Question about 2005 Toyota Tacoma

1 Answer

2005 toyota tacoma 4x4...just had the clutch and presser plate replaced...stuck in 6th gear....I have no money if i take it back to the mechanic and it is something extra I am in trouble..it has been setting for 3 weeks...need advise..does this sound like a problem he caused...shifter is like in neutral can not find a gear, clutch is operational..it does disengage help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 474 Answers

Did it work before? if so it may be that the clutch was not bled properly. if you can have someone gently push on the truck and let it go creating a rocking motion while you try to put it in neutral. if it goes into neutral the clutch was not bled correctly

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Toyota Tacoma 3.4L 5-speed manual feels like 4x4 is not fully engaging.


check that the clutch is fully engaging by checking if there is free play at the throw out lever and clutch push rod . If you cannot push the rod back into the cylinder then the slipping is because the clutch is only partially engaged. Replace the clutch master cylinder if that is the case. If it is right then the fault will be in the pressure plat/ cutch plate and it may require a clutch kit.

Feb 05, 2014 | Cars & Trucks

1 Answer

Clutch was replaced a year ago and now when i push the clutch it wont allow me to change gears and it sounds like an air pump


Hi,
That sounds like you have a problem in the pressure plate! Go to the nearest garage and pull down the transmission to replace the clutch assembly. But if you could get the warranty from the one who replace the clutch, inquire about it. Mostly the mechanic would replace the clutch assembly( clutch disc, pressure plate, and release bearing ). So that it will be a one time job.
Either you could tow your vehicle to the nearest garage or drive it( before starting the engine put the gear to 1st and let it start, slowly at 1st gear you could drive into the nearest shop ).
Hope that helps you out!
thanks for using FixYa!

Jun 27, 2011 | 1998 Toyota Tacoma

1 Answer

I have 1997 Toyota tacoma v6 4x4 I replaced clutch drove next day with no problems got in following and now won't engage/ disengage from gears. if turn off I can put in first or reverse but struggles....


Check the clutch master cylinder and the clutch slave cylinder for proper operation... chances are the slave is bad.. I think this is located on the passenger side of the tranny.. you may have lost fluid during the install.. or introduced air into the system.

If you needed a new clutch.. it was probably time to at least flush that system and or replace the slave cylinder.. also check the spring on the clutch pedal..

I hope you replaced the throw out bearing and pressure plate when replacing the clutch.. I suspect you did.

Best of luck

Mar 26, 2011 | 1997 Toyota Tacoma

1 Answer

How do i remove the manuel clutch to a 1998 tacoma


If you want to change the "Remove clucht trasmision bars front and rear, remove the cylinder in the booth attendant said you have to remove the gear-change broadcasts have jack-remove the bracket that supports the transmission back-to remove the exhaust pipe - Put the jack, remove the screws that attach the transmission with the engine off, remove the transmission clucht well ... You have to ensure the transmission on the jack will not fall

Jan 11, 2010 | 1998 Toyota Tacoma

1 Answer

2005 Toyota Tacoma Gearbox shifting loose and unable to shift up to 1, 3, 5 and R. Clutch seems good except for shifting gear.


You may possibly have a defective clutch slave or master cylinder. Get this fixed immediately as it will cause problems with the gear box.

Dec 01, 2009 | 2005 Toyota Tacoma

2 Answers

Slips out of 1st and 5th


Have you checked your transmission fluid level and your transmission filter? That's a common cause of slippping.

Sep 27, 2009 | 1996 Toyota Tacoma

1 Answer

Clutch issue? 89 toyota PU 4x4 V6 150,000 miles


Yep, you got it. Assuming spring tension on pressure plate feels normal (you should know with 150k mi) then the clutch disk is worn. Time for replacement.

Jun 22, 2009 | 1991 Toyota 4Runner

2 Answers

1997 Toyota Tacoma v6/4x4/manual: Clutch petal/Clutch


I currently have a 1998 Toyota Tacoma, and the clutch pedal does not return all the way. I know it is not the clutch, it is actually the spring located underneath the pedal. It is catching and not releasing after pushed.... Hope it helps.

Jun 19, 2009 | 1998 Toyota Tacoma

Not finding what you are looking for?
2005 Toyota Tacoma Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...