Question about 2008 Saab 9-3

1 Answer

I have a 1999 saab 9-3. I am looking to connect trailer lights. Looking for wiring diagram. Thanks, Peter

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Here are a diagram used in South Africa, not sure if it will help you were you are, not that I know though. But this is only if you know which wire does what. If the car has a connecter block, it's quite easy, if you are 2, one in the car controlling the functions, and one testing with a 12V line tester.
Good luck

I have a 1999 saab 9-3. - f503e18.jpg

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do you find the engine numberon a 1999 saab 95 wagon with a 2.3t. the turbo is shot and the parts store needs the engine number to be sure they order have the right one.


Looking from the front of the car, the engine number is on the right side, down low near the gearbox. See the (unfortunately rather unclear) diagram below:
25706289-cdc012op30mhwwuxpkwwrhwn-5-0.gif

May 21, 2015 | 1999 Saab 9-5

1 Answer

Brake light wiring diagram for 2008 Saab 9-3


easy

alldata.com login and read.

or the FSM,

factory service manual, omg, what is a SAAB, a disease?

if i and one , it shoot it. like a sick horse.

Jan 09, 2015 | 2008 Saab 9-3 2.8

2 Answers

All trailer lights work on my travel trailer except there are no brake lights to trailer. The issue I can see is there is no power to the brakes at the 3:00 o'clock and 9:00 o'clock pins on my 2004 g


there will be only 1 power wire for the brake lights as they are connected .together. What you are looking at are the indicator lights (1 left wire and 1 right wire)

Mar 28, 2014 | 2004 GMC Yukon XL

1 Answer

Need a schematic that shows what eachof the colors of wires should be connected to on a 7 blade RV plug in receptacle.


7-Way RV Trailer Connector Wiring Diagramqu363_250.jpg
Click to Enlargequ363_2_250.jpg
Click to Enlarge
Question:
trailer connector wireing diagram. need to know which color wire go to which post.
asked by: Joann

Expert Reply:
When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it.

If you are looking at the inside of the trailer connector where the wires mount to the terminals starting at the notch at the top and working clockwise:

1:00 is Black and 12 volt power
3:00 is Green and Right Turn and Brake
5:00 is Blue and Brake Controller
7:00 is White and Ground
9:00 is Yellow and Left Turn and Brake
11:00 is Brown and Tail and Running Lights
Center is Purple and is Optional Reverse

I recommend using a circuit tester like part # 40376 to verify your connections.

Sep 12, 2013 | 2005 Dodge Ram 2500 Truck

1 Answer

Where is the starter relay located under the dash of saab 93 SE 1999 convertable manual. Car will turn over once but not engage. 2nd attempt nothing. Battery, starter motor and crank shaft good. New...


I'm not sure if the relays are marked by letters and numbers but the relay should be identified by the letter "K". One quick question; on the second attempt do you lose ALL power to everything? If this is the case you may be looking at a bad ground and would check the ground wire for starters at where it connects to the engine block. Wish I had a diagram of the fuse layout and hope it's marked by letters and numbers for you. I hope this helps and good luck.

Aug 02, 2011 | 2009 Saab 9-3

1 Answer

My 2002 saab 9-5 shakes and sputters for about


Water on any electrical part of the engine can cause problems. Even high humidity. The only parts you can easily check and dry out is the plug wires where they connect to the coils and any connections you can find where components are plugged into wiring a harness.

Apr 28, 2010 | 1999 Saab 9-5

1 Answer

Looking at buying a 1999 Saab 9-5 convertible but the top wont go down on it. If I need to replace the motor is this difficult to replace?


It is not an inexpensive problem to repair. Its probably low on fluid wich means it has a leak in one of the top rams or it could also be the drive gear in the pump motor which can be repaired if one is crafty. look in trunk, forward rail 2 holes one for light 1 for fluid level. Con you hear motor running?

Jul 04, 2009 | 1999 Saab 9-5

3 Answers

2003 Saab 9-5 tail lights out. Replaced bulb no


Could be the circuit board on the back of the tailight... check that first

Jun 17, 2009 | 2001 Saab 9-3

1 Answer

Factory 99 dodge trailer plug wiring


You'll need to disconnect the wires from either the truck connector or the trailer connector...
I highly suggest purchasing a voltage checker- it looks like a screwdriver with a pigtail of wire with an alligator clip on the end. The tip of the 'screwdriver' has a point for probing. The light in the probe will light up...makes it easy to trouble shoot without a helper behind the trailer.
Hook the aligator clip to a good positive grounding point on the bumper or frame(not painted).
then pin by pin on the truck connection, stick the probe on each terminal tab.. and write a simple diagram where you find brake, tail, backup, etc...
Then i'd suggest, taking the connector off of your trailer, exposing the wire ends.
Run again thru your diagram and turn on each light of the truck. As you do, touch the wires from the trailer to that specific terminal. (make sure your ground wire is attached on the trailer) you can mark each wire with a piece of tape and label it which is which.
then simply attach your trailer wires according to your diagram to the terminals in the connector... that should get you in business..
hope that makes sense...
That way if the factory wiring harness remains the same, you'll be able to use it with other trailers if the need arises..

May 28, 2009 | 1999 Dodge Ram

2 Answers

What colour wire is the stoplight feed that feeds the stop lights


I'm assuming you have a trailer towing package.
Below is the wiring diagram. It appears the dark blue is your stop lamp wire you may be looking for.
Let me know if anything is different.
Regards,
moz-screenshot-6.jpg

0900c1528024882e.gif

Apr 06, 2009 | 2007 Chevrolet Uplander LS Minivan

Not finding what you are looking for?
2008 Saab 9-3 Logo

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...