Question about 1994 Chevrolet S-10 Blazer

1 Answer

I have a 1994 chevrolet blazer and we are having problems putting the ignition switch back in position can you help with this problem?

Posted by on

  • marysgastoni Oct 04, 2009

    Yes I am talking about the switch under the base colunm where the ingition switch rest on the steering wheel colunm. need to know how to line it up so that it will crank.

  • Joseph Howard May 11, 2010

    Are you talking about the lock cylinder part that the key goes in? Or the switch under the dash at the base or the column?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Make sure you have the key in place with the switch on acc.

Posted on Oct 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was given a 1994 s10 Chevy Tahoe vortex blazer


I was given a 1994 s10 Chevy Tahoe vortex blazer??????? It's either a S-10 pick-up or it's a Tahoe or a Blazer not all three . So which is it ?

Mar 11, 2017 | 1994 Chevrolet S-10 Blazer

2 Answers

Trying to locate the ignition module for chevy blazer s10 1994


Ignition module sits in the ignition distributor, remove distributor cap, there will be two elec. harness plugs, the one with two wire's is for the pick up coil, the other one is for the ignition module, just unscrew module out of distributor and install new one.

Sep 23, 2010 | 1994 Chevrolet S-10 Blazer

2 Answers

1994 s10 blazer no spark


Sounds like the ignition module. Do you know if it is tbi or cpi?

Mar 28, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

I put in a new starter and I am not getting any response with the ignition switch


the red cable might be loose or you can manually started by geting cable to run to the positive side on the starter

Nov 05, 2009 | 1994 Chevrolet S-10 Blazer

2 Answers

Ignition switch


You may not have to replace the switch. Try looking around the base of the steering column. You may have to remove the knee pad in order to get a better look. The ignition switch is located at the base and is anchored by two 5/16 self thread screws. Sometimes over an elongated period of time the switch can slide down out of position. Look for the original marks left by the screws and return the switch to that position. If this fails to solve your issue, than it will be necessary to change the switch. It's worth a try. Thank you, Dana

Sep 21, 2009 | 1999 Chevrolet Blazer

1 Answer

Chevrolet blazer 2004 car do not crank when ignition is turn. {speedometer} is stuck on 50/60 . when ignition is turn it jump up and down .


The problem is caused from a grounding problem. You need to look around your car for a ground wire that has come undone or hasnt been put back on (normaly black). If it happens when you crank check for ground problems around the starter and around the ignition coil and ignition switch. Has anyone done any work lately? If so look for a ground wire off where they were working.
Hope this helps

May 06, 2009 | 2004 Chevrolet Blazer

1 Answer

Car won't turn over, where is the ignition switch located on a 1994 s10 blazer,battery is good.when you turn the key nothing happens.is there a safty switch somewhere in steering column?


youve got to remove the steering wheel, take the locking mecanism off, then the mecanism for the signal lights off....whitch should only have a few screws.....then where the ignition switch is.....you should see a screw that looks like it goes through the switch..remove that then give the ignition switch a tug or two and it should come out 

Mar 06, 2009 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...