Question about 1996 Honda Accord

1 Answer

Tool needed to remove SRS Control Module fro 1997 Honda Accord

What tool do I need to remove the SRS Control Module from a 1997 Honda Accord ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Honda Expert
  • 268 Answers

Hi, the bit is called a Torx Bit or a star bit. Don't get the type for a screwdriver, get the socket that would go on a ratchet, you'll need to put an extension on it of course to get in there. Push hard or it will strip. Give Honda a call and ask them what size it is for your car for sure, might be a 6mm or you can just buy a metric Torx Bit Set. Separately they are $3.99 at Autozone. Not sure how much the kit is. Good luck.

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove SRS LIGHT


First you have to check for codes

Then diagnose the srs issue,if there is one

You need professional scan tool software &
then go to Enhanced Mode, to access the srs
system module

So your done & need a repair shop

Sep 07, 2013 | 2007 Honda CR-V

1 Answer

1997 honda accord tranmission problem code p0700 drive 4 flashes


Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory.
This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module.

Symptoms Symptoms of a P0700 DTC may include:
  • Malfunction Indicator Lamp (MIL) illumination
  • The transmission may exhibit drivability problems like slipping, etc.
Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely).
Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission.
If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself.

Oct 20, 2012 | 1997 Honda Accord

1 Answer

1997 honda civic 1.6L DX SRS Air Bag light stuck on after drove throo heavy rain!


A code reader may not access the body computer, but a professional scanner should. You may be able to research the air bag system online and find a way to make the light flash the codes.
I would guess after reading your description one of the front crash sensors got water in the connector and the sensor has failed.

Sep 27, 2012 | Honda Cars & Trucks

2 Answers

Right front brake problems with 1996 honda accord lx


Sure.
The flex hose is blocked inside.
Try disconnecting the hose and see what comes out of the steel line.

Aug 02, 2012 | 1996 Honda Accord

1 Answer

I have 1992 honda accord srs light is on & sometimes d4 on?


d4 is engine control module and has it got both driver and passenger airbag fitted or just driver. as yours is on the change over

Dec 22, 2011 | 1992 Honda Accord

1 Answer

My Honda Accord 1997, the air bags deployed, and I replaced them and the SRS light is still on.


might have a code stored from when air bags blew or module or sensor needs to be replaced also.

Nov 11, 2010 | 1996 Honda Accord

1 Answer

Battery was low and put in new battery,problem SRC Light stays on how can I reset the SRC light?


I'm guessing you mean the SRS light, yes. When you have a bad battery the battery voltage can drop below 10 volts. The SRS unit detects this voltage loss and set a DTC (diagnostic trouble code) for an internal SRS unit failure. You have to erase the DTC memory. You'll need an SCS service connector tool (P/N 07PAZ-0010100) You can order one from your local honda dealer. Don't worry its not more than $10. Then you'll have to find the MES 2pin connector located in the upper right hand corner of the drivers underdash fuse box. It can be gray, green or yellow in color. 1.)Turn the ignition switch off. 2.)Unplug the MES connector from the fuse box and plug your SCS special tool into the MES connector. 3.) Turn the ignition switch on. 4.) The (red) SRS light in the dash will come on for 6 seconds and then go off. Remove the SCS tool from the MES (2P) connector within 4 sec. after the SRS light went off. 5.) The SRS light comes on again. Reconnect the SCS tool to the MES (2P) connector within 4 seconds after the SRS light came on. 6.) The SRS light goes off. Remove the SCS tool from the MES (2P) connector within 4 sec. 7.) The SRS light indicates that the memory is erased by blinking twice. 8.) Turn the ignition switch off and wait ten seconds. You may have to do this procedure a few time to get the steps correct. If this sounds to complicated I'm sure your local Honda dealer would be happy to reset the light for you for no charge. Just let them know that the battery was recently replaced and you think that the SRS light came on due to low battery voltage. -Hope this helps:)

Jan 13, 2010 | 1997 Honda Civic

1 Answer

How to replace the SRS controller on a ex wagon


the srs unit is located under the passenger side dash under the rug and under a metal cover.

Oct 24, 2009 | 1997 Honda Accord

2 Answers

96 honda accord airbag module......


does the srs light come on and go off at random times and sometimes stay on if that is so check the srs switch under your seat it try moving round in the seat applying weight in diff locations and see if it goes off and on if so then you might need to replace that switch

Mar 05, 2009 | 1999 Honda Accord

Not finding what you are looking for?
1996 Honda Accord Logo

Related Topics:

514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...