Question about 1996 Dodge Caravan

1 Answer

How do you change outer tierod ends on a 1996 dodge grand caravan

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 185 Answers

Jack vehicle up in front and make sure its secure. remove front wheels. tie rod is bolted thru steering knuckle. remove the cotter pin from tie rod end. remove the nut from tie rod end. use a small ball joint splitter and small sledge to release tie rod end from knuckle. if you dot have splitter a good hard hit with small sledge on steering knuckle where tie rod attaches will usually release it. b careful not to bend backing plate. loosen the lock nut on tie rod and spin old end off. try to install new end as close as possible to same position as old end. you will need a front alignment after replacement.

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change out a Ground wire on a Dodge Van


if the wire is at the battery end and you have enough cable length then you can just change the cable end, just cut off the end trim back the outer sheath and install a new cable end onto the cable and re-attach to the battery. note you will have to reset your radio

May 04, 2014 | 1997 Dodge Grand Caravan

1 Answer

Shuddering on and off when going speeds above 40 mph


did you check your tires then check your tierod ends and let me know what happens

Apr 21, 2014 | 2002 Dodge Grand Caravan

1 Answer

2000 Dodge Grand caravan Inner tie rod end


use a pipe wrench also known as a monkey wrench that will work just make sure there is not a lock screw keeping it from turning some aftermarket inner tierods have alittle allen head screw to keep them from turning

Aug 27, 2012 | 2000 Dodge Grand Caravan

4 Answers

1996 dodge grand caravan transmission will not shift out of 1st gear, speedometer doesn't work either


Mounted on the trany is a speedometer sensor. The vehical will not up-shift it, sensor, is malfunctioning. The vehicles computer doesn't know that it is not going fast enough to change gears.

Dec 08, 2009 | 1996 Dodge Caravan

1 Answer

2003 pontiac grand prix inner tire rod , I need to change the tire rod


first take the outer tierod off of the spindle tthen take the boot loose from the rack and try to break the inner tie rod loose make sure when replacing the inner tierod that you count number of times you turn it wel unscrewing the outer tie rid you will need to get a alinment perform after you replace that tierod.

Nov 12, 2009 | 2003 Pontiac Grand Prix

2 Answers

Tie rod problem 98 Dodge


There is a tool that you can use that will make it easier for you. To get to the tie rod end, remove the wheel and take the outer tie rod end loose from the hub. You will have to use a hammer and hit the socket where the end goes into the hub to free it up. Once you have the tie rod loose from the hub, loosen the nut behind the outer tie rod end. Count the revolutions as you unscrew the outer end off and write te number down so you will know how far to put it back on. This will save your alignment. Now, the end that is still there is your inner tie rod end. You will have to undo the bellows boot to get to the nut. The tool will slide over the end and secure onto the nut. Now you just unscrew this and replace with you new inner tie rod end.
Please remember to rate this fix.

Feb 16, 2009 | 1998 Dodge Grand Caravan

3 Answers

1996 dodge grand caravan


my manual says, 1 close doors, 2 place key in ignition & turn key between off and on position for a total of 4 times ending in the off position (do not start engine), 3 press driver side door lock button to lock doors, 4 you will hear chime when programming is completed

Jan 10, 2009 | 1996 Dodge Caravan

Not finding what you are looking for?
1996 Dodge Caravan Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...