Question about 2003 Toyota 4Runner
I have been at toyota dealer for cutting extra kee. After that vsc and vsc off light allways on when suv on running gear.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
ypu can not buy them any where, i had the same problem.you have to order them from a toyota dealer. they are very inexpensive.. i tried different bulbs radio shack didnt work.
Posted on Jan 12, 2009
SOURCE: Replace rotors on 2003 4runner
I have never changed it on a 4runner yet, but it's all pretty much the same. Jack the car/truck up, take off the wheel. Loosen the 2 or more bolts holding the caliper to the wheel spindle (the caliper is the C shaped part holding the pads). Take off the caliper, being careful not to rip or break the brake hoses that are bolted to the caliper. DO NOT TAKE THE HOSES OFF! it seems tempting to save time and be sure not to break them, but if you take them off the calipers you will need to bleed the air out of the system, which usually takes a bit of time. Just rest the caliper on the suspension table or any place where it won't fall too easily and where it wont put the hoses in danger. Now with the caliper off, both the pads and the disc should be free to move and remove. On some models the pads are hooked directly to the caliper, and some others like the ones on my toyota echo are in a holder the bolts back on to the caliper. The disc is usually just resting on the wheel studs and should be able to be removed without doing anything to it. In some rare cases, there will be one bolt holding it back, but its just there for centering purposes and is not necessary. So just put the new disc back on, put the pads back on the caliper or in the holder depending on the model, then bolt the caliper assembly back into place and put the wheel back on. And your done, you just need to put the car down and take the jack out.
Posted on Jul 08, 2009
Check your switches for the VSC, some get bumped on (due to their location) and some get stuck in the "on"position.
Posted on Aug 04, 2009
NEED TO HAVE COMPUTER CHECK FIND WHAT CODE MADE THE ENGINE KLIGHT COME ON.. AND HAVE IT FIXED,, VSC LIGHTS COME ON BECAUSE THE COMPUTER DEACTIVATES THE VSC AS A SAFETY FEATURE WHEN CK ENGINE LIGHT IS ON
Posted on Aug 08, 2009
Tips for a great answer:
Jan 01, 2011 | 2004 Toyota 4Runner
Nov 27, 2010 | 2003 Toyota 4Runner
Aug 20, 2010 | 2003 Toyota 4Runner
May 10, 2010 | 2001 Toyota 4Runner
Feb 07, 2010 | 2004 Toyota 4Runner
Jul 30, 2009 | 2002 Toyota 4Runner
Jun 04, 2009 | 2003 Toyota 4Runner
Aug 21, 2008 | 2003 Toyota 4Runner
Apr 13, 2017 | 2003 Toyota 4Runner
Jun 05, 2015 | 2003 Toyota 4Runner
181 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: