Question about 2000 Oldsmobile Alero

2 Answers

Oldsmobile alreo is making a load motorcycle sound

2000 oldsmobile alreo is making a load motorcycle sound. The sound gets worse when I press on the gas petal. Also, the sound started off low then got progressively worse within a few minutes of driving.

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 921 Answers

Check for holes in the exhaust system.

Posted on Oct 03, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If it is by brakes it is your bearing. If it is by muffler you have a hole

Posted on Jan 18, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My engine is lock,I just put a new starter on it and my battery is good,I want to sell it 2000 Oldsmobile Alreo..

If the engine is "locked" (won't crank), the only thing you can do is REBUILD THE ENGINE.
Consider selling the vehicle to a scrap yard.

May 16, 2015 | 2000 Oldsmobile Alero

1 Answer

Labor for the repair of a 2000 oldsmoble alero

Should only be an hour job Terri, So what ever your shop's labor rate is.

Feb 03, 2014 | Oldsmobile Alero Cars & Trucks

3 Answers

I had the oil changed but the change oil light is still on, how do i reset the computer? 2000 oldsmobile alero

How to Reset the Change Oil Light

After changing the engine oil, the system must be reset.

With the ignition key to ON, push the RESET button

located in the driver's side instrument panel fuse block. The

CHANGE OIL light will start to flash, press and hold the

RESET button again. The reset is complete when you hear
the chimes sound and the CHANGE OIL light goes out.

Oct 25, 2010 | 2000 Oldsmobile Alero

2 Answers

The clutch is not engaging correctly- if you let clutch petal up, it slips (if you give gas it's worse). If no or little gas given, clutch slowly engages after the clutch petal is all the way up.

sounds like you may be able to adjust the clutch and correct the problem, look at the clutch cable and and adjust it some and see if it helps, if it does then adjust it til you feel it is right.

Oct 13, 2010 | 1985 Honda Civic

1 Answer

Car is VERY low on gas. When I tried to start it

you could boost the car and try to turn it over but you may be too low on gas to get it to the engine (side note gm likes to put the fuel pump in the gas take to keep it cool) running your car on less that 1/4 take its hard on the pump because it over heats and could be burned out

Dec 06, 2009 | 2000 Oldsmobile Silhouette

1 Answer

94 Bravada that stumbles and stalls.. won't start when warm..

Try checking the exhaust flow when someone else is pushing down on the gas petal.The farther the petal gos down,the more exhaust should be coming out. I replaced my catalitic convertor at 44000 miles, it was clogged. I had them install a high flow type.

Sep 03, 2009 | 1994 Oldsmobile Bravada

1 Answer

Oldsmobile Intrigue coolant light on service engine soon on

First try taking both of your battery cables off the battery and then touch the metal part of the cables together for one full minute...this will clear the error codes and return your computer to it's default settings. If all problems persist after doing this, I would suspect that the computer is bad. Let me know how you make out.

Jul 30, 2009 | 2000 Oldsmobile Silhouette

1 Answer

High pitched squeal in engine

loose fan belt?

Put the car in neutral, set the parking brake, open the hood, get someone to listen/see where the sound is coming from, as you press on the accelerator.

Dec 26, 2008 | 2000 Dodge Neon

1 Answer

1986 oldsmobile cutlass supreme

Either your oil needs to be changed but most importantly The clearance in the connecting rod bearing have more clearance then tolerances allow. This could be due in part of low oil pressure. The gauge might show safe pressure but a manual gauge would give an accurate pressure. Hope this helps.

Jul 30, 2008 | 1986 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
2000 Oldsmobile Alero Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides