Question about 1989 Ford Ranger

1 Answer

Get spark, but no power to new fuel pump 1999 ford Ranger

Truck just died in the middle of the road. Put new fuel pump in, but will not work. Fuses good. Get spark. cannot find fuel pump on-off, or reset switch. need truck badly or no work. Folks, any help will be appreciated. thanks!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 127 Answers

The inertia switch is in front of the passenger seat, bolted to the fire wall, hidden by the carpet on an 89 and behind the kick panel on the 99. 99 should have a picture that looks like a gas station pump with a line thru it. pull panel off, push big red button. on 89 its the little grey button on the top.

Posted on Oct 03, 2009

Testimonial: "This contributor is a Wizard! Within 5 minutes of reading his answer, the truck is running! Thank you SO MUCH!!!!! We never would have gotten it. CS"

  • clsamx Dec 11, 2013

    Very happy to have helped. Thanks for the compliment...I am a mom whose son had this trouble. I figured it out with about an hour of Internet research. Hard to believe, huh? LOL

  • clsamx Dec 11, 2013

    How do I delete the above..wrong entry...?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why isnt my1993 ford ranger no spark no fuel


did you back into anything or did anything hit truck before this happend if so check your emergancy shut off switch. check it anyway and reset it.

Aug 22, 2014 | 1993 Ford Ranger SuperCab

1 Answer

Got power to fuel pump but it is not working after putting new one on.This is a 2000 ford ranger.


have you checked the fuel shutoff switch that fords have, owners manual should tell you where and how to reset it, also if you have power you could still have a bad fuel pump relay or a bad ground wire to fuel pump, hope this helps you.

Sep 03, 2012 | Ford Ranger Cars & Trucks

1 Answer

2003 ford ranger fuel pump only has 6 volts


check your earth connections on car and to fuel pump

Oct 29, 2011 | Cars & Trucks

1 Answer

Truck died going down the road replaced crank sensor coil pack and timing chain spark is red not a blue color could it be the ecm truck cranks but wont start


If it is indeed a spark issue. You might have to replace the Ignition Module. On the other hand... check the throttle body to make sure that it is getting fuel... if it's not, you might just need to replace the fuel pump.

Apr 22, 2011 | 2002 Ford Ranger Regular Cab

1 Answer

Engine won't start


camshaft sensor check it

Jun 04, 2009 | 1987 Ford Ranger

1 Answer

No power at fuel pump.


have you checked the fuses??

Apr 27, 2009 | GMC Sierra 1500 Cars & Trucks

2 Answers

My truck 99 ford ranger died while driving down the road


fuel filter usually dont cause it to die and not start back, thay usually cause rough running. see if your fuel pump is running by getting in and roll up all windows so as quite as possible then cycle the key from off to run and lisen for the pump to run for 2 to 3 seconds should be a faint buzz sound if no sound is heard then replace the fuel pump relay, if no help probably going to need fuel pump

Dec 10, 2008 | 1999 Ford Ranger SuperCab

3 Answers

1992 ford ranger 3.0


i was once pulling a trailer with a ranger when it suddenly lost power and the engine died. turns out the problem was with the fuel shut off inertia switch. the switch is supposed to activate in case of accident. on my model the inertia switch is located in the passenger side under the glove box. dont know where yours is located. once you find it, just push the button and see if it resets. good luck.

Sep 13, 2008 | 1992 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...