Question about 1996 Chrysler Town & Country

1 Answer

Looking for a diagram on removing and replacing the neutral safety switch on a 96 chrysler town and country

Posted by on

  • ljksro Oct 03, 2009

    The problem with that is you can not turn it because all that you have to work with is a plastic housing that sticks out of the trans.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,596 Answers


The Neutral Safety Switch function is controlled by the Transaxle Range Sensor (TRS). This Switch is Located ON the Transmission with Plug Facing UP and it is on the Bumper / Driver Side of the Transmission You Simply UNPLUG Electrical Connecter, And then the Unit Screws Out of Transmission Counterclock Wise, Install REVERSE Procedure.
NOTE: Be sure to have a DRAIN PAN Under your Work Area as there May be SOME Fluid Drainage When Switch is Removed, Swap them Fast if Fluid Comes out Fast so as NOT to have to Replace A Bunch of Trans. Fluid.

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Key stuck in ignition of 2009 chrysler town and country


Try to start it in neutral. If it starts then it sounds like a neutral safety switch. If the battery is dead it may not let the key out unless you jump the van.

Mar 01, 2013 | 2009 Chrysler Town and Country

1 Answer

Reverse lights blinking when the vehicle is running


You probaly need a new neutral safety switch,

Oct 03, 2012 | 2001 Chrysler Town & Country

1 Answer

How to replace neutral safety switch


On the 1998 Town and Country, the neutral safety switch is inside the transmission . If you are not of the faint of heart, remove the bottom transmission pan and the lower valve body (do not loose any springs or little shiny steel balls), take the old one out and put the new one in and make sure to put the valve body in. The part costs around $50.00. A reputable shop will do it for less than $300.00.

Mar 26, 2012 | 1998 Chrysler Town & Country

1 Answer

Where is the Neutral Safety Switch located on a 2002 Chrysler Town & Country Van?


is the neutral safety switch locatedn on the same place as on a 2006,vs 2002

Oct 29, 2010 | 1992 Chrysler Town & Country

2 Answers

Where is the neutral safety switch located on 1998 Town & Country


It is built into the valve body of the transmission. It can be replaced, but it should be done by a pro. What are the symtoms that make you ask>

Aug 16, 2009 | 1999 Lincoln Town Car

1 Answer

Describe your 2002 Chrysler Town &


Safety neutral switch o.k.? Tried moving shifter through all gears while holding key in start position?

Aug 03, 2009 | 2002 Chrysler Town & Country

1 Answer

I have a 92 Town & Country Minivan that will not start at all... If you put it in park nothing happens but if you put it in neutral it sounds like it wants to turn over and start but doesn't. I have...


CHANGE THE NEUTRAL SAFETY SWITCH AND THE PROBLEM SHOULD BE SOLVED. THE FIRST SIGN OF THE NEUTRAL SAFETY SWITCH GOING BAD IS NOT STARTING IN PARK. KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK

May 09, 2009 | 1992 Chrysler Town & Country

1 Answer

Need to find the location on 1998 town and country Chrysler van's relay switch


The main relay is located on the frame rail on the front drivers side. You must lift the car up make sure you use jack stands for safety.Look under the car by the corner of the radiator on the frame rail you will see it must remove the two bolts wich are a little tricky to get too and the plug.[GOOD LUCK]

Apr 22, 2009 | 1998 Chrysler Town & Country

Not finding what you are looking for?
1996 Chrysler Town & Country Logo

790 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...