Question about 2000 Ford F150 Flareside SuperCab

1 Answer

Very little heat and very little a/c,but fan woks at all speeds ,antifreze good,thermestat good, controls good.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

If it gets warmer while sitting still and running, and colder when you drive i'd say thethermostat may be stuck open causing the heat not to be very warm. i dont think these two are related if all these things you say are good, are. ac may just be low on freon.

Posted on Oct 03, 2009

  • chesterl35 Oct 07, 2009

    also could be a blend door motor stuck in the middle, not letting it get hot or cold

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fan switch on 2002 Buick rendezvous located at??


Do you have automatic temperature control? If so there is no fan switch (mechanical that is) it is done through a electronic speed control circuit. The dealer can scan the systems control module and it will generate fault codes for any issues it detects in the Heating/Ac system. You may just have a defective blower motor as well but you gave very little information about exactly what is occurring in the fan, no fan only one speed etc. Please add additional info for more precise help. Thanks have a good day.

Mar 28, 2016 | Buick Cars & Trucks

1 Answer

Heat makes a screaming sound - only comes on when on high, air does not come on at all - A little advice and help needed. THANKS


The screaming sound is the blower motor bearing. the fan speed switch controls the grounding side of fan motor once on high it grounds the high speed fan relay. so lower speeds goes through blower motor resistor. this may be burnt out do to bearing is screaming tight to shaft creating a larger ampere draw that burnt it out.

Nov 13, 2013 | 1997 Chevrolet K1500

2 Answers

The electric fan is does not seem to be engaging at low speed causing the engine to overheat when the A/C is on... the engine fan starts and stop irregularly when waiting for the engine to cool down... is...


Hi!!

There should be a fuse/relay box in the engine compartment close to the battery, If your vehicle is equiped with two fans, there should be two relays. There has to be a cooling fan(if equiped with two) that comes in as soon as you turn the A/C on, is your vehicle has one fan, it has two speeds, when the A/C is turned on, the Hi speed kicks in. Sensors in this circuit that are relevant to this function are, Coolant Temp. Sensor, Engine Temp. Sensor.

Check fuses/relays for the cooling fan(s), if OK, check sensors.

Good Luck!! Don't forget to rate this post!!!

Aug 16, 2010 | 2003 Jaguar S-Type

2 Answers

Tempature is getting hot replaced thermestat


air pockets possibly or your fan is not kicking on. look for a bleeder valve for the coolant and bleed the system when its running, or leave the radiator cap off and let it run for a while then top off system.

Jul 14, 2010 | 1998 GMC Jimmy

1 Answer

Heat/ac blower motor works on high. intermittent on other speeds.


Check the blower resistor pack - usually located in the heater air ducting in the blower fan airflow. Check for loose connections and open circuit resistors on the unit.
If speed 4 works always, its unlikely to be the blower motor ground connection.

Aug 10, 2009 | 2004 GMC Canyon

1 Answer

Blower fan only works on high


If it is working at all then the relay and fuse is good and the problem is either the little vacuum hose on the back of the control switch panel or the panel itself.

Feb 01, 2009 | 2001 Chevrolet Silverado

1 Answer

Toyota corolla 92 no heat


if the fan does'nt come on at any speed have the fan checked if fan is good check the switch if on good replace fan switch located inside there is also a regulator under dash behind the glove box if the fuse's,motor & switch are all good this regulator the last comp. in the heater circut or you have a broken wire. hope this is helpful

Jan 12, 2009 | 1992 Toyota Corolla

1 Answer

Heat


please ck water or antifreze level in the cooling system make shure is full of it .,then ck the heater core lines and the valve for on and off positions ck the vaacum lines that control the panels inside the dash board

Dec 22, 2008 | 2000 Volkswagen Passat 4Motion

1 Answer

Air and heat fan switch 99 chev. silverado 3500


Most likely cause is a bad blower motor that is drawing too much current.

May 22, 2017 | 1999 Chevrolet 3500

1 Answer

Buggyslt


maybe the head wasnt torqued right and is allowing the car to overheat

Aug 18, 2008 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
2000 Ford F150 Flareside SuperCab Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...