Question about 1990 Acura Integra Hatchback

2 Answers

I need help installing the front passenger window in my 1990 acura integra rs. can anyone help?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 82 Answers

Do this in the following order:

Remove the door trim (handle and various pulleys)
Pop out the door trim from its side (they are pressure nibs that hold it in place...just give it a firm yank in the corner and follow it around until the trim is loose.
Lift the trim up and out.

If you are only replacing the window and not the regulator arm then all you need to do it shift the window (uip / down) until you can see the two bolts holding the glass in place.

Undo those bolts and pull the window out.

Slide the new window in and tighten the bolts.

Install the door trim by reversing the process above.

Posted on Feb 23, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Acura Expert
  • 268 Answers

Remove the interior door panel being careful with the switch wiring. You might have to hook up your power window switch over and over to gain access to the (2) 10mm bolts holding the window on the regulator arm.

To put the window in, be careful when fitting it in that you don't get stuck and end up braking the cast/plastic guides that are fastened to your glass. Get it in there, make sure it's lined up in the track and install the 10mm bolts. Don't put the entire interior panel on until you test it. You might have to hold it a little bit while you test it because the inner weather seal kind of helps keep it stable while;e going up and down. Good luck.

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1990 Acura integra rs. I changed the fuel pump,fuel relay,and fuel filter. It started when I sprayed gas into the injectors, but it won't start on its own. What else can I do?


Along the firewall there is a pressure test point (looks like a tire valve) push the valve in to see if there is fuel and pressure.

I'm guessing there is NOT if you can spray fuel and start.

If there is you may want to get a pressure gauge and make sure the pressure is high enough.

If NOT, you need to chase back why you don't have pressure.
is there power to the relay ?
Is the relay switching ?
Is there power to the pump ?

Apr 14, 2015 | 1990 Acura Integra

2 Answers

90 integra passenger power window rolls down but not up


Window tract system broken .new one can be obtained from any auto parts house.

Sep 16, 2012 | 1990 Acura Integra Hatchback

1 Answer

Need blower diagram


Here is a link to a blower diagram for a 86 Acura Integra


http://www.google.com/imgres?imgurl=http://www.dealerdirectparts.com/v/vspfiles/photos/4801069.gif&imgrefurl=http://www.dealerdirectparts.com/1986-ACURA-INTEGRA-RS-HVAC-Blower-Motor-p/acura-4714-integra-rs-5.htm&h=507&w=472&sz=8&tbnid=wFgCA25NPRaQAM:&tbnh=233&tbnw=217&prev=/images%3Fq%3D1986%2BAcura%2BIntegra%2Bblower%2Bdiagram&zoom=1&q=1986+Acura+Integra+blower+diagram&hl=en&usg=__Rwnb9UhNzi9Fg8l94Q4fvcLJd6Q=&sa=X&ei=w2JzTafUL472tgO_muG2Cw&ved=0CB0Q9QEwAA

Mar 06, 2011 | 1986 Acura Integra

1 Answer

91 acura integra leaks in front passenger side


They have a problem with the rubber inserts that help hold the cover to the air ducts. You need to take the wiper arms off and the main cover and check under that. If they are dry rotted or broke you need to replace them, I think theres six or seven of them.

Apr 12, 2010 | 1991 Acura Integra Hatchback

1 Answer

Engine dies on a complete stop and battery ligt turns on.


change the idle air control solenoid. very common for this to stall the car at idle. once going it is not in use. best of luck

Aug 07, 2009 | 1990 Acura Integra Hatchback

1 Answer

1993 acura integra passenger side window fail


your passenger window i would just start pulling fuses and see which one is blown if none of them are blown then your looking at a window switch problem or a window motor

Jun 08, 2009 | 1993 Acura Integra Hatchback

1 Answer

1990 Acura Integra Vin codes


The vehicle grade is denoted in the 6th digit, in your case "4" indicates an RS model.

Oct 19, 2008 | 1990 Acura Integra Hatchback

Not finding what you are looking for?
1990 Acura Integra Hatchback Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...