Question about 1998 Chevrolet Blazer

1 Answer

How to install a fan blade on a 1998 Chevy Blazer? Shallow side towards the engine or towards the clutch?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 372 Answers

The curve in the fin ends towards the engine.

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace water pump


Drain engine cooling system
Remove upper fan shroud
Remove fan clutch and blade assembly
Remove serpentine belt
Remove bolts and water pump
Reverse procedure to install

May 29, 2012 | 2000 Chevrolet Blazer

1 Answer

I have a 1987 chevy s10 blazer. i replaced my clutch about 6months ago and its gone again. i can use it in 1st & 2nd but i have to bump while in one those gears to crank do i replace the clutch or...


it sounds like you installed clutch disc backwards its about the right time frame-- the raised side of disc should face the pressure plate or towards transmission good luck

Jun 25, 2011 | 1987 Chevrolet Blazer

1 Answer

1996 Blazer: How do install a 1996 chevy blazer serpentine belt...


It will have a diagram right above the fan blades to show you how it needs to be ran. Just need to release some pressure off the belt tensioner to make it all fit

May 16, 2010 | 1996 Chevrolet Blazer

1 Answer

How to replace the water pump on a 1998 dodge durango


what size engine? do you mean fan blade? all of them facing vehicle will be remove turning wrench to the left side or to the right side of vehicle but you must hold pump pulley with spacial tool and turning big fan blade clutch nut to the left facing the vehicle of course

Nov 19, 2009 | 1998 Dodge Durango

2 Answers

I am trying to remove the bolt for the fan clutch assembly on a 97 chevy blazer.


  1. 1 Remove the fan and clutch assembly from the fan's pulley. The assembly attaches to the pulley with several bolts on the circumference of the pulley. To remove the bolts, position an open-end wrench over each bolt and turn each bolt in a counterclockwise direction while grasping one of the fan's blades to prevent the fan from turning with the bolt.
  2. Step 2 Pull the fan and clutch assembly away from the engine, then lift the assembly out of the engine's compartment.
  3. Step 3 Remove the bolts which hold the fan to the clutch. The bolts are located on the back of the fan, and can be removed with a open-end wrench.
  4. Step 4 Place the fan and clutch assembly on a flat surface with the clutch facing up, then pull the clutch straight up to disengage it from the fan.

Nov 12, 2009 | 1997 Chevrolet Blazer

3 Answers

Can't find the oil filter on 1998 chevy blazer


there is a black cover right under the front of the blazer tha says oil filter acess

Mar 21, 2009 | 1998 Chevrolet Blazer

1 Answer

Cooling Problem With My 97 S10 Blazer


Leave belt on, the fan clutch will loosen in the same direction that the fan turns while engine is running.There is a special wrench for these but, as a help to loosen it, with a heavy hammer and long chisel, place chisel blade near top of nut flat and strike firmly till it loosens in the direction the fan turns. This method is really not recommended as it is a shock load the water pump is not made for.Use care not to hit strait into shaft center. Before replacing fan blade, what caused fan to hit shroud?? Fix that so it don't happen again!Good luck! Freezing and thawing in Michigan!

Feb 08, 2009 | 1997 Chevrolet Blazer

2 Answers

04 trail blazer


there is a big nut that is part of the fan clutch that unscrews from the water pump .I use a long punch to break it loose then a big adjustible wrench.

Aug 25, 2008 | 2004 Chevrolet TrailBlazer

2 Answers

Fan clutch removal


crank the engine and see wich way the fan turns and that's the way to loose it if turns to rt it looses to rt if to the left it looses to the left

May 24, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...