Question about 2009 Chevrolet Equinox

Open Question

I have a transport mode on message on the sytem display.

The "transport mode on" system display is on along with a flashing battery symbol. What is this and how do i make it go away? Does this require a dealership trip?

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Transport Mode On message along with flashing

This is the mode that vehicles are shipped in so that the batteries dont die....It is easy to correct...All you need to do is turn the key to the on position and keep holding it as forward as possible for over 15 seconds...

A message will come up "Transport Mode Off". The battery light will go off and your clock will operate properly.

Thats the trick and works on 2010 Camaro, Equinox, Traverse, Lacross and other vehicles.


Posted on Oct 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

98 Oldsmobile Aurora There's a on my Dash it says information center and has the oil fuel speed all that it says low oil is there any way anybody knows how to reset that


Check your engine oil using the oil dipstick located on the engine - you need to add oil to the fill line as shown on the dipstick. You should have the oil replaced regularly (every 3-6 months) and keep your eye on the level if the engine is leaking oil underneath or burning a lot of it.

Mar 08, 2017 | Oldsmobile Cars & Trucks

Tip

Ford-Lincoln service light 1988-01


LS

2000-01

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the STATUS control to access the System Check mode. Press the RESET button to display OIL LIFE _% RESET FOR NEW. Press and hold the RESET button until OIL LIFE IS 100% is displayed.


Mark VIII


1993-97

When "CHANGE OIL SOON" or "OIL CHANGE REQUIRED" is displayed on the Message Center, turn the ignition on. Press and hold "OIL CHANGE RESET' or the "RESET" button until "OIL LIFE RESET TO 100%" is displayed on the Message Center.


Continental


1989-94

When "SERVICE" is illuminated, on the Message Center, press the "SYSTEM CHECK" button on the right of the display. Then press the "RESET" button. The "SERVICE" symbol and mileage will start to flash. Next, press the "SYSTEM CHECK" and "RESET" buttons at the same time. The display will show "7,200 miles/11,580 km" and will count down from there as long as the buttons are depressed. Release the buttons at the desired service interval.


Continental


1988

When "SERVICE DUE" is illuminated on the Message Center, press the "CHECK OUT" button located below the display. Then press the "RESET" button. The display should now read "SERVICE DONE?" Next, press the "CHECK OUT" button and "RESET" buttons at the same time. The display will show "7,200 miles/11,580 km" and will count down from there as long as the buttons are depressed. Release the buttons at the desired service interval.







on Dec 07, 2009 | Ford Lincoln Continental Cars & Trucks

1 Answer

What is calibrate compass on 2004 Buick Rendezvous


Manual Compass Calibration If the compass appears erratic and the calibration symbol does not appear, you must manually put the compass into the calibration mode. To get into this mode, do the following: 1. Turn the ignition on and cycle the DIC to the compass/temperature mode. 2. Press and hold the SET button for longer than three seconds. ZONE # PRESS & HOLD SET TO CHANGE: This display mode will be displayed when you are manually calibrating the system. The current zone number for compass variance will be displayed in place of the # symbol. Use the SET button to select the zone number from the graphic shown to select the current area of the country that you are driving in. PRESS SET TO CALIBRATE COMPASS: After selecting your zone, press the MODE button and this will be displayed on the DIC. Press the SET button and complete three 360 degree turns in an area free from large metal objects. The following two messages will toggle in the display until you calibrate the compass: • DRIVE VEHICLE IN CIRCLE • CALIBRATING COMPASS When calibration is complete, the display will return to its normal mode. 3-61 info obtained from MANUAL OWL
press the helpful button and follow me on fixya for more tips

Compass Variance Zone Procedure DIC Compass Driver Information Center DIC...

http://www.manuals365.com/swf/buick/2004_buick_rendezvous_owners.html?page=200

http://repair.chiltondiy.com/Buick/Rendezvous/Repair-Manual-Online
http://www.repairservicemanuals.com/Buick

Feb 02, 2016 | Buick Cars & Trucks

1 Answer

What is calibrate compass on 2004 Buick Rendezvous Vous


Manual Compass Calibration If the compass appears erratic and the calibration symbol does not appear, you must manually put the compass into the calibration mode. To get into this mode, do the following: 1. Turn the ignition on and cycle the DIC to the compass/temperature mode. 2. Press and hold the SET button for longer than three seconds. ZONE # PRESS & HOLD SET TO CHANGE: This display mode will be displayed when you are manually calibrating the system. The current zone number for compass variance will be displayed in place of the # symbol. Use the SET button to select the zone number from the graphic shown to select the current area of the country that you are driving in. PRESS SET TO CALIBRATE COMPASS: After selecting your zone, press the MODE button and this will be displayed on the DIC. Press the SET button and complete three 360 degree turns in an area free from large metal objects. The following two messages will toggle in the display until you calibrate the compass: • DRIVE VEHICLE IN CIRCLE • CALIBRATING COMPASS When calibration is complete, the display will return to its normal mode. 3-61 info obtained from MANUAL OWL
press the helpful button and follow me on fixya for more tips

Compass Variance Zone Procedure DIC Compass Driver Information Center DIC...
http://www.manuals365.com/swf/buick/2004_buick_rendezvous_owners.html?page=200
http://repair.chiltondiy.com/Buick/Rendezvous/Repair-Manual-Online
http://www.repairservicemanuals.com/Buick

Feb 02, 2016 | Buick Cars & Trucks

1 Answer

Change clock on Pontiac g6


There is 2 different radios. With or without rds. Here are the instructions for both.
Setting the Time for Radios with Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.
To synchronize the time with an FM station broadcasting Radio Data System (RDS) information, press and hold the clock button to enter the clock set mode, then press and hold the clock button for three seconds until UPDATED displays. If the time is not available from the station, NO UPDATE displays.
RDS time is broadcast once a minute. After tuning to an RDS broadcast station, it can take a few minutes for the time to update.
Setting the Time for Radios without Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes flash. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.

Mar 08, 2015 | Pontiac G6 Cars & Trucks

1 Answer

My 2009 Journey has built in Dvd. How do I plug a monitor into the back of it?


NOTE: REQ radios only must be put into "Transportation Mode" before removal. With Ignition in RUN or ACCESSORY, press SET and DISC simultaneously until the radio displays "TRANSPORTATION" on the display or for 5 seconds.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument panel center bezel.
  3. Remove the radio display mounting fasteners.
  4. Carefully pull the radio display out as necessary
  5. Remove the radio display from the vehicle.
    You'll want to avoid removing any of the electrical connectors as most cars have an anti theft system that will require you to have your computer flashed at the dealer if they are disconnected.

Aug 14, 2012 | 2009 Dodge Journey

1 Answer

2010 Equinox has a mesage "transport mode on" & the battery indicator is on. What is the problem?


This is the mode that vehicles are shipped in so that the batteries dont die....It is easy to correct...All you need to do is turn the key to the on position and keep holding it as forward as possible for over 15 seconds...

A message will come up "Transport Mode Off". The battery light will go off and your clock will operate properly.

Thats the trick and works on 2010 Camaro, Equinox, Traverse, Lacross and other vehicles.

Sep 12, 2010 | 2009 Chevrolet Equinox

1 Answer

How do i clear the change engine oil soon message. It's a 2007 silverado.


The "Change Oil" message displayed on your Chevrolet Silverado's gauge cluster is part of the Oil Life Monitoring System, standard on many GM (General Motors) vehicles. The message appears when it's time for an oil-change; the interval is based on your driving habits (for example, it may appear more frequently if you engage in a lot of stop-and-go traffic). Once you change your Chevy's oil, the message will not disappear; the system must be reset. The process is a bit different between Chevy Silverado models.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Difficulty: Moderately Easy Instructions
    2007 to 2010 Chevrolet Silverado
  1. Step 1 Insert your key and turn the ignition to position "C" (Run/On) without starting the engine.
  2. Step 2 Press the second button from the top on your information center (next to the steering column, car symbol) until "Oil Life" displays on your odometer cluster.
  3. Step 3 Press and hold the "Reset" button on your information center (check mark symbol) until the "Oil Life" display changes to 100 percent.
  4. Step 4 Turn your ignition to position "A" (Lock/Off).
  5. 2002 to 2006 Chevrolet Silverado
  6. Step 1 Insert your key into the ignition, and turn it to position "A" (Run/On) without cranking the engine.
  7. Step 2 Depress the gas pedal three times within five seconds. The "Change Oil" message will begin to flash.
  8. Step 3 Turn the ignition to position "A" (Lock/Off) once the light stops flashing (about 10 seconds).

Jul 12, 2010 | 2007 Chevrolet Silverado 1500HD

2 Answers

Transport Mode On message along with flashing battery light on.


This is the mode that vehicles are shipped in so that the batteries dont die....It is easy to correct...All you need to do is turn the key to the on position and keep holding it as forward as possible for over 15 seconds...

A message will come up "Transport Mode Off". The battery light will go off and your clock will operate properly.

Thats the trick and works on 2010 Camaro, Equinox, Traverse, Lacross and other vehicles.


Sep 23, 2009 | 2009 Chevrolet Equinox

1 Answer

Security lights flashing after battery cable removal-no start


Anytime you disconnect and reconnect your battery, the factory alarm will arm upon reconnection and the truck will not start. You have to close your doors, then manually lock and unlock the door with your key. This should turn off the security system and you should be able to start the truck.

Nov 16, 2008 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
2009 Chevrolet Equinox Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...