Question about 2000 Toyota Celica

1 Answer

2000 Celica Engine Swap

I'm doing an engine swap on my 2000 Celica and I have two questions. (1) Is it necessary for the automatic transmission to come out with the engine? (2) The overdrive does not engage on the doner car and I may want to use this transmission. Where's the solonoid and how should I test it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 34 Answers

You can just pull out the engine alone and leave the transmission. It depends how difficult pulling out the engine. You can also take the transmision with the engine

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interchangeable 2.2L engine


Engine Swap question - 2.2 - SaturnFans.com Forums

www.saturnfans.com > ... > Models > Saturn L-Series > L-Series Tech

May 18, 2012 - 4 posts - ‎2 authors
Engine Swap question - 2.2 L-Series Tech. ... which engine i can use to swap into my 2000 LS1 Saturn (stick but i don't think this maters). Saturn L200 Ecotec interchangeable parts
9 posts
Sep 1, 2013
2002 Vue 2.2 Engine Removal out top or lower out ...
20 posts
Aug 22, 2011
Question: Transmission swap
12 posts
May 25, 2007
S-Series Swap Guide
20 posts
Nov 10, 2006
More results from www.saturnfans.com

need tips on locating a 2.2L saturn engine... - Hot Rod Forum ...


Jan 01, 2016 | Saturn Cars & Trucks

1 Answer

Pontiac sunfire problems


If engine sizes are correct match for each vehicle engine swap wont be a problem u can possibly even drop the unibody of cars and swap depending on engine sizes match just unplug everything 8 bolt lift body pull unibody out get new rubber underneith for body support everything is manageble

Mar 19, 2014 | 1997 Pontiac Sunfire

1 Answer

I have two toyota pickup truck 89 and 94 with 22re engine, I swap the engine the 94 manual transmission is ok but the 89 automatic transmission is not shifting into 3rd gear and the check engine comes


welcome to modern cars, the newer cars have a TCM.
you can just swap a mech, trans for a electronically swifted trans.
I swapped, you meant.
its not clear what you are doing here,.
why are you swapping engines
and are you expecting both cars to run? which makes above line odd.
no?

Feb 13, 2014 | Toyota Pickup Cars & Trucks

1 Answer

98 Mitsubishi lancer Gli just a quick question im looking at a engine swap for my lancer but not to sure what will fix with out to much modding it only got a 1.5 in atm any ideals ??


bought a automatic transmission filter kit to fix the leak. but it's still leaks is there anything else that i can check to see why it's still leaking

Jan 16, 2014 | Cars & Trucks

2 Answers

1984 volvo 244 auto/standard tranny-engine swap?


Totally forget about changing an automatic car to standard. That would be a very parts & labor intensive switch and is out of the question. If you have the same year and size engine this will be an easy swap. Just remove the donor engine leaving the bell housing and transmission in place in the donor car. Remove the engine from your car leaving the bell housing and transmission in place. Bolt the donor engine to your old bell housing and you are all set. Mark all connections as to not get confused. A digital camera will be of help in taking photos of how things are hooked up.

Sep 22, 2009 | 1984 Volvo 240 Series

1 Answer

Engine swap


The 4JX1 used the 4L30-E automatic transmission behind it...I think the 4JA1 has a different centerline measurement on the bellhouseing.. if thats the case an adapter plate would be needed.
It can be done, but it's probably not going to be cost effective,

May 23, 2009 | 1999 Isuzu Rodeo

1 Answer

Dodge ram50 1992 swap 2,4L to 2,6L


Greetings!

Yes, the engine mounts and bell housings are the same.
The swap should be straight forward, however be sure to swap all the vaccum controls and emission system from the 2.6L.

Have fun!
Cheers, Jay

Apr 29, 2009 | 1992 Dodge Power Ram 50

1 Answer

Engine swap with two Ford Escorts.


the engine will fit, u will need all the electronics and all drive train parts as well

Apr 20, 2009 | 2001 Ford Escort ZX2

2 Answers

Swapping transmissions


THE COMPUTER SWAP IS MORE DIFFICULT........

Oct 16, 2008 | 2002 Chevrolet Tracker

2 Answers

1990 Toyota Cressida Engine Swap


I would not even think about trying! If everything is not 'exactly' the same, don't put yourself through this! Frankster016

Aug 14, 2008 | 1990 Toyota Cressida

Not finding what you are looking for?
2000 Toyota Celica Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...