Question about 2004 Hyundai Tiburon

1 Answer

Where can i buy a red engine rocker cover for my 2004 Hyundai Tiburon. I believe that is what they call them its a cover that covers the spark plugs and other stuff on my 2004 Hyundai Tiburon.

Posted by on

  • silver top May 11, 2010

    hi if you men the plastic cover that covers /hides the top of engine that is easily removed ? then if you have the origional ? why not spray can diy? or if no origional ? seek out breakers ? and do the same

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

You talking about the Cam Cover? (what used to be called the 'VALVE COVER")? WELL NOW, you can get the part you're talkling about by calling either an authorized Hyundai Parts store, or a junkyard.

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

V6 engine problem. Went to replace spark plugs... upon removal one side of engine spark plugs were in great shape, other side engine spark plugs were trashed.. what is problem?


oil leak in valve cover got gasget in side valve cover and if plug wires wear not on like thay got to be that well do it dont seal

Feb 19, 2015 | 2004 Hyundai Tiburon GT V6

1 Answer

Vacuum diagram for a 2004 tiburon


There is only 4 vacuum lines on that engine

1- brake booster line

2- purge line to purge solenoid (top center of throttle body)

3- PCV hose. run straight from PCV to side of intake at base of throttle body

4- fuel pressure regulator line (short small diameter hose runs from #6 intake runner to fuel pressure regulator

5- tube that connects front cam cover to rear cam cover to improve vapor venting

http://www.hyundai-forums.com/attachments/gk-tiburon-coupe-s111-2003-2008/38204d1276396353-vacuum-lines-2004-tiberon-pict0001.jpg

Jun 25, 2012 | Hyundai Tiburon Cars & Trucks

1 Answer

How to remove rocker arm cover, to change spark plugs.


You shouldn't need to remove the rocker arm cover/valve cover. All you should need is a long extention with the spark plug socket on the end of it and just put it down in the hole. You didn't mention the model or year of your hyundai but in many of the Hyundais, this is the case. I know in all cases the valve cover does not need to be removed in order to change the plugs. I hope this helps you and good luck.

Jun 21, 2011 | Hyundai Accent Cars & Trucks

1 Answer

Hyundai Tiburon: Replacing plastic cover that encases everything.


Call around to your local auto wrecker/salvage yards, and check ebay before you go to a Hyundai dealer.

Apr 19, 2010 | 2003 Hyundai Tiburon

1 Answer

How do you change the spark plugs on a 2005 hyundai tiburon


If v6 may need to remove intake manifold and applicable parts to gain acess to spark plug coils, remove coils and remove plugs install reverse order
If 4 cyl remaove cover on valve cover remove spark plug coils etc.

Oct 20, 2009 | 2004 Hyundai Tiburon

1 Answer

I need to replace spark plugs and wires on my santa fe v-6. Do i need to remove the intake manifold?


There may be an engine cover over the valve covers that is a big piece of plastic that may say Hyundai, or Santa Fe,

I believe its three or four 10mm retaining nuts that hold it on, take that engine cover off, and there should be 3 wires in the top of each valve cover, those big wires are the spark plug wires, and they actually connect to the spark plug which is down inside the cylinder.
To remove, you will need a 3/8 drive ratchet, a long extension, I would say 6-12 inches, long enough, but not too long, and a 5/8" spark plug socket.
Take one of the spark plug wires out, and put your long extension with the spark plug socket on it down into the hole that the big wire came out of and you should find a spark plug at the end of the tunnel.

Oct 04, 2009 | 2004 Hyundai Santa Fe

1 Answer

How to change out valve cover gaskets on a 1989 Lincoln Town Car


This is All you need for this Repair, ALSO Be Sure ALL GASKET SURFACES ARE VERY CLEAN. This Engine Requires MORE than MOST ALL Engines do for this Repair.

REMOVAL

  1. To remove a valve rocker arm cover from the RH cylinder head, disconnect PCV closure tube from oil fill stand pipe at rocker cover.
  2. Remove the Thermactor bypass valve and air supply hoses as necessary to provide clearance.
  3. Disconnect the spark plug wires from the spark plugs using Spark Plug Wire Remover T74P-6666-A or equivalent. Do not pull on wire. Remove the wires and bracket assembly from the rocker arm cover attaching stud and position the wires out of the way. ALSO MARK THEM AS TO WHERE THEY CAME FROM !!!
  4. Remove upper intake manifold.
  5. Remove attaching bolts and remove the cover.
INSTALLATION

  1. Clean the valve rocker arm cover(s) and the cylinder head gasket surface(s). Position a new service valve rocker cover gasket.
  2. Position the cover(s) on the cylinder head(s). The cover is tightened in two steps. Tighten the bolts to 14-18 N.m (10-13 lb-ft). Two minutes later, tighten the bolts to the same specification.
  3. Install the crankcase ventilation tube in the RH cover.
  4. Install upper intake manifold.
  5. Install the spark plug wires and bracket assembly on the rocker arm cover attaching stud. Connect the spark plug wires. Install the air intake duct assembly.
  6. Install the Thermactor bypass valve and air supply hoses (if required).

Oct 03, 2009 | 1989 Lincoln Town Car

1 Answer

Change sparks plugs on 06 hyundai sonata v6


You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold

Jul 08, 2009 | 2006 Hyundai Sonata

1 Answer

How to change spark plugs on hyundai 2004 2.4L


Remove the plastic cover that goes over the engine (the one with the Hyundai logo).
At this point, you will see the cables that goe to each fo the spark plugs.
Noting their position, remove them.
The spark plugs are ready to be removed, turn counterclockwise and replace with manufacturer recomended ones.

Apr 30, 2009 | 2004 Hyundai Santa Fe

1 Answer

Change spark plugs on hyundai coupe v6 2.7 2002


To change the sparkplugs you have to actually remove the black and silver shield, then take the headers off. There are bolts hidden under the middle silver pieces, they pop right out. There is also a bolt under the Hyundai H logo on the cover.

Nov 18, 2008 | 2003 Hyundai Tiburon

Not finding what you are looking for?
2004 Hyundai Tiburon Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...