Question about 1994 Mercury Villager

2 Answers

I'm having problems with the front fan (the rear works)... sometimes it won't come on when I turn it on... if I leave the dial on, it will usually kick in after a while. Sometimes if I hit a bump it'll suddenly pop on. Perhaps something loose? Electrical? If so, is it something I can fix myself?

Posted by on

  • henrickr Oct 02, 2009

    All speeds are iffy... it's the whole front. When it does work though, all the speeds do work.

  • henrickr Oct 02, 2009

    Is this expensive to have done?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 811 Answers

Check electrical connection on back of switch, or replace switch if faulty 

Posted on Oct 02, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Any speed?? when it does work, do all the speeds work? if so, you will need to replace the fan motor.

Posted on Oct 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front turn signals won’t work rear ones work but fast have checked everthing can’t find a relay under dash


Replace bulbs in front would be the 1st thing. If that doesn't fix it check the wiring between the switch and the front turn signals. The rear ones flash fast to indicate a problem with the front signals. Usually the bulbs are out in the front.

Nov 04, 2017 | Cars & Trucks

1 Answer

Air fan won't work


It is doubtful but maybe.. Check all the fuses and see if you have a blown fuse. If so replace fuse and see if that fixes your problem.

Jan 30, 2013 | 2010 Ford Escape XLT

1 Answer

Rear blower: only works on high when set on cold, won't work at all when set to heat


I would start with the rear blower motor resistor, the resistor is what controls the speed of the fan, the resistor is located in the rear heater box near the blower, you will need to remove the right rear side panel to access the heater box. start with that

Dec 07, 2012 | 2004 Honda Odyssey

1 Answer

2004 Chrysler Pacifica Blower won't work


Usally when a blower motor resistor goes bad the fan still runs on high. The resistor lowers the voltage going to the fan to make it run slower. The high setting usually goes straight thru. Resistors are usually easy to get to, under good on the firewall or under dash passenger side. Cost about $24 at parts store. Replace with new if that doesn't work return it.

Aug 29, 2012 | 2004 Chrysler Pacifica

1 Answer

Left turn signals won't flash, Right side works fine. Replaced front and rear turn bulbs (rear was burned out). Bulbs come on fine on the left side, they just won't flash.


Gday mate, we had a problem with another late model vehicle similar to that, the bulb that was put into the reverse light was not exact brand product ( ohmage was slightly wrong ) and fowled up computer, correct bulb in place and disconnect battery to reset K A M ( keep alive memory) problem solved, BEWARE, some vehicles cannot have KAM reset except for dealer computer tethered reboot , just try putting the factory correct bulb(s) in and see how it goes, geoff. hope this helped.

Feb 11, 2012 | 1998 Buick LeSabre

1 Answer

I have a 2006 Dodge Grand Caravan. Recently the front blower fan began to work intermittently. Sometimes it would work only on high, sometimes any speed, sometimes only when the rear blower was off. Now...


I think your headed in the right direction. At the front blower motor, the black wire is voltage and the dark green wire ground. As you can see the thermal fuse and resisters are on the ground circuit for blower motor , the speed controls are also on the ground circuit. Any motor that uses brushes, sometimes you can tap on the blower housing and it starts running, or driving down the road and you hit a bump and it takes off. Your jumper wires should have worked, in my opinion. If you wired it up backwards, I don't know if blower motor would run backwards, I never tried it. In the past, with faulty blower motors, I took it apart and looked at the brushes, wore down to the nub.
front blower-o2cfjz54o5phdzfp1iczxtj3-1-0.jpg

Mar 13, 2017 | 2006 Dodge Grand Caravan

2 Answers

2004 chyrsler pacifica front fan stops on high


Replace the resistor in the front fan system.

Nov 12, 2017 | 2004 Chrysler Pacifica

3 Answers

Heater stopped working today. Rear still working but not alot.


2005 Chrysler T&C Van. My front blower also stopped working overnight. Rear blower works fine. I swapped the 40A fuse in the underhood fuse box with the 40A fuse for the power seats since I don't have power seats. No help. I then swapped the front blower relay with the spare relay in the same box. No help. I'm wondering if there is a reset button for the blower and if so where it may be. Any hint or help with the blower would definiely be appreciated. Thanks

Jan 02, 2009 | 2005 Chrysler Town & Country

1 Answer

AIR CONDITIONER


On most vehicles with front and rear A/C, the two systems are basically independant of each other just sharing the compressor and condensor. It is possible that the Mode Door (controls where the air flow is sent; ie: windshield, vents, floor) is out of adjustment or sticking.

May 20, 2008 | 2004 GMC Savana

Not finding what you are looking for?
1994 Mercury Villager Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...