Question about 1999 Ford F150 Regular Cab

1 Answer

I installed a new clutch and tranny is now stuck in 4th gear

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 95 Answers

It sounds like the clutch is not releasing. You may need to bleed air out of the slave cylinder. Does it feel like it has pressure against the pedal? If you back out the transmission mounting bolts just enough to slide it back 1/4", you may find that it comes out of gear. This would mean the clutch is not releasing when depressed.

Posted on Oct 02, 2009

Testimonial: "thanks i will bleed the lines again"

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I installed a complete clutch & Flywheel. I popped outta 1st gear & won't go into any gear whatsoever. Linkage & slave cylinder work! feels like it's going into gear but when i let clutch out nothing

Isolate the problem. Sound like clutch is stuck and not disengaging. Engine off put in gear and rock the vehicle,, with help from a friend press clutch pedal while in gear and have friend push, you will know if the tranny is ok and clutch is stuck. Now check the clutch, slave etc for engagment and disengagment / Clutch linkage- movement/travel may need adjustment or you have something wrong in the reassembly..

Feb 08, 2016 | Cars & Trucks

1 Answer

I have a 98 Chevy cavalier , it has Manuel transmission, it will only go in 3rd and 4th gear, what could be the problem

It could obviously be the tranny is gone, but you would want to make sure you have enough clutch flood and the clutch is fully engaging. I had a leak in my 98 cavalier clutch fluid, and when it got low, it would not fully engage the clutch, simply making it hard to get into gear. Its DOT3 fluid. If so try reversing a little bit and gently tiring to get into gear. I believe 1st and 2nd gear share the same gear selection fork inside the tranny. Drain fluid and look for metal.

Feb 16, 2015 | 1998 Chevrolet Cavalier

1 Answer

1992 ford 4 x 4 6 cly tranny stuck in 4th ,,,,,,,help

If it is standard, could be a bad clutch or clutch cylinder, sounds like a bad slave cylinder on the clutch. Check the clutch fluid level. Should be near the brake fluid and should be the same fluid as well.

Sep 20, 2014 | Cars & Trucks

1 Answer

I suddenly lost 4th gear and reverse, what would cause that, i dont believe i am low on tranny fluid(gear oil) but im not sure, but, i was told that there is an adjustment on the shift linkage, but that is...

Its a sylinoid and that is located inside tranny pan. Or its bent linkage. Only way to know for sure is go in and see. Does your car have a anallisus hook up? If so then the code will tell you where the problem is. Hook er up and find out first, tranny work aint cheep. I just put one in the other day. Boss charged 2800 for the job. Good Luck.

Sep 13, 2013 | 2000 Mitsubishi Eclipse

2 Answers

WHat are the transmission fault codes for the 200 S-Type PO734 and PO741 mean?

I am having problems with the drive gear it seems like its not going into gear. It drives fine when Im shifting it in 2,3rd and 4th gear. I have had the gearbox function light came on then will reset its self. I was having the check engine light on and skips between 40 and 60? Its a 2000 S type 8v with 61,000 miles! Does anyone know what could be wrong?

Sep 07, 2010 | 2000 Jaguar S-Type

2 Answers

I have a 92 2 wheel drive Toyota pick up 5 speed transmission 2.4 liter engine. When I let up on the gas while in gear there is clicking/rattling noise in all gears except 4th gear. If I push down on the...

Sounds like you have a defectine cluthch componant. Best way to verify is get the rear axle off the ground . So as not to let the rear drive wheels make contact with the ground. Have an assistant start the truck and put it in gear. After making sure the vehicle is secure crawl under the vehicle and listen to comfirm that the noise is coming from the clutch area.

Mar 25, 2010 | 1992 Toyota Pickup

1 Answer

Just replaced trannie(auto) in 1993 escort, it has a little hesitation when shifting gears and the new oil smells burnt and is frothy on the tip. the level is low could the low fluid level be the problem?

YES! But your tranny has a BAND for first gear, and clutches for 2nd, third, and if equipted, 4th. The bands are usually the cause of the "burnt smell." The foam is cause by fluid aggitation. DO NOT JUST ADD FLUID. Drain the fluid in the tranny case, and replace the filter, and the fluid. I suspect that the salvaged tranny may have a burned 1st gear band.

Mar 21, 2010 | 2000 Lexus RX 300

2 Answers


definitely something in the tranny

Apr 15, 2009 | 2001 Volkswagen Jetta TDI

1 Answer

Tranny or clutch?

Suspect would be the clutch. If there is not grinding in any gears 1st 2nd 3rd 4th 5th and reverse when you give it gas, then i would check the clutch.

Feb 02, 2009 | 2005 Chevrolet Colorado

1 Answer

Tranny Lock

syncro problem
low on oil
check stick shift adjustments
shift stick bushes or a cable problem
check engine mounts
gearbox, fork or clutch worn

Mar 11, 2017 | 1987 Toyota Celica

Not finding what you are looking for?
1999 Ford F150 Regular Cab Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers


Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides