Question about 2000 Pontiac Grand Am GT

1 Answer

Lowtrac/ABS/check engine come on every now an then. When I restart ligths go off??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 691 Answers

Check the brake fluid reservoir, make sure is never run empty, if it run empty and you refill it, 99% of the time you will have air in the systems and can cause the unit not to operate properly and trigger the lights to come on, next check for leaks on all four calipers make sure no piston boots are not leaking or stuck. if everything look good and no air in the system, get a mechanic who has a scan tool to check for trouble codes and a good multimeter to check that sensor, make sure they in good working order. if all sensor are good, more likely the abs unit may be faulty and need replacing, if you need to replace the unit, shop on ebay or junk yard and get a used unit for cheap.

Posted on Oct 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My xterra some times the abs ligth on i was cleaned the sensor /new brakes/ flushing the oil/ and ligth still onill


First of all have the ABS scanned and check the history for codes that would zero it down to which one it is then check the wire for loose connection or corrosion.

May 13, 2014 | 1998 Volvo V70

1 Answer

Today my scion xd abs ligth and break ligth came on, what could be the problem and how unsafe can it be.


Well you can drive without ABS the brake light came on because the ABS. I would have it serviced they might tell you the ABS unit is bad you don't need ABS they just prevent your tires from locking up during heavy break use

Jan 30, 2011 | 2008 Scion Xd

1 Answer

Service Engine soon light and Service AWD ligths are on, also the abs light


ABS light is on due to a bad or dirty ABS sensor on the front wheel hub. Inspect the front wheel ABS sensor and wire leads on the front wheel inner hub where the speed ring is. At worst it's going to be a bad electronic Actuator at the transfer case or one of the speed sensor at the transfer case, but most likely it's going to be the vacuum switch if you don't have any check engine light on.

I suggest visit autozone or dealer for scanning and know exactly the fault code.

Hope helped.


Mar 26, 2010 | 2000 Oldsmobile Bravada

1 Answer

ABS ligth on caravan 2003


Yes, The light should clear after fix the problem. Check the connection on the sensors. Theres 4, one at each wheel. If you have air in the lines the ABS light will come on. To bleed go left rear, right front, right rear, left front. Don't let the reservoir go dry. Brake fluid should be changed every 30,000 miles

Dec 16, 2009 | 2003 Dodge Caravan

1 Answer

It's possible clear a ABS warning light? The car display a Traction Control Fault problem. How it possible clear or reset this messages???


IF YOU ALREADY HAVE THE ABS FIXED THE LIGTH AUTOMATYCALY TURNS OFF BUT IF THE ABS IS STILL UNABLE THE ABS LIGTH AND THE TRAC OFF LIGTH WILL REMAIN ON

Sep 26, 2009 | 2000 Jaguar S-Type

1 Answer

I have a 93 g20 chevy in a very good shape, last week starts to make a sound (trrr)and turns on the abs ligth, I turns the switch off and on again and it fix the ligth off. could be the abs module, or a...


That sounds like the ABS pump. If you have 4 wheel ABS that pump has a history of problems Leave it alone if its working now. Pump is very expensive.

Mar 01, 2009 | 1993 Chevrolet G20

1 Answer

Abs indicator ligth on


Abs sensor fault, check the ressistance on all 4 abs sensors with disconnected wiring, it should be CA 1 Kohm +/- and volt in AC 1-5mv when turning the wheel, normally just enough with the ohm test.

Jan 08, 2009 | 2001 Saab 9-3

1 Answer

ABS Ligth On constantly on the dashboard .


sounds like a dodgy ABS sensor (change both) but while your there also check the condition of your brake pads

Dec 02, 2008 | 1998 Nissan Maxima

Not finding what you are looking for?
2000 Pontiac Grand Am GT Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...