Question about 2000 GMC Yukon XL

1 Answer

How to replace the blower motor fan assembly in a 2000 GMC Yukon XL K1500 4X4

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 2,984 Answers

Blower Motor Removal & Installation Delphi
Blower Motor Replacement (Delphi)

how to replace the blower motor fan assembly in a - 1fb4643.gif
To Remove:

  1. Remove the instrument panel sound insulator panel (if equipped).
  2. Disconnect the electrical connector from the blower motor.
  3. Remove the blower motor insulating cover screws.
  4. Remove the blower motor insulating cover.
  5. Pull the retaining tab down and rotate blower motor counterclockwise to remove.
To Install:

  1. Position the blower motor and turn assembly clockwise until tab locks in place.
  2. Install the blower motor insulating cover.
  3. Connect the electrical connector to the blower motor.
  4. Install the instrument panel sound insulator panel (if equipped).

Visteon

Blower Motor Replacement (Visteon)

878e8d8.gif
To Remove:
  1. Remove the instrument panel sound insulator panel (if equipped).
  2. Disconnect the electrical connector from the blower motor.
  3. Remove the blower motor screws.
  4. Remove the blower motor from the HVAC module.
To Install:
  1. Position the blower motor and install mounting screws.
  2. Connect the electrical connector to the blower motor.
  3. Install the instrument panel sound insulator panel (if equipped).

Posted on Oct 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 GMC Yukon XL blower fan intermittently doesnt turn on


Could be the blower motor, the resistor, or the control on the dash.
You'll need to check the circuit for voltage when it fails to work.

Aug 18, 2012 | 2003 GMC Yukon XL

1 Answer

My 2001 yukon front AC fan only blows on high setting. nothing on the other fan settings.


Replace the blower motor resistor located in the blower housing under the dash on the passenger side and you will be good to go.


360dreamworx_54.gif

Aug 26, 2011 | 2001 GMC Yukon XL

1 Answer

2004 yukon xl the fan only works on high. was told it is the resistor. where is this resistor located?


the resistor is located in bottom of heater box under right side of dash it will be close to blower motor. the wires from blower motor go to resistor. check the plug and replace it as well they tend to melt

Mar 12, 2011 | 2004 GMC Yukon

1 Answer

Mu 2002 Yukon XL 1500 SLT defrost fan runs all of the time, including when the car is turned off and the key is removed.


You have a faulty blower motor resistor and wiring harness. If you pull the fuse for the HVAC blower thats in the fuse panel under the hood, that will stop the blower and keep it from killing the battery.
The blower motor resistor is under the dash on the passenger side. Remove the plastic hush cover under the dash and you'll see the resistor and the wiring harness assembly attatched to the duct just next to the blower motor. It sits right above where the passengers feet would be.
The dealer has upgraded the wiring and they will sell you a harness kit along with a new resistor. this is a very common problem and is relatively easy to fix. Use a bit of dielectric grease on the plug connections and when you splice the new harness in to avoid any future corosion of the connections.

Jan 09, 2011 | 2002 GMC Yukon XL

1 Answer

2000 yukon xl, the fan switch only worked on 5, now its not working at all. the passenger side defrost fan was making a squealing sound. help


needs a blower replacement located under dash on passenger side remove glovebox and take out screws holding cover on .unplug wiring harness to fan ad replace blower

Sep 18, 2010 | 2000 GMC Yukon XL

1 Answer

Front air conditioning not blowing back air conditioning fine


Could be a fuse or a relay,, or the fan switch,, or the blower motor..

Hope this helps !!
Please rate me good ;o)

Jul 10, 2009 | 2000 GMC Yukon XL

1 Answer

Fan blower stopped working on my 2006 yukon denali xl


check fuse,blower motor relay and blower resister(mounted in blower box) and blower motor

Jun 28, 2009 | 2006 GMC Yukon Xl Denali

3 Answers

The heater fan in my 2003 GMC Yukon XL will not turn off, even after the key is turn off, and the door is opened.


I don't know if you already fixed it, but I had the same problem on my 03 yukon, TysonRicky is right. In my case it was the blower control module. You can find it right under the glovebox. It cost me close to $100 for a new one, but very easy to replace. Can't even imagine how much it would've cost me if I had a mechanic do it.

Dec 08, 2008 | 2003 GMC Yukon XL

Not finding what you are looking for?
2000 GMC Yukon XL Logo

3,074 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...