Question about 1999 Buick Park Avenue

1 Answer

Window controls are inopeative - 1999 Buick Park Avenue

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 316 Answers

Start with checking your fuses.

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

For the 2007 Ford Freestyle Limited with is the fuse that control power windows


Symptom Chart Condition Possible Sources Action
  • No communication with the smart junction box (SJB) module
  • Circuitry
  • Smart junction box (SJB)
  • REFER to Section 418-00 .
  • All power windows are inoperative
  • Circuitry
  • Window control switch
  • Circuit breaker
  • Smart junction box (SJB)
  • Delayed accessory relay
  • Go To Pinpoint Test A .

Nov 27, 2015 | Ford Cars & Trucks

1 Answer

Need to know how to fix the windows in the stereo in my 1996 Lincoln Continental.all the fuses are fine, I don't know what to do next


None of the windows work ? You say fuses are good , which fuses ? Did you pull them all out an look at them ? Did you check for power - battery voltage at the window switches ? There is a driver door module involved !
  • Power Windows Completely Inoperative
  • Supply open or shorted.
  • Ground open.
  • Window regulator control switch inoperative.
  • Circuits open or shorted.
  • Window regulator electric drive inoperative.
  • Driver door module.
  • PERFORM driver door module self test. Service DTCs. If no DTCs are retrieved, GO to Pinpoint Test C .
If you don't know electrical circuit testing suggest you take to a AES certified repair shop ! If you plan to do this anyway your going to need a wiring diagram , wiring harness layout , volt ohm meter !
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts

Jun 14, 2015 | 1996 Lincoln Continental

1 Answer

Which Relay/Fuse controls the power windows?


Did you check for battery voltage at the switch , with a volt meter before you replaced the main driver door switch ? Maybe you'll want to take this to pro ,instead of just replacing parts !
Symptom Chart Condition Possible Sources Action
  • No communication with the smart junction box (SJB)
  • Circuitry
  • SJB
  • REFER to Section 419-10 .
  • A single power window is inoperative - driver front power window is inoperative/does not operate correctly
  • Power window motor regulator and motor
  • Circuitry
  • Window control switch
  • Smart junction box (SJB)
  • Go To Pinpoint Test A .
  • A single power window is inoperative - passenger front, left rear or right rear
  • Power window motor regulator and motor
  • Circuitry
  • Window control switch
  • Go To Pinpoint Test B .
  • All power windows are inoperative
  • Smart junction box (SJB) fuse 30 (10A)
  • SJB circuit breaker 10 (30A)
  • Circuitry
  • Delayed accessory relay
  • Battery saver relay
  • Driver window control switch
  • SJB
  • Go To
PINPOINT TEST C: ALL POWER WINDOWS ARE INOPERATIVE Test Step Result / Action to Take C1 CHECK FOR CORRECT OPERATION OF THE INTERIOR LIGHTS
  • Turn on the interior lights.
  • Do the interior lights operate normally?
Yes
GO to C2 .

No
To continue diagnosis, REFER to Section 417-02 . C2 CHECK CIRCUIT 400 (LB/BK) FOR VOLTAGE TO THE DRIVER WINDOW CONTROL SWITCH
  • Disconnect: Driver Window Control Switch C504b.
  • Key in ON position.
  • Measure the voltage between the driver window control switch C504b pin 4, circuit 400 (LB/BK), harness side and ground.
    >
  • Is the voltage greater than 10 volts?
Yes
GO to C4 .

No
GO to C3 . C3 CHECK CIRCUIT 400 (LB/BK) FOR AN OPEN OR SHORT TO GROUND
  • Key in OFF position.
  • Disconnect: SJB C2280c.
  • Measure the resistance between the driver window control switch C504b pin 4, circuit 400 (LB/BK), harness side and the SJB C2280c pin 17, circuit 400 (LB/BK), harness side; and between the driver window control switch C504b pin 4, circuit 400 (LB/BK), harness side and ground.
    >
  • Is the resistance less than 5 ohms between the driver window control switch and the SJB; and greater than 10,000 ohms between the driver window control switch and ground?
Yes
Go To Pinpoint Test H

No
REPAIR the circuit. TEST the system for normal operation.

Mar 24, 2015 | 2004 Mercury Sable

1 Answer

Fix wireing thru door boot 2004 jeep cherikee controlls windows locks


04 GC.
dead electric windows. all or just one???????

did you read the pages on this in the FSM?
or
at
alldata.com. its there, tests and the schematic.

working blind, and no docs is , near impossible.

Sep 04, 2014 | Jeep Grand Cherokee Cars & Trucks

1 Answer

99 corolla passenger window wont roll up


Turn the ignition on but don't start the engine. Operate the windows from the master control switch. If none of the windows work, check the main fuse or breaker for the whole power window circuit. If only one of the windows is inoperative, go to Step 3.

  • 2 Check the main circuit relay using a test light. If voltage is coming out of the relay, there is an open or short at the wire feeding power to the other switches. If no voltage is coming out of the relay, use the test light to make sure voltage is reaching the relay. If voltage is reaching the relay, replace it. If there is no voltage reaching the relay, there is an open or short at the wire between the relay and the main fuse.
  • 3 Check the circuit fuse or breaker at the inoperative window. If the fuse or breaker is okay, go to the next step. If you can hear a humming sound as you press the switch but the window does not operate, either the motor is bad or its gearbox may have broken teeth. Go to Step 7.
  • 4 Turn the ignition on but don't start the engine. Using a multimeter, check the master control lockout switch for continuity. If there is no continuity, replace the lockout switch. With some vehicle models, problems at the lockout switch can cause both rear windows to fail.
  • 5 Try the switch at the inoperative window and check for continuity using a voltmeter. If there is no continuity, replace the switch.
  • 6 Check for voltage at the switch using a test light. If voltage is not reaching the switch, there is an open or short between the incoming wire and the fuse or breaker for that circuit power window.
  • 7 Take off the trim panel from the inoperative window. Check for voltage at the motor with a test light while pressing the switch. If there is no voltage, there is a short or open at the wire between the switch and the motor. If the circuit is equipped with a relay, test for voltage reaching and coming out the relay. Make sure the relay is working properly. If voltage is reaching the motor, go to the next step.
  • 8 Detach the window from the regulator and inspect the regulator mechanism by moving the window up and down by hand. Make sure nothing restrains the mechanism. Also, inspect the motor gearbox. Replace any parts as necessary.
  • Oct 03, 2011 | 1999 Toyota Corolla

    1 Answer

    Driver's door window/lock control panel is not functioning. Window are stuck open.


    check wiring loom in between door and a pillar as this model tends to break wires here which causes windows to become inop if broken wire found carry out repair of rejoining

    May 07, 2010 | 2004 Jeep Grand Cherokee

    1 Answer

    Can't find the fuse or relay that controls the power winods. All four windows inop and no interior lights as well.


    that is becuase there isn't one, they are controlled by the BCM (body control module)

    Nov 16, 2009 | 1998 Ford Expedition

    1 Answer

    Rear window inoperative


    The tabs connecting the windows to control arms have snapped.

    Jul 12, 2009 | 2002 BMW 5 Series

    1 Answer

    Rear side windows


    This may be just a case of inadvertently hitting the window lock out n th driver door window switch by mistake. Check that first. Here's some background on window operation

    Principles of Operation
    The driver power window regulator motor is controlled directly by the master window/door lock/unlock switch (and its integrated "auto down" module). Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
    The driver power window regulator motor is a reversible motor that is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
    The passenger power window regulator motor is controlled directly by the passenger power window switch and can also be controlled by the master window/door lock/unlock switch. Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
    The passenger power window regulator motor is a reversible motor, which is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
    The power rear quarter glass is also directly controlled by the master window/door lock/unlock switch. The power rear quarter glass power latches also utilize reversible motors. The power rear quarter glass power latches are operated by applying power and ground to the motor leads to open the window, and then reversing polarity on those same leads to close the window.
    Symptom Chart Condition Possible Sources Action
    • All windows are inoperative
    • BJB Fuse:
      • F20.
    • Circuit.
    • Power window relay.
    • Front door power window switch.
    • GO to Pinpoint Test A .
    • Single power window is inoperative
    • Front door power window switch.
    • Front door power window regulator.
    • Circuit.
    • Driver door power window switch.
    • GO to Pinpoint Test B .
    • Vent power window is inoperative — quarter window glass power latch
    • Circuit.
    • Quarter window glass switch.
    • Quarter window glass power latch.
    • GO to Pinpoint Test C .
    • The one touch down feature is inoperative
    • Master window regulator and door lock switch.
    • INSTALL a new master window/door lock/unlock switch. REFER to Switch—Master Window Door Lock/Unlock .
    • The back window will not defrost
    • CJB Fuses:
      • F30 (10A).
      • F32 (20A).
      • F34 (20A).
    • BJB Fuse:
      • F27 (45A)
    • Circuit.
    • Heated back window switch.
    • SEC/timer module.
    • Rear window defrost relay.
    • GO to Pinpoint Test D .
    • The back window defrost will not shut off automatically
    • SEC/timer module.
    • Circuit.
    • Rear window defrost relay.
    • GO to Pinpoint Test E .

    Jan 28, 2009 | 1999 Mercury Villager

    Not finding what you are looking for?
    1999 Buick Park Avenue Logo

    Related Topics:

    34 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8270 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...