Question about 1999 Mitsubishi Diamante

2 Answers

Clicking sound from A/C

I have a loud clicking sound around the glove compartment area. Around 10 clicks then it stops. Happens at random times while heat/ac is on. Never while it is off. Doesn't matter the temp or speed the blower is in. Also, does not seem to affect the operation.I have climate control if that helps? But again, doesn't matter if its ac,. heat, auto, non auto, temp, setting, defrost, floor or panel vents.... nothing maters as long as its i got the ac going it does this

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I get the same clicking sounds. How hard is the control to replace?

Posted on Nov 23, 2009

  • trixr4kids Nov 21, 2010

    Solution < had same problem 1999 chevy k1500 turned out it was the actuator motor sleeve that slides around the door shaft in the actuator in time it has a tendency to back off just push it back in thats all if you dont know where it is just feel where the noise is coming from youll find it wes

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 77,169 Answers

The clicking is caused by a part called a temperature control ac/heater blend door actuator motor, most likely the door it moves is sticking and the little gear drive inside the part is clicking.

Posted on Oct 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2012 Fiesta clicking sound coming from glove compartment


I think this may be the heater/AC air temperature control blend door actuator motor gears slipping over teeth, this is due to a sticking blend door that is hard for the electric motor to move due to heat warping. Remove the dash and replace them is my advice.

Jun 30, 2016 | Ford Fiesta Cars & Trucks

1 Answer

Clicking in dash and no hot air


Blower motor worn and weak, taking time to actually start due to worn out brushes in the blower motor. Change the blower motor. The clicking that you hear is actually the springs that provide tension on the brushes. Sounds like the brushes have fell out, leaving only the springs to provide the needed voltage. Springs rubbing the contacts will sound like a slow click click click at first, but will speed up as the motor shaft starts spinning faster.

Dec 08, 2013 | 2003 Chevrolet Impala

1 Answer

2005 Ford Mustang GT -loud clicking noise in audio system


There is a possibility that the cellular phone is interfering with the audio system. Cell phones communicate on their own with cell hubs to change locations, or to receive mails. Try to place the celular in a different position, or to turn it off on a single trip to see if the clicking disappears.

Jan 30, 2010 | Ford Mustang Cars & Trucks

1 Answer

My headlights keep going off and on while driving in my 95 Chvey S10. When it does this, I can hear the relays clicking loudly in the glove compartment


head light switch -no doubt about it. had the problem for about a week til i got tired of the lights going off and on replaced the switch for $25 at autozone pulled the switch out no more light problems or clicking in the glove box area, took about 15 whole seconds to replace the switch, i know this will work,HB

Jan 06, 2010 | 1995 Chevrolet S-10 CA Edition

1 Answer

Clicking coming from the clove compartment


sounds like the tempature selector motor is hanging up. its located between the glove box and the center vents in the dash.

Jun 11, 2009 | 1994 Chevrolet Suburban

4 Answers

Brake lights on 306 TDi not working, bulbs and fuses ok


hi don,t usually have relays on brake lights check your brake light switch take the wires off the switch connect together with the ignition on see if the lights come on they should yates210456

Oct 09, 2008 | 1989 Peugeot 405

Not finding what you are looking for?
1999 Mitsubishi Diamante Logo

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8732 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...