Question about 2002 Dodge Intrepid

1 Answer

Having trouble with my transmision in my dodge intrepid what is PO700 ? We put it on a machine and it said that the PO700 codes is bad, please let me know what that is.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 617 Answers

Here's what my service manual says:

EATX Controller DTC Present

This SBEC III or JTEC DTC indicates that the EATX or Aisin controller has an active fault and has illuminated the MIL via a CCD (EATX) or SCI (Aisin) message. The spscific fault must be acquired from the EATX via CCD or from the Aisin via ISO-9141.

Here's what I know: MIL=malfunction indicator light; DTC=diganostic trouble code; CCD=Chrysler collision detection. Beyond that, I'm clueless. Sounds like it needs to be read out at the dealer. Then again, if it was a one-time glitch, it might clear itself after several drive cycles.

Posted on Feb 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dtc Code P2314


2002 Dodge Intrepid Ignition Coil Circuit Codes: Electrical ...

www.2carpros.com/.../dodge-intrepid-2002-dodge-intrepid-ignition-coil...
Aug 13, 2008 - 2002 Dodge Intrepid 6 cyl Front Wheel Drive Automatic 130000 miles. Getting the following codes. P0353 P2302 P2305 P2308 P2311 P2314

What are 2002 Dodge Intrepid trouble codes PO442 and ...

www.answers.com > ... > American Cars > Dodge > Dodge Intrepid
What does the Error Code P0846 on 2002 Dodge Intrepid mean? .... Trouble code P2314 means: Ignition coil E, secondary circuit - malfunction Trouble code .

Oct 29, 2015 | 2002 Dodge Intrepid

2 Answers

MY INTREPID IS CODING PO700 AND PO871 HELP


well both of these codes are transmission codes you should take it to a transmission specialist

Jul 16, 2014 | 2003 Dodge Intrepid

1 Answer

What is a PO731 & PO700 For a 97 dodge intrepid


Code 731 is for a problem with the gear ratio for first gear.
Code 700 is a general fault code that means you have a problem with the transmission control module or the transmission.
The 731 code can cause the 700 code, and the problem could be a speed sensor inside the transmission. The computer does not like the signal being sent from the transmission to the computer.

Apr 07, 2013 | Cars & Trucks

1 Answer

What is PO700 code on 04 doge intepid


P0700 meas there is a code in the TCM (transmission control module). You will need to scan the TCM for fault codes and diagnose that code.

Apr 24, 2011 | 2004 Dodge Intrepid

1 Answer

Po700 trans error po732 gear 2 ratio incorrect


dodges do not have a strong transmission, I would be checking salvage yards for a replacement.

Jan 13, 2010 | Dodge Caravan Cars & Trucks

1 Answer

2002 Dodge Intrepid- check engine light came on gave me trouble code PO700?


This code indicates an automatic transmission control problem. The presence of this code means that the transmission control module or TCM has detected a fault and relayed it to the PCM. It could be a TCM related solenoid has failed or is damaged or the TCM itself could be faulty. Best wishes.

Aug 18, 2009 | 2002 Dodge Intrepid

1 Answer

I have a 2002 intrepid SXT 3.5L automatic trans(not the auto stick version) Just got codes PO700 and P1776 Would like to know what the codes indicate, and what repairs could be needed?


P0700 is an alert code the p1776 is the actual trouble code.
Code p1776 is solenoid switch valve latched in low/reverse position. Valve is located in valve body not solenoid body reploace it

Jul 17, 2009 | 1999 Dodge Caravan

1 Answer

I OWN A 2002 DODGE INTREPID AND IT COMES UP WITH THESE CODES P0700,P0056,P0135,P0141,P0155,P0161 CAN YOU TELL ME WHAT THEY MEAN?


po700 is automatic transmission fault detected. poo56 is didnt see .po135 is upstream heated o2sensor heater circuit fault bank 1. po155 upstream heated o2 sensor heater circuit fault bank2.po 161 is downstream heated o2 sensor heater circuit fault bank 2.

May 15, 2009 | 2002 Dodge Intrepid

Not finding what you are looking for?
2002 Dodge Intrepid Logo

548 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...