Question about 2004 Ford F150

1 Answer

How to get the front drive shaft past the sway

How to get the front drive shaft past the sway bar on an 04 f150

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

It comes out without lowering the sway bar
you unbolt both ends of the shaft and pull the front part out past the front diff towards the front of the engine and the rear part of the shaft will just fall out if you cant figure it out
just remove the 4 15mm bolts that hold the sway bar to the frame and it will lower enough that will get it out no problem at all

Posted on Jan 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Did Ford make F150 XLT 2wd with no sway bars in 1995? I purchased one and there is no sway bar in front end.


My research tells me that yes, they did come with sway bars. There should be two mounting holes on that axle. The sway bar comes in a curved model that fits 1995's. You probably already figured this out but I thought I'd help!

Nov 27, 2016 | Ford F-150 Cars & Trucks

2 Answers

Rattle while driving front and rear


Check the drive shaft universal joints. Also possibly an alignment problem.

Dec 16, 2014 | 2002 Nissan Altima

1 Answer

How hard is it to replace the front sway bar bushings on my 04 camry se


Here are general instructions for replacing this part.
Instructions
    • 1Park the vehicle on a paved level surface. Apply the parking brake and release the hood latch. Place a wheel chock behind of the rear tires and open the hood of the vehicle. This will help to allow some light down into the engine compartment for you when you're underneath it.
    • 2Lift the left front quarter of the vehicle with the floor jack and place a jack stand in a safe and secure location. A front frame rail would be ideal if applicable. Repeat this step for the right front quarter to elevate the front axle.
    • 3. Put on the safety glasses, grab the tools, replacement bushings, and creeper and crawl under the front of the vehicle.
    • 4Locate the sway bar bushings by following the sway bar from the links behind the front tire(s) to where it is mounted to the undercarriage of the car by a bracket. In some vehicles, it may be necessary to remove heat shield, brackets or other components to obtain access to the sway bar brackets for removal. If this is the case, remove anything to help you gain access. The brackets are mounted by one or two bolts. Sometimes the bolt may be steadied with a nut or sometimes it may be screwed into a fixed threaded hole in the undercarriage. Remove the bolts using the ratchet, socket and hand wrench if necessary. One bolt sway bar brackets will have a hinged top or bottom that you'd swing away once the single bolt was extracted.
    • 5Slide the old bushing along the sway bar to a location that's easy for you to extract it from the sway bar. Pry the slotted opening of the bushing using the pry bar to convince it off of the sway bar. The bushing are generally a rubber coated steel bushing so they're going to come off stubbornly. Place the new bushing onto the sway bar in the same fashion. Since they're new, they're going to be even more stubborn than the old one(s).
    • 6Position the bushing back in the correct location on the sway bar and replace the brackets. Tighten with the ratchet, socket and hand wrench as necessary.
    • 7Replace any components that you may have had to remove. Collect all the tools and debris from under the vehicle and crawl out. Lower the vehicle, close the hood, and remove the wheel chock.

Sep 18, 2012 | 2004 Toyota Camry

1 Answer

Solid bar in front end, two bushings on either side of front tires is this the sway bar?


if you are talking about the sway bar end links. you can replace them yourself to save a few bucks. first Raise the front of the vehicle with a hydraulic jack. Place jack stands under the frame on each side of the vehicle. Lower the hydraulic jack so that the weight of the vehicle is supported by the jack stands and the front wheels are off the ground. locate the sway bar end links on either side of the front sway bar. Remove the bolts from each end of the sway bar end link. replace the bushings in the same order you take them off. you can go to any auto parts store and buy end links for your car.

May 04, 2012 | 2001 Chrysler PT Cruiser

2 Answers

Front End Knock


Check the sway bar links and ball joints.

May 04, 2009 | 2001 Ford Escape

3 Answers

Knock on left front suspension over bumps and rough roads


Have the sway-bar end-links replaced. They will thunk and rattle over washboard or severe bumps, but will not when wheels are turned and sway-bar is loaded.Fairly cheap and easy repair, no alignment needed.

Mar 24, 2009 | 2001 Volvo S60

1 Answer

Front Left Sway Bar Link


The front stabilizer shaft (sometimes called a sway bar) is mounted to the top rear of the frame and to the lower control arm. The shaft is attached to the frame with clamps and rubber insulators and to the control arms with insulator links.

Try http://www.autozone.com/shopping/repairGuide.htm

Jul 08, 2008 | 2004 Pontiac Grand Prix

Not finding what you are looking for?
2004 Ford F150 Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...