answers

SOURCE: adjusting the parking brake on 03 pontiac vibe

If you look under the van on the driver side (usually) you'll see where the two cables from the rear inter-connect with the main cord to the front. Here, you should find an adjustable bolt that you can tighten. If it is not here, it may need to be tightened from there rear tires.

If you have drum brakes in the rear, these are most likely "self-adjusting" brakes, which may interact with the emergency brake. Everytime you back up, and apply the brakes, you are activating the self adjuster (you would have seen this located at the bottom of the brake system between the two brake pads. This is the self adjuster. Try going in reverse at about 5 miles per hour, and hitting the brakes firmly (not slamming on them). Drive forward again, and firmly press the brakes. Go in reverse again, and apply brakes firmly again; (do this about 4 or 5 times to get the rear brakes adjusted). Try the emergency brake again and if still not tighter, purchase or look in your repair manual as to how to adjust the emergency brake.

Please let me know if you need further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

Posted on May 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do the procedure to change water pump on 2007 vibe same as 2005 vibe?


My reference shows 2004-2008 as being similar for the Vibe. Some minor changes occur from year to year as from model to model, but the basic procedure for this remains the same in those model years.

Mar 28, 2012 | 2007 Pontiac Vibe

1 Answer

Trying to change headlight bulb on 2005 pontiac vibe. Can't figure out how to get the spring back on.


put slight pressure on the spring ,and push it forward to [the front]and then gently turn right/left the spring will fall forward.adrian,,,,

Dec 11, 2010 | 2005 Pontiac Vibe

2 Answers

How to replace front rotor on 2005 pontiac vibe?I have removed caliper and caliper bracket do I need to remove axle nut and if so how?


once the caliper and bracket are removed, the rotors should just come off. These are hat style rotors and just slip over the hub. They do have a tendency to rust on, sometimes hitting them with a hammer between the studs will break them loose. some rotors have threaded holes between teh wheel studs that you can screw a bolt into to break them free.

Oct 16, 2010 | 2005 Pontiac Vibe

1 Answer

I dont know how to get front rotors off


Problem with 2003 Pontiac Vibe i dont know how to get front rotors off

Sep 05, 2010 | 2003 Pontiac Vibe

1 Answer

How do you remove the front brake rotor on a 2005 Pontiac Vibe?


To remove the brake rotor, you must first remove the brake pads and caliper. There are two bolts that hold the brake caliper in place. Remove the two bolts and tie the caliper up out of the way. Be careful not to break the brake line connected to the back of caliper. Once the caliper is removed, simply slide the rotor off. To install a new rotor, simply slide rotor over studs and replace the caliper with new brake pads. It is as simple as that.

Jun 16, 2010 | 2005 Pontiac Vibe

1 Answer

On my 2005 Pontiac Vibe the heater fan does not work all the time


If it works some times then it is probably the switch.

Jan 25, 2010 | 2005 Pontiac Vibe

1 Answer

I am trying to replace the front rotors on a 2003 pontiac vibe.


Your Vibe may have phillip screws that hold the rotor to the hub you need to remove first, my 2004 did not, but because Pontiac uses Toyota brake parts on the 2003's you may have them. Use the right size phillips screw driver with a very good point and don's strip them.

Feb 14, 2009 | 2003 Pontiac Vibe

1 Answer

Tranmission solenoid 2005 pontiac vibe


we had the computer code p2716 on our 2005 pontiac vibe -shift solenoid. gm says to replace the pcm before you do anything else.  we tried this and it works.

Dec 16, 2008 | 2005 Pontiac Vibe

Not finding what you are looking for?
2005 Pontiac Vibe Logo

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...