Question about 2000 Mitsubishi Eclipse

1 Answer

2000 Eclipse manual tran is hard to get into reverse unless you pull forward and then try to shift to reverse but this does not always help. New clutch system installed. Someone said they replace a trans relay/module. Is this correct?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Bad throw out bearing or needs bleeding if its Hydraulic or needs fluid

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New clutch was installed 2003 mitsubishi eclipse v6 it will go into all gears but is always in reverse too even when shifter is in neutral


sounds like your shifter linkage in the trans is out of its gates and in reverse, if you pull off the shifter cover make sure all shift rod in the trans are in the neutral position then reinstal shift cover

Oct 09, 2015 | Mitsubishi Cars & Trucks

1 Answer

97 eclipse


Starting in about the mid 1980's automatic transmissions changed from fluid shifting to electronic shifting. In other words, your shift is by an electronic solenoid controlled by the computer. There is no Shift cable gong to the transmission. Just wires. You need to look for a loose or dirty electronic connection to the transmission.

Mar 30, 2014 | 2001 Mitsubishi Eclipse Spyder

1 Answer

Manual Transmission, wont go into reverse unless the car is off


I've never heard of such a thing in my 40 plus years of driving standard shift vehicles! I suggest that you take it to a reputable mechanic after you check online for 'call back' problems with your model, and after you've spoken to the Mitsubishi dealership mechanics.

Jun 03, 2013 | 2001 Mitsubishi Eclipse GT

1 Answer

My 2000 Jeep Wrangler manual trans. won't shift it into 2nd, 4th, Reverse...


I had the same problem, funny as it sounds but go to jiffy lube, oil rig, or one of those places and have them flush ur trans and have good fluid put in...

Oct 25, 2012 | 2000 Jeep Wrangler

1 Answer

I have a 2005 pacifica, it made a pop noise and wouldnt go forward. now it goes forward an not in reverse. i can also hear the gears shifting, could that be the tran. filter? if so where is it located?


may be a trans filter but the pop noise concerns me to but the trans filter is located under the vehicle and you pull the pan down catch all loose fluid 8 quarts or so and then pull filter off then just put new filter in and new gasket rebolt pan to trans and refill with new fluid also clean the magnent off thats in the bottom of the pan


if i helped please give me good rating thank

May 06, 2011 | Chrysler Pacifica Cars & Trucks

2 Answers

I have a 2003 lincoln ls with 110,000 miles and there is a hard **** when it is about to go into 3rd gear; there is also a hard **** when I put in reverse. I am told that I need a solenoid assembly...


You need a new Trans Control Solenoid--one unit with all 3 pressure control and 4 shift solenoids, in one unit.
Remove trans pan,gasket reusable,remove filter,remove 7 torx screws and one 10mm wire harness connector bolt,then pull down old solenoid pack.

Part # 9L2Z7G391A 515.30 list/332.20 cost at trans supply house

Do Not Go to a Dealer,unless your Warren Buffet or Bill Gates

Change the fluid a couple more times, after installing the new solenoid pack, and driving a couple weeks with no issues. Add a bottle of Red Lubgard, to your Mercon V Trans Fluid, at the last fluid change

Also--pull injector fuses,crank over engine, and flush Power Steering Fluid. (Dex/Merc Fluid)

Oct 14, 2010 | 2002 Lincoln LS

1 Answer

2000 dodge diesel 3500 6 speed manual transmission- having problems shifting in to reverse and ist gear. mutch worse when hot. some times the only way is to shift very quick from 5th for reverse.and 2nd to...


I am going through this now my 2000 ram 3500 always had a problem with reverse

I chocked it up to a quirk of the transmission! But my mechanic found out that they only placed this trans in late 1999 and early 2000 trucks first years the 6 speed was offered. It comes with a smaller clutch and synchronizer that are no longer available unless you find a dealer with old stock sitting on a shelf. I am having to updated my cultch and am having to replace the gears that will allow the new type synchronizer to work this in just a about ½ the price of a new transmission BOHICA/FUBAR

So just get ready for a shock if you need to replace synchronizer rings

Sep 01, 2010 | 2000 Dodge Ram 3500

1 Answer

Only reverse works. No foward gears.


No forward movement in OD or D, but L2, L1 and R work: Forward sprag is broken. R&R. Try not to run or drive the car or further damage could result.

Do you have manual 1st? If so, can you shift through the gears...i.e. manual 1st to manual 2nd then 'D' then 'OD'??? Only 1st and 2nd gears use the forward sprag unless the LO/Rev clutch is engaged...i.e. 1st and 2nd if in "drive". If you can shift threw the gears manually then, yes, your forward sprag broke.

If no manual 1st then your sprag is not what broke. Sounds like you blew up the rear planet. If you pull the pan and find chunks of iron and steel, then that is probably what happened. If you have reverse then it is not the pump. If the pump was bad you would have no line pressure and it would slip in rev. or no rev. Not the beef sun shell either because you have rev., a broken sun shell would cause no 2nd, 4th and rev. gears. Either way the trans needs to come out and torn down and it will be easily found what went. Good luck and thank you for using Fixya.

Mar 06, 2010 | 1991 GMC C1500

1 Answer

Reverse engages HARD!!!


Check for trans codes then I would suggest a fluid change if there are no trouble codes, many times these kinds of problems are caused by a little piece of dirt causing a shift solenoid to stick.

Jul 15, 2008 | 1995 Dodge Caravan

Not finding what you are looking for?
2000 Mitsubishi Eclipse Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...