Question about 2000 Honda Accord

1 Answer

I have a 200 honda accord ex 6cyl vtec has 112000 miles put new plugs and new egr but i still get a p01399 random misfire code can you help?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Contributor
  • 1,326 Answers

Try checking the ignition coil or the plug wires. You can also check the distrubuter cap/rotor for corrosion or worn points and your fuel filter. All these can factor in your misfire. Could also be a fuel, vacuum or cam sensor problem so start with the simple things first.

Posted on Oct 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have a 1997 honda acccord lx with a vtec engine i got the check engine light and scanned, recieved dtc code p1259 vtec system failure the symptoms are it driving normal until it reaches 3,500 rpm


If this is a 1997 LX Accord, it did not come with the VTEC, that was only on the EX version in 1997. So someone put an EX VTEC engine in your LX. I've seen this done, and it requires a EX pcm computer. It also needs VTEC wiring to be installed. Check the engine serial # and ID what this engine is from.
If this is actually an EX Accord, then there are more things that can fail than the solenoid. The pressure switch is a common failure.

Oct 21, 2014 | 1997 Honda Accord

1 Answer

1997 honda civc 4 trouble codes po301,po302'po303'po304


All cyls misfiring. 97 honda. How many miles?Sounds like plug wires or a wet distributor cap. Yet if it is a Vtec The misfires could be occurring after the cams engage. Possible VTEC solenoid issue.

Apr 05, 2013 | 1997 Honda Civic

2 Answers

Misfiring code po1399 cylinder 3 and 4


On most Honda's when you get a misfire happening across the whole engine like that there are a few likely issues. the ignition coil if it's a single coil style or the connector at the distributor. They also have some issues with EGR's and plugged ports which can mess with the fuel trim numbers. It's important to check the fuel pressure and if possible a timing offset spec from the scanner whenever you're dealing with misfires on any vehicles Honda or not and determine correct pressure and flow whenever possible.


Hope this helps.

Aug 02, 2012 | Acura Cars & Trucks

2 Answers

After going over 40mph the check engine light goes on n it gives the code 440


How did you read that code on your car? A 92 Accord is supposed to give you pre-OBD honda codes, which are all below 100. Please check the code again and re-post it.

Jan 04, 2011 | 1992 Honda Accord

1 Answer

I have a 2000 honda accord ex... My engine light is on and throwing the p1259 code. It is not a Vtec engine... help. I just got the oil changed and the light is still on. However they put 10w30 in.. should...


The P1259 : is problem in the VTEC Oil Pressure Switch circuit or VTEC Solenoid Valve circuit.
check the wire on the VTEC Oil Pressure if it's loose.

Feb 18, 2010 | 1997 Honda Civic

4 Answers

Po300 random mulitple misfire detected p1399 misfire any cylinder


If only one of your cylinders was misfiring, you probably would be getting a more specific code than P1399.
Also check the distributor rotor along with the cap and coils and wires (as mrgreenz suggests); the EGR valve to make sure it doesn't leak; your fuel pressure which can cause random misfires if the pressure is too low; and injectors if they are really dirty. If you have really high mileage, I probably would first just change out the plug wires with a new set, then reset the DTC and see if the code comes back.
Hope this is helpful as well.

Nov 27, 2009 | 2000 Honda Accord

1 Answer

2000 ex v6 honda accord code p01399


it could be the coil or distrubutor cap

Sep 11, 2009 | 2000 Honda Accord

Not finding what you are looking for?
2000 Honda Accord Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...