Question about 2002 Jeep Liberty

1 Answer

I want to take the rails off the roof of the jeep. How?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Should be access holes along the side of the rail. Don't remember what size they are but they are torx head.

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I install the cross rails on a 2008 suburban roof rack


but that's all you need to do is remove the end piece on both sides and slide the cross rails in and replace the ends

T-15 is the size...Its a good idea to check them regularly if you use the rack regularly...>
Cross rails retaining screws

Mar 07, 2015 | 2008 Chevrolet Suburban

1 Answer

How do I adjust the rails on the roof rack


you should see push in buttons on the rails to unlock them so you can slide the rails forward or back they might be stuck so get some wd40 or PB blaster to free them up

Aug 09, 2014 | Lincoln Navigator Cars & Trucks

1 Answer

Restore finish on forester roof rail, sun bleached


This effect is the anodizing deterioration, and cannot be redone. Consider pulling the roof rail off and painting with black epoxy paint.

May 19, 2014 | 2003 Subaru Forester

1 Answer

How to remove roof rail mounts


Removing roof rail mount can cause roof damage. And i think you just be careful while removing rail mount. You just need the screw driver and obviously little bit of effort. And in case you make your roof damaged then you should quickly apply Liquid Roofing
Liquid Roof AND RV Roof Coatings

Mar 02, 2014 | Cars & Trucks

1 Answer

Rain water leaked thru the inside light of my car Jeep compass 2008 Model.I checked there is no hole on the roof.


Does the vehicle have a sun/moon roof? If so, it is common for the drain tube to become plugged which causes the water to back up into the sun roof module. The water then spills over into the rails that run side to side and leaks into the passenger compartment. The low point of the roof rails being the interior light. Open the sun roof all of the way and look for the drain tube(s). They usually tap into one or more of the corners of the sun roof module and then follow the conture of the vehicle either to the front or rear and drain the water out near the wheelhouse area. You'll need to find some way to disconnect the tubes from the module and flush the debris out. It is usually tiny bits of dust or sand that will flush out quite easily. You have to watch out for a couple of things. Do not drop the tubes as they may fall into the channel of the vehicle, and, use very light water pressure when flushing. There may be other connections in the hose downstream, and you don't want to dislodge those connections.

Nov 22, 2010 | Jeep Compass Cars & Trucks

1 Answer

Trying to reinstall the roof cargo racks on the rails of a 01 jeep cherokee my son took off and cant remember to put on


That's usually easier to do if you remove one side rail.
There are usually six access holes in the rail that the screws go into. (pretty sure the screws are torx type) Once the rail is off, you can easily attach the cross bars and re-attach the rail to the roof. Ends of cross bars are held on with a screw that goes in from the bottom side. When replacing roof screws it is good to put a dab of silicone sealer on each screw hole to prevent rust or leaks.

Dec 29, 2009 | 2001 Jeep Cherokee

1 Answer

How do you remove the roof rails on a 92 Camry SW? I was able to get the rack off but not the rails running the length of the roof. They appear to have rivets or some type of square drive screw heads on...


the rails are riveted or screwed to the roof screws are easy obviously,rivets need to be gently drilled out by a drill size that just is a tiny bit larger than the hole in the middle of the rivet and drill till the top of the rivet pops off(not much drilling required,then you need to block off all the holes otherwise the roof will rust through,you may need to clean and seal it carefully

Nov 03, 2009 | 1996 Toyota Camry

1 Answer

Rain water leaks from overhead console (No sunroof)


common problem with these roof racks check for loose bolts holding it on also there are inserts pressed into your roof under the roof rack these threaded insrts tend to come loose or get pulled out use silocone sealant around every bolt and insert.

Sep 19, 2009 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2002 Jeep Liberty Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...