Question about 1990 Chrysler Imperial

3 Answers

My dash lights are not working the gauges fuse is

My dash lights are not working the gauges fuse is good ???

Posted by on

  • Anonymous Mar 18, 2014

    car seems to be running fine. Just no lights on dash for speedometer or some other gauges



3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chrysler Master
  • 5,763 Answers

Good be dimmer switch, but only if all dash lights are out,like radio heater control, cig light,if those still work then i would say its bulbs.

Posted on Oct 03, 2009

Testimonial: "HOW MANY BULBS?????????????????"

  • Johnny    Brown
    Johnny Brown Oct 05, 2009

    you would have to pull cluster (gauges) and on the back is the bulbs, Theres 3 or 4,


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Might have burnt out bulbs or the little copper wires that run to each individual light might be broken. Can repair with copper gasket sealant but tape off all areas not affected.

Posted on Dec 30, 2016

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Ok I have a 93 Chrysler imperial the dash lights stopped working the radio stopped working before the dash stopped working my heater control works and so does my
cigarette lighter so what could it be

Posted on May 28, 2015

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do a fix my car the front panel gauges turn off and the fuses open

I may b a fuse in the engine fuse box labeled gauges..check those and all other fuses pertaining to dash lights.. If they are good then it may be your wireing in the dash itself..or plugin wire to the dash may b faulty

Jun 15, 2015 | 1996 Chrysler LHS

1 Answer

Jeep liberty dash lights and gauges not working

if you have checked the fuses and there good-purchase a recycled unit and try that- cheers Denny

Nov 02, 2013 | Cars & Trucks

2 Answers

What causes everything to not work in the dash?

First, you can check the fuse box for a blown fuse that powers the dash lights/gauges. Fuses are labeled and are easy to see if it is good or blown. Blown fuses will be missing the metal arch inside the plastic case. Or look for a disconnected or corroded ground wire, especially if there was ever a water/coolant leak under the dash area and floor. Chasing missing grounds can be expensive.

Oct 23, 2012 | 2000 Ford Windstar

1 Answer

1998 plymouth grand voyager cluster illumination

I would check the dash lights fuse first. If the fuse is good and the circuit has voltage, you may have toasted the dimmer control.

Aug 13, 2012 | 1998 Plymouth Grand Voyager

1 Answer

Dash gauges and Information center work intermittantly - All fuses are in good

is it the lights of the gauges dont light up or the gauges dont work period? if they dont light up then check the bulbs that are behind the gauge cluster and they could be burnt out i have the flickering prob with my ac hvac controls and half the lights on my gauges dont light up due to bulbs being burnt out i just havent spent the money to get some blue leds to put in there

Feb 20, 2012 | 1995 Oldsmobile Aurora

1 Answer


Do you know that all this stuff was working when it was parked? Lets assume it was. Most of this stuff works with the key on or in the acc. position. You are going to need something to check for voltage. At least a test light better yet, multimeter. The dash lights however, come off the headlight switch. Start by checking for power at the fuse for the gauges it's marked "inst" for instruments it protects all the gauges including the tach and speedo. With the key on you should have power on both sides of the fuse. The antenna won't come up until you get the radio to come on. If you have power at the fuse, Your going to have to start taking the dash apart to see where the "open" in the circuit. If you have no power at the fuse, it comes from the ignition switch, it's down low on the steering column. ( I hope you're skinny)

As for the brakes, since it's been sitting that long I would be pulling the wheels off and looking for a seized caliper.

If your going to do your on work on this car I recommend investing in a good manual, try to find a factory book on ebay. or Craig's list.

This is a way cool car, have fun with it!!!

Jan 26, 2011 | 1989 Chevrolet Corvette

1 Answer

Dash lights and gauges not working...

While at the junk yard pick up a used insturment cluster . Cost about $20 bucks .

Jun 09, 2017 | 2000 GMC Jimmy

1 Answer

2000 Toyota Camry instrument panel gauges not working

check the fuses in your manual it will tell you which fuses are for the dash and replace them it sounds to me like they are blown! good luck

Jan 09, 2010 | 2000 Toyota Camry

Not finding what you are looking for?
1990 Chrysler Imperial Logo

567 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides