Question about 1992 Pontiac Grand Prix

1 Answer

1992 grand prix turn signals not working

Bulbs and fuses have been replaced. Still no luck. The emergency flashers work.

Posted by on

  • 2 more comments 
  • slorenzon Oct 03, 2009

    I have not tried either of these. Which one should I try first?

  • slorenzon Oct 03, 2009

    I have not tried either of these. Which one should I try first?

  • slorenzon Oct 03, 2009

    I have not tried either of these. Which one should I try first?

  • geaeri95
    geaeri95 May 11, 2010

    did you try the switch or the flasher unit itself?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 5,763 Answers

These cars are common for bad signal light switchs, try lightly moving lever up and down while signal is on,see if it starts working,BUT FRIST MAKE SURE FLASHER IS OKAY. ( there are 2 flashers one for hazard lamps and one for signal lamps.

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My turn signals wont work. i changed the fuses and checked the lights


Change the flasher unit, it's a cylinder type object, either blue or silver in color, usually in the fuse box, just pull it out and push in like a fuse.
The emergency flasher is the same shape, so don't cunfuse that with the turn flasher. To get the right one, turn on the 4 ways, put your finger on both of them, and whichever one you don't feel clicking is the turn signal flasher.

May 08, 2010 | 2003 Pontiac Grand Am

2 Answers

Turn signals and 4-way flashers do not work - 1997 Buick Century


Time to change the flasher unit, it's usually close to the drivers side of vehicle and behind a fuse box access panel and will have something like "12v 23/98W " on it. It's a largish cube shaped componant and may be water damaged !

Apr 10, 2010 | 1997 Buick Century

2 Answers

My turn signals dont work but the emergency flashers work fine.i checked the bulbs they are good .help


they are a serpent system different flashers and fuses and some times element of bulb

Dec 12, 2009 | 1992 Ford Mustang

1 Answer

The turn signals on my grand prix wont work all bulbs and fuses are good .. this all happened after i used the hazards....


the hazard flasher switch and turn signals are all operated by the same flasher unit, there is a factory recall on this problem, call and see if your year and model is under the program before u buy the rather expensive flasher, it is solid state and very common cause of this problem, replace the flasher unit, it is about center of the dash behind the convenience center, the hazard flasher button is part of the unitized flasher.

Dec 04, 2009 | 2001 Pontiac Grand Prix

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

1 Answer

Turn signals and ac stopped working at the same time


don't know if they are related. as for the turn signals check the flasher. there should be 2 of them.one for the turn sinals the other for the emer. flashers

Mar 11, 2009 | 1999 Jeep Grand Cherokee

3 Answers

Blinkers not working


Did you check the bulbs? If one bulb is burned out, the blinkers won't word on that side. You could have one bulb burned out on each side. Start the car, put left signal on. Check front and back lights. Is one light on but not blinking? If that's the case, the light that's not on at all is burned out and has broken the circuit so the good light stays on and won't blink. Check the other side. You also have a 'flasher' , actually 2. One for emergency flashers, one for the turn signals. It could be that the turn signal flasher is shot. You just have to unplug it to remove. It's probably located near the fuses. good luck countrycurt0

Aug 10, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1992 Pontiac Grand Prix Logo

368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...