Question about 1998 Plymouth Voyager

1 Answer

My blower is only blowing cold air . I changed my thermostat ,and checked lines that are going in and out heating core .Lines had fluid flowing probably through both in and out.Is there a relay controling the damper for the heater or is ther any thing else i can to to figure this out

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 270 Answers

The "damper" is controlled by vacuum. Look for a broken, cracked or dislodged vacuum hose.

Posted on Oct 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

No heat blowing cold air.


Do you smell coolant inside of the vehicle. If so then chances are your heater core is going.

Nov 23, 2013 | 1997 Ford Contour

3 Answers

My heat in my jeep just stopped working


need to make sure you have enough coolant and if it does then it could be your thermostate or clogged heater core

Feb 17, 2013 | 2007 Jeep Wrangler Unlimited Rubicon 2...

2 Answers

No heat


Check to see if this is working.

Jan 13, 2013 | 2004 Ford Freestar

2 Answers

2003 f350 diesel no heat


thermostat is sticking open

Dec 25, 2012 | Ford F-350 Cars & Trucks

3 Answers

Heater blows cold


To troubleshoot this types of problem,click the link below :----http://howtobyme.blogspot.in/2012/02/heater-blows-only-from-defrost.html
--------Go through the procedure to confirm the issue.------
Engine Overheats and heater blowing cold? http://howtobyme.blogspot.com/2011/11/engine-overheats-and-heater-blowing.html
---------Heat blows cold on drivers side and hot on passenger side? http://schematicsdiagram.blogspot.com/2011/12/heat-blows-cold-on-drivers-side-and-hot.html
-----------
This will help.Thanks.

Feb 15, 2012 | 2003 Buick LeSabre

2 Answers

Cannot get the heater to work


CHECK SEE IF HEATER BLOWER MOTOR WORKING, REMOVE HEATER BLOWER MOTOR HOT WIRE HEATER BLOWER MOTOR SEE IF BLOWER MOTOR WORKING BLOWER MOTOR FAULTY OR YOU HAVE FAULTY WIRING AT BLOWER MOTOR AND RESISTOR.

Nov 05, 2011 | 1996 Mercury Grand Marquis

2 Answers

My heater is blowing out cold air, i changed the thermistate and had it if flused out. The hot water from the heater core is going in but not coming back out.


Yeah you probley have air in the coolent system try letting it run untill the temp is about 195 degrees and then cut it off lwt the water **** down and out mor in and do it over untill you got heat

Jan 09, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

Heat not working on 98 gmc jimmy. Replaced thermostat, checked fluids. Blows air but no heat. Have automatic temp controls and when put on auto nothing at all comes through vents but if put back to manual...


Flushing the heater core is fairly easy just remove the 2 hoses going to the heater core and use a different hose if you have to and use a garden hose to backflush the blockage out..this may take as much as 5-6 times also check for vacumn lines missing or disconnected or breaks pinched ect... some where in the vicinity of the passenger side under hood by the a/c lines ect. good luck hope this helps

Dec 06, 2009 | 1998 GMC Jimmy

1 Answer

The heat in my 1992 Jeep Wangler is not working.


The only reason it won't blow hot air is because the water is not getting to the heater core. Check to see if you have a heater control valve in one of the two lines to the heater core. If so check to be sure that is is opening and closing. If it won't open then you get no water flow in to the heater core.

Feb 04, 2009 | 1998 Ford F150 Regular Cab

3 Answers

My heat in my truck doesnt work


the blendoor on the heater box maybe broken ck lines going to heater core and make sure they are hot. does the heat temp change at all from cold to hot?

Dec 05, 2008 | 2001 Ford Expedition

Not finding what you are looking for?
1998 Plymouth Voyager Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...