Question about 1992 Honda Accord

1 Answer

How to fix the serpintin belt - 1992 Honda Accord

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 373 Answers

Replace the belt, dont fix the old one. use a breaker bar to lift up on the belt tension pulley. while holding it up slide off the belt from one of the other pulleys. ***Slowly release the tensioner.*** then remove the belt. replace with a new belt (the same size as the old one) put it on all the pulleys except the last one. lift the tensioner up then slide the belt over the last pulley. recheck all pulleys to see if belt is on all pulleys correctly. then start engine.

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to tighten fan belt on 1999 fairmount ghia v8


The cars today do not have belt adjustments they have what is caller a idler pulls that keeps a serpintine belt "all in one belt" that snakes around all the pulleys,thus the serpintine..name..anyway if it is slipping most likely the belt needs replacing or the idler itself is bad..neither can be adjusted..the fix is replacement...your car should have a belt route under the hood showing where it goes and the idler is spring loaded and easy easy to take the pressure off to take the old belt off and replace it..not a big job for garages if you wish not to DIY .good lucK

Oct 01, 2014 | Cars & Trucks

1 Answer

Hw to put on a serpintine belt on a 2002 crown vic


there is a hole in the tensioner that you can put a ratchet in and take the tension off of the belt ,You can than easily replace the belt

Sep 04, 2014 | 2002 Ford Crown Victoria

1 Answer

Replace serpintine belts on 2002 mazda millenia 2.5l


is it the one belt or does it have the 3 belts

Dec 28, 2012 | 2002 Mazda Millenia

1 Answer

How to remove serpintine belt


Release the belt tensioner and the belt will virtually fall off the pulleys. Make a sketch of the route of the belt before you do that as it can become confusing when you try refit the new belt.

Feb 16, 2011 | Ford Futura Cars & Trucks

1 Answer

Fans don't work after relacing serpintine belt.


look around the wiring and sensors when belt broke some debris may have damaged or disconnected the circuit

Feb 14, 2010 | 1993 Buick Park Avenue

2 Answers

I have a 2000 VW Beetle - the battery light came on this morning will driving to work (5 minute drive) and by the the time I got to work, the power steering wasn't working. Any ideas?


Sounds like the serpintine belt that turns your power steering pump has broken or came off of the pulley.

You should see the problem when you open the hood.

Lone99star

Jan 06, 2010 | 2003 Volkswagen New Beetle Convertible

1 Answer

Need to replace old serpintine belt how do I relieve the tension


On belt tensioner pulley fit a wrench on the bolt that holds pulley, turn clockwise to release tension, hold and remove belt.

Jan 04, 2010 | 2003 Oldsmobile Alero

1 Answer

Serpintine belt making noise/ or belt tensioner


change serpintine belt I had one that it made noise changed belt noise went away

Mar 11, 2009 | 2003 Toyota Matrix

1 Answer

Changing the serpintine belt on a chevy


If the belt was slipping or became contaminated with oil or coolant that should resolve the problem. Check the belt tension first before replacing the belt

Feb 18, 2009 | 2001 Chevrolet Blazer

1 Answer

Serpintine belt


It sounds to me like the belt tensioner pulley is bad.Its spring loaded and this pulley is what keeps the belt in place.

Jun 04, 2008 | 1998 Chrysler Town & Country

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...