Question about 1994 Suzuki Sidekick

1 Answer

Does the crankshaft pulley bolt have reversed threads on a 1994 suzuki sidekick

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 102 Answers

No, standard thread. Turn anticlockwise to undo. That bolt will be VERY tight, and make sure it is done up VERY tight when you put it back together. I recommend a drop of thread lock to avoid it coming loose later on. This bolt doesn't need to be removed to change the timing belt, but it does if you want to change the front crank seal.

Posted on Oct 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs


B: INSTALLATION
1) Install the crankshaft pulley.
2) Install the pulley bolt.
To lock the crankshaft, use ST.
ST 499977400 CRANKSHAFT PULLEY
WRENCH
(1) Clean the crankshaft pulley thread using an
air gun.
(2) Apply engine oil to the crankshaft pulley bolt
seat and thread.
(3) Tighten the bolts temporarily with tightening
torque of 44 N·m (4.5 kgf-m, 33 ft-lb).
(4) Tighten the crankshaft pulley bolts.
Tightening torque:
127 N·m (13 kgf-m, 94.0 ft-lb)

Apr 10, 2014 | 1997 Subaru Outback

1 Answer

How many foot pounds of torque should i tighten the bolt that holds on the harmonic balance on a 1996 subaru legacy outback


From FSM:

B: INSTALLATION
1) Install the crankshaft pulley.
2) Install the pulley bolt.
To lock the crankshaft, use ST.
ST 499977400 CRANKSHAFT PULLEY
WRENCH
(1) Clean the crankshaft pulley thread using an
air gun.
(2) Apply engine oil to the crankshaft pulley bolt
seat and thread.
(3) Tighten the bolts temporarily with tightening
torque of 44 N·m (4.5 kgf-m, 33 ft-lb).
(4) Tighten the crankshaft pulley bolts.
Tightening torque:
127 N·m (13 kgf-m, 94.0 ft-lb)

Apr 10, 2014 | 1998 Subaru Legacy

1 Answer

Front main seal replacement


Remove drive belts. Remove crankshaft pulley bolt. Remove crankshaft pulley. Remove front timing cover seal. Reverse procedure to install.

Apr 24, 2012 | 1994 Toyota Camry

2 Answers

How do i get my timing belt cover off a suzuki sidekick 1991 4x4


too much to type...you should go to an auto parts store and get a book on your truck about $20,00 it will have all the specs....

Jun 05, 2011 | 1991 Suzuki Sidekick

1 Answer

I have a1993 Geo Storm, 1.6L engine, having problem getting the bolt on the crankshaft pulley loose. Is it a left hand thread or a right hand thread.


The crankshaft pulley bolt loosens by turning Counter-Clockwise. Ensure the pulley is secure from movement so that you can loosen the pulley bolt without turning over the engine. You may need to use breaker bar to loosen the pulley bolt, or at least a large wrench.

Mar 16, 2011 | 1993 Geo Storm

1 Answer

I have a 94 grand cherokee, the bearing went out on the upper idler pulley. my question is are these standard or reverse threads on the bolt holding the pulley on and any tips on breaking this bolt loose...


Your threads should be standard right hand. Don't worry about the pulley turning when you break the bolt loose. The bolt is isolated from the pulley by a bearing (the one that failed) so the two turn independent of one another.

Good luck.

Jan 15, 2011 | 1994 Jeep Grand Cherokee

1 Answer

Can't get the crank pulley loose. is it left our right threads. i am replacing the water pump.


TURN CRANKSHAFT BOLT COUNTERCLOCKWISE TO LOOSEN. YOU HAVE RIGHT HAND THREADS.ENGINE TURNING CLOCKWISE.YOU NEED A STRAP WRENCH HOLD CRANKSHAFT PULLEY WHILE LOOSEN IT.BUT YOU NEED A CRANKSHAFT DAMPER REMOVAL TOOL.OR HARMONIC BALANCER REMOVAL TOOL.YOU NEED STRAP WRENCH TO HOLD CRANKSHAFT PULLEY WHEN TIGHTEN IT.TORQUE CRANKSHAFT PULLEY BOLT 90 - 98 FT LBS. MAKE JOB EASIER.HAVE A HELPER HOLD STRAP WRENCH WHEN YOU LOOSEN OR TIGHTEN CRANKSHAFT PULLEY.

Sep 19, 2010 | 1995 Mercury Villager

1 Answer

Need a diagram to replace the crank pulley on a 1990 Oldsmobile regency 98 3.8 liter


This is what I found on the 98 Regency instructions: Crankshaft Damper REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable.
  2. Remove the belts from the crankshaft pulley.
  3. Remove the crankshaft damper attaching bolt.
  4. Attach a suitable puller to the damper and remove the damper from the crankshaft. NOTE: On certain models, removal of the cooling fan, fan shroud or radiator may be necessary for clearance. WARNING
    DO NOT pry on the damper assembly to remove it from the vehicle or component damage will result. Remove the damper using a puller only.
  5. Installation is the reverse of removal. Torque the damper bolt to specification. Fig. 1: One example of a crankshaft damper puller tool 85843074.gif
    Fig. 2: Removing the crankshaft damper bolt 85843193.jpg Fig. 3: Do not attempt to pry on the damper to remove it from the crankshaft, use a puller only 85843194.jpg Fig. 4: Removing the damper from the crankshaft 85843195.jpg Fig. 5: When installing the damper, thread the bolt by hand first to prevent cross-threading 85843196.jpg prev.gif next.gif

Jul 04, 2010 | 1990 Oldsmobile Ninety Eight

1 Answer

Can water pump be removed and re-installed W/O removing any pulleys on a 1988 Samari Suzuki.


No. As both the water pump pump pulley and crankshaft pulley both partially cover the timing belt cover, they have to be removed to get the timing belt cover and the timing belt off. The only bolt you DON'T need to undo (unless you want to change the front crankshaft oil seal), is the centre bolt holding the crankshaft timing belt sprocket on. Only the surrounding 4 or 5 bolts need to be removed so the crankshaft pulley can be removed.

Jan 28, 2010 | 1988 Suzuki Samurai

1 Answer

1994 Suzuki Sidekick spark plug cover blown out.


Oh, ok. No, they shouldn't be related. The plug cover meaning the spark plug wire boot that goes over the spark plug hole? Why won't it stay in? Is the spark plug missing? Those plug wires snap onto the spaek plug holding the wire on the plug.. There should be a spark plug in the hole. If not, you probably had it blown out. That happens once in a blue moon. If the plug is missing, get a new one and carefully install it by hand, no rachet. If the plug won't start in the hole the first few threads mat be strippe. Do not cross-thread the new plug. Spark plug hole taps are available at parts stores. good luck

May 22, 2009 | 1994 Suzuki Sidekick

Not finding what you are looking for?
1994 Suzuki Sidekick Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...