Question about 2004 Chevrolet Suburban
My radio / cd player and additional audio signals (like locking the door "beep" etc..) on a 2003 chevy suburban is not working. I had the radio out of the car and put a known working radio back in and that one didn't work either, so I don't think its the radio itself. I also checked all the appropriate fuses and didn't find any bad ones........... any ideas?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Radios in the 2004 Impalas are tied to the vehicle's VIN through the computer, so it may be somewhat difficult to get the code. However, the following steps should work:
1. Press and hold the buttons for presets 1 & 4 (may be 2 & 3). The word "SEC" should show.
2. Press the "MIN" button. "000" should be displayed.
3. Press the "MIN" button again to have the second two numbers appear. Record these numbers.
4. Press the "HR" button for the first two numbers to appear. Record these numbers. -- Note: Your number sequence should be the numbers from the "HR" button followed by the numbers from the "MIN" button.
5. Call 1-800-537-5140. This will get you to the GM unlock code automated line. Ignore the prompt and enter "202108#". Next enter your code (remember, HR then MIN) followed by the * key. For example, 1234*. A 3 or 4 digit code will be given to you. If you get a code such as 0532, drop the zero when entering it into your radio.
6. Enter the code into the radio IAW the applicable manual.
Posted on May 30, 2008
If the radio powers up, it's not a fuse problem. At least not with the radio itself. The door locks are most likely unrelated. We can address them separately. One thing at a time though.
My first suggestion would be to check for an engaged mute option. If that isn't it, my 2nd choice is the box that you mentioned, that the radio connects to. That is what is drawing my attention.
However I need to know more.
A bit of Question and Answer is needed to help you out. Just comment me back with the answers. OK?
Posted on Jan 22, 2009
You need to attach the blue wire on the stereo harness to the blue and white wire on the car adapter harness. they installed a small amplifier to power the rear door speakers and unless you connect those two wires then the speakers will not work.
Posted on Apr 19, 2009
Tips for a great answer:
Jan 31, 2017 | Cars & Trucks
Apr 06, 2015 | 2003 Chrysler Town & Country
Nov 24, 2013 | Cars & Trucks
Oct 14, 2012 | 2004 Mazda RX-8
Oct 07, 2012 | 1999 Chrysler Concorde
Jan 30, 2010 | 2009 Chevrolet Cobalt
Apr 27, 2009 | 2001 Honda Civic
Jan 21, 2009 | 1999 Chevrolet Suburban
May 17, 2008 | 2000 Renault 181
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: