Question about Subaru Forester

2 Answers

Fog lights are burnt out i would like to replace them ??

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

Front Fog Light Assembly

REMOVAL

  1. Disconnect the ground cable from battery.

  • Remove the two clips and lower mudguard.
  • Disconnect the harness connector.
Remove the lower bolts.

  1. Remove the mounting bolts and clip, and then detach the fog light assembly.
INSTALLATION

Install in the reverse order of removal.
Front Fog Light Bulb

REMOVAL

  1. Remove the front fog light assembly.
Remove the back cover.

  1. Remove the spring retainer, and then detach the fog light bulb.
INSTALLATION

Install in the reverse order of removal.

Posted on Oct 03, 2009

  • INDIRA KUMAR
    INDIRA KUMAR Oct 03, 2009

    You can try to replace the fog light bulb now or remove the two 10mm bolts and slide the fog light assemble out through the front of the bumper. Turn the cover of the rear of the fog light and replace light.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

I dont get the question? are you asking permission? the bulbs should be easy to get from any quality parts store.

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix daytime running lights


this sounds like the DTRL module is bad and needs replacing. the fog lights the bulbs them self could be burnt out or the switch for the lights has a problem.

Sep 04, 2014 | 2003 Ford Windstar

1 Answer

Fog lights are not working what could be the problem?


Find fuse check it or relay, replace the switch or if u ever smelled a burning smell then check pigtail to the switch but first get a light tester trace wires from lights u could of a burnt bulb

Jun 25, 2012 | 2005 Chrysler 300

1 Answer

No power goin to the fog lights switch the switch seems to work and i replaced the relay and i cant find any other fuses for it


Do you have one relay for the fog lights. There should be two in the PDC box. Are the bulbs and connections working and verified that they are not burnt out?

Jan 01, 2011 | 1998 Jeep Cherokee

1 Answer

Liberty 2006 : Cruise control and fog lamps are not working... Lamps are not burnt out. Cruise light indicator does not light...


It sounds like your multifunction switch has an internal failure and needs to be replaced. This is the part that you flip to use the turn signals, wipers, cruise control, fog lamps, etc. This can be an expensive part, but it is almost certainly the cause of your concern.

Let me know if you'd like to know how to replace it. It is a fairly easy part to replace.

Hope this helps!

Aug 30, 2010 | 2006 Jeep Liberty

1 Answer

How to fix inop fog light on indicator light on


the tiny bulb that lights up the switch is burnt out, the bulb is supposed top last the life of the of the switch, but they do burn out, replace the switch, about $25.00

Feb 21, 2010 | 2003 Acura 3.2TL

1 Answer

My headlights won't come on. I replaced the headlight switch about a month ago. I went to Autozone to see if another switch would work and it didn't. What could I do to fix the problem. I have a 1991 Ford...


Did you check the wiring when you replace the switch? Some times the plug that you plug into the light will be melted or burnt. I know cause I had 2 - 5.0 stangs and both did the samething. Is the car equip with fog lights? If so I would disconnect them. I found that the fog lights on my 89 gt cause the head light switch to over heat and melt. On both I had to repair the wiring at the plug.

Oct 30, 2009 | 1991 Ford Mustang

1 Answer

Fog lights


check the relay for the fog lamps as well as the fuse as well consider the possibility the bulbs are burnt out

Feb 25, 2009 | 2003 Saturn L-Series

1 Answer

Low fog lights dont work s type jag


look in the fuse box (should be one in the engine compartment possibly near the battery) for the relay that controls your fog lamps... it may need replacement... you have checked the bulbs to make sure they are not burnt out ?

Feb 08, 2009 | 2000 Jaguar S-Type

1 Answer

01 solara fog lamp replacement


nono... go in through the engine. Pop the hood and you can do it without detaching anything but the old fog lamp.

Dec 01, 2008 | 1999 Toyota Camry Solara

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...