Question about 2005 Chrysler Town & Country

1 Answer

05 town and country needs upper oxygen sensor. doe this need a trained mech or can i shade tree it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,982 Answers

If you can get a wrench on it, there's no reason that you couldn't change it. Make sure you put anti-seize compound on the threads before installing new one, or you will never get it out again. Be aware: changing O2 sensor often does not fix a problem as exhaust content can be beyond sensors range and will cause false trigger, caused by another item in fuel system etc.

Posted on Oct 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Powakaddy wiring diagram


I found this - - it only shows two sensors. If you have more than two you may have to buy a shop manual from Ebay to get the factory diagrams.
Photo courtesy Autozone.com
7b79b59e-3083-4cc3-a7a7-a312a5906766.gif

May 25, 2013 | 2008 Chrysler Town & Country

1 Answer

Where is the oxygen sensor located?


There are 3 O2 sensors on your car model. Two upstream sensors and one down stream sensor. Upstream are before the catalytic converter and downstream is after the catalytic converter. Its screwed into the exhaust pipe. ---------

Right bank upper sensor which is on the side of the engine closer to the fire wall and mounted on the exhaust manifold, right in the middle above the exhaust pipe.

------------

This will help.Thanks.Helpmech.

Oct 07, 2011 | 2001 Chrysler Town & Country

1 Answer

How many oxygen sensors are there on chrysler town and country with 3.8 engine? thanks


There are 4 O2 sensors on your car. The upstream and downstream sensors are different. Is there a problem we can help you with?

Nov 22, 2010 | 2002 Chrysler Town & Country

1 Answer

P0032 Oxygen sensor heater problem. This is on a 2004 Chrysler Town and Country 3.8 L V6.


The sensor in question is behind the engine on the exhaust manifold.

You can test the heater in the sensor with an ohmmeter using the following procedure:
  1. Disconnect the electrical harness from the sensor.
  2. The white wires in the sensor connector are the power and ground circuits for the heater.
  3. Connect the ohmmeter test leads to the terminals of the white wires in the heated oxygen sensor connector.
  4. Check the resistance of the sensor, if it is not within 4-7 ohms, replace the sensor.
  5. ea87f67.gif

Oct 24, 2010 | 2004 Chrysler Town & Country

2 Answers

I want to do a tune up on my 2001 town and country.What do i need to do to get at the back spark plugs?


They are often easiest to change from underneath at the backside of the engine which is very hard to do unless you have it on a hoist.

Jun 01, 2010 | 2001 Chrysler Town & Country

2 Answers

Oxygen sensor1 bank1, need to be location


the first one on the right hand side before the catalytic converter

Mar 13, 2010 | 2001 Chrysler Town & Country

1 Answer

Where is the oxegen sensor located on a 2000 chrysler town and country 3.8 liter. does the oxegen sensor have a fuse


the oxygen sensor is located in the exhuast pipe,there could be more than one sensor, maybe 4 sensors on a 6 cylinder car and 2 sensors on a 4 cylinder car,so youre gonna have to know which one is bad,if the check engine light is on it will tell you which position sensor is bad like bank 1 sensor 2 something like that,also there is NO fuse for the o2 sensors

Oct 19, 2009 | 2000 Chrysler Town & Country

2 Answers

I need location of oxygen sensor on a 2001 town & country


ALL of your oxygen sensors are located i your exhaust system Your exhaust system starts at the exhaust manifold on the side of the engine and ends at the tail pipe by you back bumper. Your vehicle oxygen sensors are 4 of them there are two on each side of your exhaust the are actually screw into the exhaust they are like the nose of you engine to read how rich/lean the car is running. The are pretty simple to replace, they look kinda like spark plugs with wires attached to them the wires are usually colored white black and grey with plug connections on the end. To replace get a oxygen sensor socket and a ratchet and unscrew this socket can be bought at almost any auto parts place like auto-zone etc. Good luck and thanks for using FIX YA

Mar 22, 2009 | 2001 Chrysler Town & Country

1 Answer

Motor noise in 2006 Town & Country 3.8 l


if it sounds like a toy train its probably your idler pulley i had same problem

Jul 30, 2008 | 2006 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

Related Topics:

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...