Question about 1991 Honda Accord

3 Answers

How to install rack and pinion bellow boots on 1991 honda accord

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Honda Expert
  • 268 Answers

Inside the boot toward to rack (inner tie rod) there is a washer that has to be removed. Then you'll be able to see the wrench contact area that has to be removed to release the inner tie rod from the rack. Then just put it all back together, don't forget the washer lock. Turn the steering wheel as far as it will go according to which sides you're working on at the time to get the most comfortable access.

Posted on Oct 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you take a rack and pinion out of a 95 honda accord 4-cylinder?

Posted on Dec 04, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you change a rack and pinion on a 1991 Honda Accord Ex?

Posted on Apr 19, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I keep bursting rack & pinion boots, does that mean my power steering pump is bad


no, if you have power steering fluid leaking into the boot it means your power steering piston/rod/cylinder has leaking seals.
replace the cylinder (what you attached the boots to) or rebuild the packing.

Jan 03, 2015 | Chrysler Pacifica Cars & Trucks

2 Answers

What are bellows boots on a honda


the bellows are the the plastic tubes that protect the inner tie rod end/rack from dirt and water. If there is fluid coming out of the bellows than the rack is leaking. The normal repair is to replace the rack with either a remanufactured or new rack and pinion.

Dec 29, 2011 | 1998 Honda Accord

1 Answer

I have a major power steering leak i cant track and its not coming from the pump


What can commonly happen is the seals inside the rack and pinion and allows the fluid to fill the bellow boot(accordion boot). Take a small pick and poke the boot on the steering linkage. If fluid pours out, replace the rack and pinion unit and then have it aligned. If you need further instructions, feel free to let me know.

Oct 10, 2010 | 2004 Kia Sorento

1 Answer

WE HAVE A HONDA ACCORD LX 1991 THE STEERING HAS GOT VERY STIFF YU CANNOT MOVE IT SOMETIMES


this problem is caused by a failed rack and pinion steering gear failing

May 28, 2010 | 1991 Honda Accord

1 Answer

Change cv boot kit rack and pinion


first you have to remove outer tie rod then you can slide the boot into place then re install the tie rod try not to move jam nut so that your alignment wont change.

Feb 02, 2010 | 1992 Honda Accord

1 Answer

Installing steering rack and pinion, exhaust in way. bolts almost welded. Need alternate way to get around it.


www.haynes.com is a great place to buy a book that will explain how to fix your problem
with pretty pics and every thing

Jan 03, 2010 | 1991 Honda Accord

1 Answer

How do i change inner tie rod , do i need a special tool.


i think steering gear has to be removed to get rubber bellows off to access tie rod.

486d579.gif Section 11-02: Steering System, Power 1997 Continental Workshop Manual
DISASSEMBLY AND ASSEMBLY Tie Rod and Bellows SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Bench Mounted Holding Fixture T57L-500-B
Disassembly
  1. NOTE: Drill out mounting holes in holding fixture with a 9/16 inch drill to allow the power rack and pinion steering gear assembly mounting bolts to fit.

    Mount power rack and pinion steering gear assembly in Bench Mounted Holding Fixture T57L-500-B.
  1. Remove tie rod ends (3A130).
  1. sve~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use care not to damage bellows. If bellows are damaged, this will allow contamination into the steering gear and cause leakage.
    Remove four clamps retaining bellows to steering gear housing (3548) and front wheel spindle tie rods (3280). Discard clamps if damaged or excessively corroded.
  1. NOTE: Steering gear does not use rivets or roll pins between the inner front wheel spindle tie rod and rack.

    Remove bellows along with power steering gear rack tube (3K762).
  1. Position power rack and pinion steering gear so that several steering gear teeth are exposed. Hold steering gear sector shaft (3575) with an adjustable wrench on end teeth only while loosening ball joint nuts.
Assembly
  1. Expose several steering gear teeth and hold steering gear with adjustable wrench.
  1. Tighten each front wheel spindle tie rod separately to 90-110 Nm (67-81 lb-ft).
  1. Thoroughly clean steering gear and steering gear housing bore of any foreign material. Any abrasive material is extremely harmful to high-pressure oil seals.
  1. Apply Steering Gear Grease C3AZ-19578-A or equivalent meeting Ford specification ESW-M1C87-A to groove in front wheel spindle tie rod where tie rod bellows clamp to front wheel spindle tie rod and uniformly to inner diameter of tie rod bellows before installation. This allows for toe-in adjustment without twisting tie rod bellows.
  1. Install tie rod bellows and power steering gear rack tube. Make sure power steering gear rack tube is positioned as shown.


    Power Steering Gear Rack Tube and Tie Rod Bellows Installation

Apr 04, 2009 | 1997 Lincoln Continental

1 Answer

What do bellow boots do?


all they do is keep dirt and water from getting into the steering unit, they are seals, if your steering is acting up it is to late, the damage has been done by the torn boot.

Feb 19, 2009 | 2002 Mitsubishi Lancer

1 Answer

Power stearing luquid leak (Honda Accord 2002 50K milage)


aside from any obvious leaks from the hoses or fittings, or the pump. typically if you were to pull the rubber dust boots of the ends of the rack, any fluid inside the boot would indicate a bad rack. hope this helps.

Dec 14, 2008 | 2000 Honda Civic

Not finding what you are looking for?
1991 Honda Accord Logo

1,602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...