Question about 2006 Pontiac GTO

1 Answer

Oil sensor replacement for 2006 GTO

2006 Pontiac GTO-
Want to know how much and oil sensor cost, where it is located on the car and can i replace it myself? It keeps coming on when i step on it.

Posted by on

  • Anonymous Mar 22, 2014

    remove radiator

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,596 Answers

COST Around $25 - $35 and Fallow these Instructions PLEASE RATE ME!!!!!

Engine Oil Pressure Sensor and/or Switch Replacement

Tools Required

  • J41712 Oil Pressure Switch Socket
Removal Procedure
Disconnect the oil pressure sensor electrical connector (1).
  1. Important: Clean the area around the sensor before removal. This prevents debris from entering the engine. Use J41712 to remove the oil pressure sensor from the engine block.
Installation Procedure
  1. If installing the old sensor, apply thread sealant GM P/N 12346004, (Canadian P/N 1093480), or equivalent. Notice: Refer to Fastener Notice in Service Precautions.
  2. Use to install the J41712 oil pressure sensor to the engine block. Tighten the engine oil pressure sensor to 35 Nm (26 ft. lbs.) .Connect the oil pressure sensor electrical connector (1).

Posted on Oct 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of the knock senser on the Pontiac G6 2006 2.4liter


The sensor is located on the front of the engine, under the intake manifold to the right. It's to the left of the oil filter housing above the starter. The electrical connector is clipped to the oil dipstick tube.

Oct 06, 2014 | 2006 Pontiac G6

1 Answer

How do you know when your on TDC on a 2004 Pontiac GTO?


If you have only replaced the heads you shouldn't have to worry about TDC unless your replacing the cam but to answer the TDC question put you pushrods in the #1 put finger on the spark plug hole turn engine till air comes out the hole and both pushrods are all the way down this is your compression stroke

Jun 16, 2014 | 2004 Pontiac GTO

1 Answer

I need to know how to remove Freon from a 06 GTO.


You can't do it yourself. It is illegal to vent Freon into the air. you have an 06 GTO that should have R134 in it. That can be vented by locating the high or low pressure fitting on the line coming from the A/C compressor and, using a tool, pressing the plunger on the fitting.

Aug 18, 2013 | 2006 Pontiac GTO

1 Answer

Show a diagram of fuse box in 2004 Pontiac GTO


On this website you find fuse box diagram and description for Pontiac GTO (2004)


Pontiac GTO 2004 2006 fuse box diagram Auto Genius

Oct 21, 2012 | 2004 Pontiac GTO

2 Answers

How do i adjust my headlights on my gto


Headlight adjustment requires specialized tools.

Jun 08, 2012 | 2004 Pontiac GTO

1 Answer

How to change the oil pan gasket on the 2006 pontiac gto?


this is a pretty labor intensive job that shouldn't be started without a brand specific repair manual.

Feb 25, 2011 | 2006 Pontiac GTO

1 Answer

Capacity for cooling system for 2006 Pontiac GTO


Cooling System Capacity: aproximately 14.3 litres ( US gallons 3.78)

Dec 31, 2010 | 2006 Pontiac GTO

1 Answer

CHANGING OIL ON 2006 GTO, WHAT TORQUE SHOULD THE OIL PLUG BE TORQUES TO


Hello and welcome. here is the oil drain plug torque spec for your vehicle

Oil Pan Drain Plug
25 N·m
18 lb ft

Oct 08, 2010 | 2006 Pontiac GTO

1 Answer

2006 Pontiac GTO hood release cable not working correctly need 2 people to open hood. garage says it is because after market radiator fitted??


The cable housing has to be locked in place at the beginning and the end destination. If either one is loose the cable won't pull

Aug 27, 2010 | 2006 Pontiac GTO

2 Answers

2004 Pontiac GTO 2004


You will need what is called an oil vacuum pump. They are not very expensive (around $20-$30 US) & are usually available at your local auto parts outlet. They are basically an oversized syringe with a flexible rubber or plastic tube instead of a solid steel probe & will usually hold about a metric litre. Hand operated. Use this to withdraw as much oil as you can from the Diff, it is impossible to get every drop. You will also find it handy to refill the diff, but flush it out first with kero or diesel. I also recommend draining all you can in one step, then waiting 1/2 an hour to 45mins and doing it again to get the last bit.

Dec 07, 2009 | 2004 Pontiac GTO

Not finding what you are looking for?
2006 Pontiac GTO Logo

602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...