Question about 1991 Mercury Tracer

2 Answers

Parking brake not holding

Adjusted the parking brake so that there is now tension on the lever but the parking break still won't hold the car on a hill.

Problem with the rear brake drums?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Master
  • 302 Answers

It sounds like its time to replace ur rear brakes, but dont forget to readjust handbrake when done

Posted on Oct 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

Have you checked your rear brakes it sounds like there worn and needs to be replaced.

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove and clean and replace the rear brakes on a 2008Toyota yaris


REMOVING REAR BRAKE DRUM SUB-ASSEMBLY
1. Release the parking brake and remove the rear
brake drum.
If the rear brake drum cannot be removed easily,
do the following:-
2.Remove the hole rubber and insert a screwdriver
through the hole into the backing plate, and hold the
automatic adjust lever away from the adjuster.
3.Using another screwdriver, contract the brake shoe
by turning the adjuster.
4. Take out the brake drum from the flange.
5. remove the shoe hold down spring cup, shoe hold down spring, pin and front side brake shoe.
6. Remove the tension spring. Remove the shoe return spring from the rear brake shoe and remove the parking brake shoe strut set.
7. Remove the shoe holding spring cup, shoe hold spring, pin and rear brake shoe.
8. separate the parking brake cable.
9. Remove the automatic adjust lever tension spring and remove the automatic adjust lever.
10. remove the C-washer and remove the parking brake shoe lever.
NOTE: Do not use any solvent like gasoline to wash the brake parts.
Always wear safety goggles and mask before using compressed air.



Dec 28, 2013 | Cars & Trucks

1 Answer

Parking brake won't hold even after shoes adjusted


What type of rear brakes do you have?Disc or drum.

Dec 20, 2012 | 2007 Dodge Charger SE

1 Answer

Replaced all back brakes and parking brake pads parking break will not hold help


check parking brake cable and lever,make sure it's holding.











TIM.........

Oct 24, 2010 | 2001 Ford Explorer Sport

2 Answers

Parking brake on my 01 kia rio(standard) no longer holds


parking brakes are adjusted at and with the rear brakes,..(drum brakes that is),.....as you adjust the rear brakes to have a slight drag as you spin tire, the parking brake is adjusted at the same time,...they work together with that one adjuster,....as you pull on the parking brake, it makes the brake shoes spread apart just as they do when you push the brake peddle,..by adjusting the rears you'll also find that the brake peddle feels better too.

Jan 06, 2010 | 2001 Kia Rio

1 Answer

'96 Jeep Grand Cherokee parking break doesn't work


check the rear brakes. Possible they are out of adjustment or worn shoes.

Nov 13, 2009 | 1996 Jeep Grand Cherokee

1 Answer

I need to adjust my parking brake on my 2003 Expedition. It does not hold as tightly as it use to. Is this something that can be easily adjusted?


there should be an adjusting screw around the lever that is used to apply the parking brake. if you tighten this until there is a slight drag in the back tires and then back off two full turns then that will adjust the parking brake.

Jun 25, 2009 | 2003 Ford Expedition

1 Answer

I need a schematic for the rear brakes on an F150 super cab with 4.6L automatic trans 4wheel drive


Drum, Rear Brake System Standard Rear Brake
9969082.gif
Item Part Number Description 1 2069 Brake Shoe Hold-Down Spring Pin 2 — Rear Wheel Cylinder Retaining Bolt (2 Req'd) 3 — Washer (2 Req'd) 4 — Anchor Pin (Part of 2211) 5 — Wheel Cylinder 6 2028 Brake Shoe Anchor Pin Guide Plate 7 2A637 Parking Brake Lever 8 2296 Brake Shoe Retracting Spring (Short) 9 2296 Brake Shoe Retracting Spring (Long) 10 2200 Rear Brake Shoe and Lining (Secondary) 11 — Washer 12 2106 Parking Brake Lever Pin Retainer 13 — Brake Shoe Adjusting Lever Cable Guide 14 2A642 Primary Brake Shoe Parking Brake Lever Link 15 2A601 Parking Brake Link Spring 16 2068 Brake Shoe Hold-Down Spring 17 2A176 Brake Shoe Adjusting Lever 18 2048 Brake Shoe Adjusting Screw Socket 19 2047 Brake Shoe Adjusting Screw Nut 20 2041 Brake Adjusting Screw 21 2049 Brake Shoe Adjusting Screw Spring 22 2200 Rear Brake Shoe and Lining (Primary) 23 2A178 Brake Shoe Adjusting Lever Cable 24 2211 Brake Backing Plate
Heavy Duty Rear Brake
6dcb5d2.gif
Item Part Number Description 1 — Rear Wheel Cylinder Retaining Bolt 2 00538 Lock Nut 3 2212 Rear Brake Backing Plate 4 2262 Rear Wheel Cylinder 5 2A642 Primary Brake Shoe Parking Brake Lever Link 6 2A601 Parking Brake Link Spring 7 2A637 Parking Brake Lever 8 2106 Parking Brake Lever Pin Retainer 9 — Parking Brake Lever Bolt 10 — Secondary Shoe Assembly 11 2A179 Brake Shoe Adjusting Lever Cable Guide 12 2068 Brake Shoe Hold-Down Spring 13 — Adjusting Lever Pin 14 — Adjusting Lever Return Spring 15 2A176 Brake Shoe Adjusting Lever 16 2047 Brake Shoe Adjusting Screw Nut 17 2049 Brake Shoe Adjusting Screw Spring 18 2041 Brake Adjuster Screw 19 — Primary Shoe Assembly 20 2068 Brake Shoe Hold-Down Spring 21 2200 Rear Brake Shoe and Lining 22 2035 Brake Shoe Retracting Spring 23 2A178 Brake Shoe Adjusting Lever Cable 24 2092 Brake Adjusting Hole Cover 25 2069 Brake Shoe Hold-Down Spring Pin
The rear drum brakes:
  • Have internal shoes that expand against the brake drum (1126).
  • Are a single-anchor type.
  • Are actuated by one rear wheel cylinder (2262).
  • Have two pistons in the rear wheel cylinder (2261). One exerts force against the upper end of the primary shoe; the other exerts force against the upper end of the secondary shoe.
  • Adjust rear brake shoes and linings (2200) automatically.
  • Need manual brake adjustment if the adjusters are not operating properly or after the rear brake shoes and linings have been replaced.
When the brake pedal is applied, hydraulic fluid pressure forces the pistons in the rear wheel cylinder outward, moving the rear brake shoes and linings against the brake drum.
The rear drum brake system includes the parking brake mechanism. Refer to Section 206-05 .

Apr 04, 2009 | 1997 Ford F150 Regular Cab

2 Answers

Parking brake adjustment


On the accents what you need to do is to remove the plastic casing from around the parking brake mechanism. Towards the back on each side there is a screw that needs to come out. Then you will just need to wiggle the plastic casing out and around from the parking brake and set it aside with the screws. Once that is off on the inside there will be what looks like one long (gold colored) screw and at the bottom there will be a mini cable running off to each side. At the end of the tension adjuster is where you adjust it. Mine was very loose and I had to tighten it down quite a bit. It takes a 12 MM wrench. You will want to turn the wrench toward the passenger side to tighten it down. Hope this works for you.

Feb 24, 2009 | 2001 Hyundai Accent

2 Answers

Handbrake does not always work at first attempt. if you pull the handbrake up and down a few times without the button pressed eventually it catches on the ratchet and works.


Check the return spring on the parking brake lever as wll as the gear teeth:
  1. Make sure the parking brake cable is free and is not frozen or sticking. Make sure the brake shoes are properly adjusted.
  2. Raise and safely support the rear wheels.
  3. Apply the parking brake while counting the number of notches. Check the desired parking brake stroke; it should be 7-9 notches.
  4. If adjustment is required, remove the adjusting nut cover and turn the adjusting nut located at the front of the parking brake cable.
  5. After adjustment, check there is no looseness between the adjusting nut and the parking brake lever, then tighten the locknut.
Do not adjust the parking brake too tight. If the number of notches is less than specification, the cable has been pulled too much and the automatic adjuster will fail or the brakes will drag.
  1. With the parking brake lever in the released position, turn the rear wheels to confirm that the rear brakes are not dragging.
  2. Lower the vehicle.
  3. Check that the parking brake holds the vehicle on an incline.

Sep 24, 2008 | Mazda MAZDA6 Cars & Trucks

Not finding what you are looking for?
1991 Mercury Tracer Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...