Question about 2006 Chevrolet Equinox
Take the support bracket that holds battery secure off unloose your cables and twist them while pulling them up. you may need to leave the bracket on then once the cables are loose take the bracket off make sure when you install your new battery that once you put one cable on make sure that the free cable touches nothing metal and also when putting on the last cable try to keep sparking to a minimum.
Posted on Oct 03, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Battery compartment?
The battery is supposed to be non-user servicable - it is on the divers side underneath the hood. There is a black plastic covering that you must remove. It will expose a pin which you use to jump start the car. Around that, you'll see 2 screws in a black plastic shell, remove that, and the battery will be exposed. You can replace the battery there.
Posted on Feb 11, 2009
SOURCE: 2006 Chevy Equinox
Hiya...the factory-installed keyless remote control are installed in most Equinoxes IF SO equipped with this option that year.
However, it's difficult to get "true factory-installed" keyless feature in your Equinox ....but new 2008-2009 Equinoxes built this year now comes with standard keyless remote and yes, new option is remote STARTER feature (that option is identified by a black wire found inside the rear-right quarter window with thin metal line surrounding that interior window to receive signal from remote starter fob)
At least you can find after-market keyless remote control at your local retail store.
Posted on Jan 31, 2009
from the service manual:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Please go to the nearest GM dealer for assistance
Posted on Mar 26, 2009
uasually you have to loosen 2 bolts one for each battery post 2 cables black ground- red positive + and replace them look at your battery to see how its on there first there are mius and positive signs on battery posts
Posted on Jan 24, 2010
Tips for a great answer:
Feb 28, 2015 | 2006 Chevrolet Equinox
Aug 21, 2014 | 2006 Chevrolet Equinox
Sep 07, 2010 | 2006 Chevrolet Equinox
Aug 13, 2010 | 2006 Chevrolet Equinox
Jan 24, 2010 | 2006 Chevrolet Equinox
Sep 26, 2009 | 2006 Chevrolet Equinox
May 22, 2009 | 2006 Chevrolet Equinox
Sep 21, 2008 | 2006 Chevrolet Equinox
Feb 24, 2017 | 2006 Chevrolet Equinox
533 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: