Question about 1995 Oldsmobile Achieva

1 Answer

Spark plug cover/shroud shorted/fried

Short in the spark plug cover/shroud that fried the plastic and started a fire.
This is the unit over the spark plugs; the one that connects to the boots that cap the spark plugs....what is it called and how much to replace?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 60 Answers

Coil cover call a dealer probably 2-300

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 2009 2.0 dodge caliber only fire on the front two cylinders the first time I start it up and after I cut it off and back on only the back two cylinders fire


Hi anonymous, the link below is a short youtube video on how to replace your coils....If you don't know which coils are faulty just pull a spark plug lead off a spark plug and plug the spark plug lead onto a SPARE spark plug, Now earth it to the CLEAN motor or body (make sure the spark plug is touching metal) Turn the motor over using the ignition, If the spark plug doesn't spark then replace that coil.....CHEERS..
https://www.youtube.com/watch?v=Qs7hw_BjAGA

Mar 27, 2016 | Dodge Cars & Trucks

1 Answer

Spec vin ecu specs


If it turns, then the battery is OK. Either spark plugs are not firing in proper order (wrong firing order), no power to spark plugs, or no fuel because of fuel restrictions (dirty fuel filter). Inspect the air filter to ascertain its not clogged air. If you smell gas, then you saturated the spark plugs, which is why it refuses to run.
Let it sit for half hour to let spark plugs dry. Inspect to ascertain its not dirty spark plugs, which will also prevent engine from running. After ascertaining its proper firing order, spark plugs are clean, and there's power to distributor cap, ascertain there's fuel in fuel lines by squirting half second (short squirt) of starting fluid into air filter. Close the air filter housing to trap flammable starting fluid gas. Turn engine without giving throttle. Let starting fluid be ignited by spark plugs. If it won't start, then spark plugs are not firing to ignite starting fluid gas. If it starts briefly, but won't run when you give throttle, but catches when a 2nd person squirts more starting fluid into air filter just before engine stalls, then its a fuel restriction issue or no fuel in fuel lines.

Nov 29, 2013 | Cars & Trucks

2 Answers

Need to replace sparkplugs on 2002 ford escape


well replace spark plugs is not a hard job,when replacing spark plugs, good time to replace plug wires also.you need to replace one spark plug at a time so you wont mix up firing order. you need a spark socket, torque wrench, 3/8 ratchet wrench, 3/8 short and long extensions,you need a spark plug gap gauge.spark plug gap for 2.0 engine 0.051 the 3.0 engine spark plug gap is 0.052 - 0.056. just follow spark plug wires they will lead you to the spark plugs.warning wait until engine cool down first because removing spark plugs from hot engine could damaged the aluminum heads,use compressed to blow away debris before removing spark plugs keep debris falling into the cylinders.wear safety glasses if you use compress air and use small amount anti seize compound to the spark plug threads.good idea slip a short length rubber hose over the end of spark plug to use as a tool thread it into place.reason i use piece vacuum hose it will grip the spark plug enough to turn it, but will start to slip if the plug begin to cross thread.when installing spark plug, it should turn at least few times if spark plug start tighten before 1/4 turn thread cross threading need to back off start over dont keep turning you will stripped spark plugs threads in the head also damage spark plug threads, so be careful, good luck with job.

Aug 26, 2012 | 2002 Ford Escape

1 Answer

1986 nissan truck v6 it has no spark.I was told the coil was replaced a year ago


Welcome to Fixya

Do a test for spark at the plugs. Remove one of the plug wires from a plug and hold it near grounded metal. (If the plug end has a long insulated shroud, you may have to improvise to get ground close enough to the end of the wire.) Have someone crank the engine while you watch for spark. If you get an 1/8" or so of spark, that should be enough to fire.Check the distributor cap inside for signs of cracks or carbon arc tracks.Also, check to see that the little carbon contact for the center terminal is in place; without that you can have spark but it won't get to any plug wires.It's rare, but a rotor with an internal short or carbon tracks on the surface can kill the spark before it even gets to the cap.

Thank you for using Fixya!

Mar 28, 2011 | 1987 Nissan Pickup

1 Answer

Engine missing wont fire properly, i think its the spark plugs how do i change them ?


CHANGE SPARK PLUGS.YOU NEED SPARK PLUG 3/8 SOCKET.YOU NEED SHORT AND LONG 3/8 EXTENSIONS.YOU NEED SPARK PLUG BOOT PULLER AND A SPARK PLUG GAUGE SET THE SPARK PLUG GAP.NOW CHANGE 1 SPARK PLUG AT A TIME SO YOU MIX THEM UP GET FIRING ORDER MIX UP CAR BACK FIRE WONT CRANK.ALSO CHANGE PLUG WIRES ALSO.

Nov 10, 2010 | 1994 Honda Civic

1 Answer

I removed the plate that covers the top of engine. I found 4 items that look like they are covering the spark plugs. Do these pull off to expose the plugs?


Yes those are the spark plug wires. (short Black plastic). They are attached to the coil housing which covers the coil packs

Jul 10, 2009 | 1995 Pontiac Grand Am

1 Answer

Oil in spark plugs


you mean oil under plug wires? your plugs are in the center of the valve cover? if so, you have a vlave cover leak, the oil will rise and short out the plugs so they will not fire. remove the oil from around the plugs, then replace the valve cover gasket and plugs, try to start again

Apr 02, 2009 | 1994 Lexus GS 300

1 Answer

Spark plugs and wires on a 2002 Kia Spectra


you might see a plastic cosmetic cover over the valve cover area , with like 4 screws holding it down , allen headed screws i think , you will find your wires and plugs under that cover . actually you will find 2 coils with 2 10mm bolts on each coil , each coil has a spark plug boot built on to it for 1 plug and 1 actual spark plug wire to a second plug , very short , unplug the coil connector, unbolt it and pluck it out of the hole , and see your spark plug .

J5

Jan 17, 2009 | 2002 Kia Sportage

3 Answers

I can't get the spark plug wires off. What's the shroud covering


they are a heat sheild they should bolt on with the exaust

Nov 27, 2008 | 1988 Buick LeSabre

3 Answers

89 justy wont start-no spark.


Doesnt the crank sensor use the flywheel for its signal maybe the sensor got damaged during the clutch job

Oct 15, 2008 | 1989 Subaru Justy

Not finding what you are looking for?
1995 Oldsmobile Achieva Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...