Question about 2000 Dodge Durango

1 Answer

Need a Part: The bottom cable guide for pulling the power window down on the drivers side. The piece is made of plastic, it looks like a half circle with a groove for the cable to ride. it snaps in to the bottom of the rail that houses the window when it is in the down position. Is this a dealer piece only?

Posted by on

  • yadayada
    yadayada May 11, 2010

    we are not a parts supplier, just tech service.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 454 Answers

Go to a pull-it-yourself junk yard to get a replacement. The dealer is going to make you order an entire window regulator assembly.

Posted on Oct 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Rear door panel removal:rear door window just fell down oneday and i was told it might just be off the track. it has electric windows


Its not off the track!!
You just lost the holders clipping your window glass piece.
  • Look for screws in door panel or around the speaker vents.
  • If you are sure that the speaker cant be removed without opening the door panel then read this below.
  • Mostly seen near areas like door lever(inside), power window switch set, bottom and each sides of the whole panel.
  • If its manual window, then look for a circle clip in between the winding window lever and the door panel. Plunge screw driver between them a make a gap then look.
  • Assure that all clips or screws which obstacles the removal of the panel.
  • Simply pull the panel from sides towards you

Sep 23, 2011 | 2007 Chevrolet Malibu SS Sedan New Cars

3 Answers

My 2004 pontiac grand prix window it will go down


Does it try to come up, EG is there power being applied when you press the UP switch? if it makes no sound or movement when pressing the UP switch it is probably a worn out switch - available at Pontiac dealers though you may have to order it and wait a few days - have your VIN number for the parts desk and you'll get the part in no time - the switch levers out of the panel - use a plastic tool if possible to prize the switch out so you don't damage the surrounding trim - the cable connector clips off the old switch and goes on the new switch, press the switch home into the recess and jiggle it a bit to make it dead flat - window should work now.
If it IS making an effort to come up then either you have a poor earth or power connection making it so there is not enough power to pull the windows up (which is harder than down due to the weight of the window) -- check the cabling behind the door panel, and as above pull out the switch and check its connector too.
OR... the window is out of alignment and is jamming - putting it back in alignment means taking off the door panel and getting at the bottom of the window runner, loosening the bolt(s) on the bottom of the runner and moving it sideways so it hold the window steady but not tightly, you may have to try having it tighter or looser against the window till you get the best performance - also oil the moving parts/cables of the window mechanism (dont get oil on the glass, it will smear for weeks) to give the best chance of smooth operation.

Jan 25, 2010 | 2004 Pontiac Grand Prix

2 Answers

Window falls down when i use it


the seat clamps for the window on window arm are stationary and built into bottom of glass... if broken then new piece of glass needs to be purchased... if not then can basically be reseated back in joists... of course this involves taking off the inner door panel and removing the entire system... more than likely be prepared to replace the glass

Jan 06, 2010 | 1999 Pontiac Grand Am GT

1 Answer

Drivers side window sticks have way up


Something inside is broken, obviously. If you can identify it from the picture you should be able to order that part (bring the diagram)
Diagram is power and manual.
9a3a68d.jpg

Sep 19, 2009 | 2000 Chevrolet Cavalier

1 Answer

Power window of front driver side door will not go beyond half


THis is common Too common. As I posted before.

It is broken and catching the window on the way up.

As I posted in the Passat questions.

The jetta may slightly differ.

Yes. If your window has fallen down and will not roll up.
99% Chance you car is suffering the Infamous VW plastic clip.

The door panel comes off With a T-10 torx or a Hex (Allen) wrench
that will fit and A large Philips Screw Driver..

Remove the Plastic cover on the inside Door handle.
And the Screw or Screw along the Bottom of the door panel.
Then remove the screws that hold the handle the the door.
They are located behind the Plastic plate you removed with a tiny screw driver earlier... Be careful not the mark up the cover whaytprying it up. It is best to pry from underneath. Where marks if made can not be seen

After the screws are out 4 I believe. The Use of a CLip tool ir best.
For getting behind the panel to pop it off. A screw driver will work.

After all the clips are released. Pull the light at the bottom of the panel down and out. Disconnect it ur push it back thought the hole it came from..

Now you need a 10mm socket, or wrench to remove the 12 bolts that hold the metal plate to the Door. Remove all the 10mm bolts, If the widow has not already fallen in the door. It should be released. By removing the Black 2" plugs. THe loosen the bolts that clamp the window the the arms. DO NOT LOOSEN THEM ALL the way, .
Disconect the all the wiring.. THe Door lock cable,can be a pain.
I think it pulls down,.
Next remove the Metal plate. that is the regulator.

reverse to install

SKETCHLAB.com

May 10, 2009 | 1998 Volkswagen Jetta

2 Answers

Driver's window won't roll up all the way


If you have power windows it should be a broken cable, If its manual then it should be the crank asm. or the white plastic trac, it may torn at the end.

Apr 24, 2009 | 2002 Pontiac Grand Am

1 Answer

Drivers side window won't go up or down


Have you checked the window regulator. (electric window motor). I seems a comon problem for the plastic to break at the bottom where the wire which pulls the glass up and down. The motor will still sound (clunk) if you use the window switch but will not lift the window.

Remove the trim off the door.
Undo the bolts holding the glass into the plastic at the bottom of the window and carefully remove the glass.
Unbolt and remove the sliding piece that holds the glass.
You should find the broken plastic at the bottom.

Replace and reinstall. Aftermarket parts are available at a fraction of the cost of buying new nissan parts. Second hand parts are available but costly.

Apr 24, 2009 | 1994 Nissan Pathfinder

2 Answers

My 2001 Dodge Durango window will not go up or down.


Sounds like the ball link for the window regulator broke. You will need to remove the door panel for a closer inspection. Most auto parts stores have the replacment parts

Mar 21, 2009 | 2001 Dodge Durango

2 Answers

Driver power window problem


On my 2000 Durango, I found that the plastic cable guides had broken and fallen to the bottom of the door. This allowed the cable to lose tension which basically disconnected the window from the regulator. If you can hear the regulator motor run (power windows) when you press the window switch, then the regulator is good. Remove the door trim panel screws, pull off the door lock handle, pull the trim panel away slightly, and disconnect the plastic retainer from the door latch linkage.Then unlock the wiring connectors and remove them. Now the trim panel can be removed. Peel the plastic seal from the inner door. Now you can see inside the door and figure out what happened. A mechanic's mirror will help. Replacement window regulators are available from a number of sources; the cable and/or guides are a dealer item.

Nov 12, 2008 | 2001 Dodge Durango

Not finding what you are looking for?
2000 Dodge Durango Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...